4 track 1/4" deck, 10" reels (hub adapters may be available-for additional cost) , headphone monitor with channel select and volume, jack for RC-70 remote control, pitch, simulsync. Calibrated for Maxell UD-XL Ampex 456 tape. Excellent #9 condition machine, 90% good heads, with very good #8 condition cosmetics. CALL FOR COMPETITIVE PRICING
Auto locator and cable. Very good #9 condition with very minor surface scuff and ding in bottom corner of remote. LED tips have cracked off display holes, need little bezels installed to be more visible.
4 track 1/4" format. Features include: high/low speed, normal/high EQ/bias, 2 and 4 channel playback. 4 1/4" inputs on face, 2 Stereo RCA in/outs. Missing normal/simulsync on track 1. Excellent cosmetics and heads. Needs basic cleaning and calibration. Unit is worth Heads, Motor, Reel Tables,Headcover etc.
part #53783004 with cable and complete platform. 8 track heads in #8 condition. Relapped heads only 30% worn. These are the "cut away edge" and triple guard band shielded, latest high quality version heads.
REC/ Play head. 8 Track, 8 Channel. SS: 53783004. 90% Good head. #9 Condition.
All Remotes are now 25% off or Free Shipping!!! (Reel to Reel remotes excluded).
wire recorder, maroon case, with wire, working but needs basic cleaning and lubing when put back into operation, condition 8+
Power Supply Board PB9A171B. Crucial parts replaced and updated. From well used but operational deck with color code connectors left intact. ( Board update and power supply caps - $88 value ) #8 Condition.
remote controlled unit with 12 pin rectangular connector, 16 foot cable, record-pause/record mute buttons, condition 8+
#5378301400. Excellent #9 condition with no use.
in excellent condition, cleaned 10 pin connector, 17 foot remote cable.
almost like new, in origional box, a little worn.
Check us out on facebook.
For X-1000. Remote control and cable for many models, does auto-reverse, rec. 20' cable with 12 pin rectangular connector. Tested, very low use, very minor finger wear, #8+
Remote with 20 foot cable. LIKE NEW #9 Condition
Reproducer calibration tape. 1/2 inch, 15 IPS EQ IEC-1 Ft = 0 & 4500 Hx. 250 NWM/M. Multi frequency 0dB. 8+ Condition Low Use. May be slightly sticky at some areas. $120 each.
Function Play, rewind etc. complete board, relays etc. RWS-051, CMK-60Y, RNP-342, color wires attached. Low use, condition: 9
DBX Encoder Cable, 11-pin connector, 24" Cable, Condition #9
407, 1/2 Inch Test Tape, Audio Pro Made Tapes *1 KHZ at ODB speed Calibration, Tascam will read -10 db, output, (0-600 Counter), Otari will read -5db on meters, Condition #9
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
Four (3) available, 35-180 UD, Used tape, Tests OK for shedding, Known customer kept tape in good storage, Condition 8+
4 track, pinch control, smooth running, transport heads 90% or better. Low, 7 inch reel. 7 1/2 IPS 15 IPS excellent performance. Recent new belts, pinch roller, complete/calibration. Setup for ampex 456 maxell UD tape. 9 condition.
Intact machine that needs proper service. Good pinch, fresh drive belt, all meters light up and respond. However, the motor is weak and there are missing channels. Has hub locks (screw type). Cosmetically good, recommended for a complete overhaul. Condition: 8+
10" Reel, Direct drive motor system with 10" NAB Akai hub adaptors ($80 value). 7 1/2 / 3 3/4 speed stereo 1/4 track. The Wood Case is #9 condition. Very clean machine and Very slight (almost not noticed) oxidized stain on some areas of meters and controls with one minor scratch on head cover. 50/60Hz/ 100-240V operation. Pinch roller good with 1 minor dent, very reliable design. All calibrates to within +-/db both channels to 15kHz
Contact us about similar items or replacement parts.
2 track 1/4 record play. Has switch on top of head with internal speed switch - does 15, 7 1/3, 3 3/4 (internal switch reset motor speed). Has old side Otari press fit hub adapters. Heads are 75% good. Unit has been cleaned and calibrated; we re-soldered the power supply board and motor board; calibrated to semi-pro level for use with all kinds of tapes. All mechanics are good. Better side boards. Face cosmetics are nice. Overall, there is obvious wear all over, but this is a good performing machine. #8- condition
Contact us about similar items or replacement parts.
Excellent performance. Mic inputs, mixing. 7" reel. 3 3/4 & 7 ips. Nice compact RtoR. Serviced +85% heads + excellent heads calibration.
Contact us about similar items or replacement parts.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
For Parts or Service. Auto Reverse. Excellent condition, but unserviced. Basic switch cleaning done. Needs belt. Great for hobbyist who wants an inexpensive reel to reel. Has one channel out (preamp in). 8+/10 condition.
4 track simulsync 1/4 inch tape. Pitch control. Metal Reel, Pitch Control, Hub Adapters, All channels within 1db tracking. Complete clean calibrate (1 meter replaced) 8/10 Condition, heads are at 85%, no feet on back or bottom #8+ Condition
