7 inch reel to reel. 1 high bias / EQ for 7 1/2 lbs. 2 low bias / EQ for 3 3/4. Recent new belt & pinch roller. Excellent wow flutter. 0 dB playback #7 is 0 dB professional 0 dB level. (10 dB higher than typical consumer). Low use. With Teac front cover with repairer 1 inch. Front arm minor bend. Excellent calibration. Condition 8+.
Contact us about similar items or replacement parts.
Gray face meters, Gray plastic front panel, Multi AC Voltage version, 6 settings, With smoked front dust cover #7 condition, Heads #8 condition, speed board caps replaced, All electrolytic caps (about 20) in audio and power supply replaced, most tantalum on preamp boards left in as they test OK many replaced as needed, high quality version, unit has typical low frequency enhanced bass EQ response of Revox, All calibrated for Maxell UD tape, excellent performance/spec, (unit auto shutoff sensor is weak operation), #8+ condition
Heads 80% good and good wear path, new belt, new bulbs, all cleaned and calibrated to NAB standard, Set Bias and EQ for Maxel tapes, Unit has minor corrosion spot on left Side of case, no rack rash face 90%, #8 Condition CALL FOR COMPETITIVE PRICING
Contact us about similar items or replacement parts.
Auto reversing 7 inch reel to reel, heads are 95% good, cleaned controls, no rack scratches, needs belt. Condition #9
Open reel tape recorder, silver/black trim w/ wood side panels, 7.5 in reels, 7 1/2 & 3 3/4 IPS, heads are 90%, large lighted VU meters, 0 DB is at output mark, 2 position bias/Rec EQ, 2 mic inputs 1/4", headphone output 1/4", serviced cleaned and calibrated to NAB standard, excellent calibration speed, minor little wood chips at corners, condition #8+
Contact us about similar items or replacement parts.
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs.
Right tension arm assembly complete, possible replacement assembly can be made available for $58 NOT IN CURRENT STOCK
Contact us about similar items or replacement parts.
3 Head Deck, best version, virtually unused, new capstan belt installed, pinch roller replaced like new, Heads are #9+ condition, virtually no use time, speed spec perfect, #8 output level is odb meter, -10DB output for consumer line level, (Use LH1LH for Maxwell Tape record) all switches completely cleaned, Unit has supply side roller with proper cosmetic cap replaced, unit works perfect #9 Condition
Contact us about similar items or replacement parts.
10 Inch 7 1/2 or 15 IPS. Unit Calibrated to pro standard NAB. High Bias and EQ for 15 IPS, Low bias and EQ for 7 1/2 IPS. Set up for maxell UD35 or Ampex 456. Heads 85% good(This means the record/ erase/ play heads on the unit have very little wear, about 10% worn so a good wear path from low tape use is established. This can be a good thing as now the pitch can be more precisely calibrated on the tape and record/ play quality will be excellent for a long time (10-20 years) before heads wear to 50/60% good. Then calibration should be done again) Reels and tables in nice condition. Excellent face but typical light, superficial finger wear. Very clean wood sides. Main belt replaced. All controls and switches cleaned twice. . #8+ condition.
Contact us about similar items or replacement parts.
Mint condition with original box packing and ops manual, 10" reel capable unit, with (2) clamp-on NAD hub adapters (not twist lock kind) 3 3/4 and 71/2 IPS. Full service By Audio Pro, controls cleaned, perfect belts, and pinch roller serviced. calibrated to NAB standard, #8 on output control is 0db standard play back. Super near perfect calibration. High bias & EQ is for 7-1/2 ips, Low bias & EQ is for 3-3/4 ips. # 9 condition
Four (4) available, 35-180 UD, Used tape, Tests OK for shedding, Known customer kept tape in good storage, Condition 8+
407, 1/2 Inch Test Tape, Audio Pro Made Tapes *1 KHZ at ODB speed Calibration, Tascam will read -10 db, output, (0-600 Counter), Otari will read -5db on meters, Condition #9
We are a very different kind of shop. To help ensure a smoother experience please read our letter about our current shop policies.
DBX Encoder Cable, 11-pin connector, 24" Cable, Condition #9
Function Play, rewind etc. complete board, relays etc. RWS-051, CMK-60Y, RNP-342, color wires attached. Low use, condition: 9
Reproducer calibration tape. 1/2 inch, 15 IPS EQ IEC-1 Ft = 0 & 4500 Hx. 250 NWM/M. Multi frequency 0dB. 8+ Condition Low Use. May be slightly sticky at some areas. $120 each.
Remote with 20 foot cable. LIKE NEW #9 Condition
For X-1000. Remote control and cable for many models, does auto-reverse, rec. 20' cable with 12 pin rectangular connector. Tested, very low use, very minor finger wear, #8+
almost like new, in origional box, a little worn.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
in excellent condition, cleaned 10 pin connector, 17 foot remote cable.
#5378301400. Excellent #9 condition with no use.
remote controlled unit with 12 pin rectangular connector, 16 foot cable, record-pause/record mute buttons, condition 8+
Power Supply Board PB9A171B. Crucial parts replaced and updated. From well used but operational deck with color code connectors left intact. ( Board update and power supply caps - $88 value ) #8 Condition.
wire recorder, maroon case, with wire, working but needs basic cleaning and lubing when put back into operation, condition 8+
REC/ Play head. 8 Track, 8 Channel. SS: 53783004. 90% Good head. #9 Condition.
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
part #53783004 with cable and complete platform. 8 track heads in #8 condition. Relapped heads only 30% worn. These are the "cut away edge" and triple guard band shielded, latest high quality version heads.
Stereo 1/4 Track Format, 3 3/4 and 7 1/2 speeds, Face and knobs - cosmetically very good. Wood cabinet has crack on top surface. Cleaned all switches and controls also counter belt. Adjusted break bands, cleaned heads (25% worn), guides rollers, calibrated unit for modern maxell XLI, Excellent mechanical condition.