This version has extended RAM buffer for excellent error correct. Good for archive retrieval. Used many times with no problems - 800 hours. Perfect condition. RF signal from head is absolutely perfect, but always reads 100-200 error count. #9 condition
20bit ADAT machine in excellent condition with only 102 hours of actual head use! One minor dent on front top edge. Fully serviced and tested, with AP updates and all Alesis updates, new belts and roller. You won't be disappointed!
Pro Machine, better reliable transport, full feature, RCA in/out, COAX, Optical in/out. Unit has seen virtually no use time, rack mount and original remote. super bit mapping or standard 44.1 and 48 Sony "long Play" #9+ condition
Full feature DAT Machine rack Mount design with Original Remote. analogue XLR IN & XLR OUT, AES/EBU & S/P DIF optical digital connectors IN & OUT. Bench tested all OK, Low use time unit with original owners manual. #9 condition
8 track digital recorder, SN FX8000043. Low use hours, version 1.03 EPROM update. Basic manufacturer updates, RF head capacitor update. Lettering worn on "stop" and "power" buttons. Completely cleaned, serviced, and calibrated. Heads still 90% good.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
(This is NOT an XT20) 18 bit machine. SN 3030999. 800 hours use time but unit head in near perfect condition. Basic mods (by Alesis) done. Excellent head and RF carrier recovery. We have used this machine for assistance in ADAT archival retrieval. All Tested clean & calibrated. Condition 9
with drawer assembly, RF Head Excellent, 90% good (worth $200 alone) #9 Tested good working pinch roller #8 (Please be aware these are very thoroughly serviced and tested with difficult tapes, but some ageing DAT tape get sticky or warped shells can be problematic.) (3) available
With ADAT remote, sync cable, optical cable link. Very low use time. 100s of hours. Basic service has been done. New belts and drive idler. Condition is a #9.
High quality DAT player, Panasonic pro transport, full function machine, black, minor scratches on cover, low test calibrate perfect, condition #9
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Black face older machine with very low use hours. Excellent #9 condition with all ADAT updates. 8 1/4" analog ins/outs, Rewind/FF/Play/Stop/Record functions. Rack mountable.
for SV-3700 or 3800, complete loading drawer and basket. Excellent #9 condition, tested, low use time.
Rack kit for DAT machine. Fits SV-3800 as well. Beige color, with hardware kits, has minor dings and scuffs, #9
Digital/Analog converter main board. Complete in excellent condition.
Good loading basket assembly. Has a tape engage problem. Smaller mechanics intact, head and head bearing may be worn. Missing some hardware. Selling mainly for face, knobs, and jog wheel. Call for more details. Condition: 8
pinch roller and pinch arm assembly for DAT machine. Used only in stock. Nice condition . Be aware of Panasonic 3700 3800 problem where tape slips out of pinch roller when rewind scan of tape is engaged. It is usually due to spring tension of the pinch roller is weak. The spring is located at the bottom arm end and is difficult to install.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
for DAT machine. (2) Tape guide roller with base and stem "prong" New stock. (this is NOT a "pinch roller") For pinch roller see item # 61639.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Sold as is, usable for parts, display, battery pack, etc. This unit has been partially disassembled, but all parts are intact.
For SV-3700, SV-3800, and others. Marked RPRF TD101. With shield and wires. Excellent condition.