2 sets rack. Cleaned all front panel switches, play and rec. Calibrated controls, calibrated for 0 dB. Checked calibration .5 dB difference max between channels. Checked crosstalk, 3 mv internal between record in and play out max. Mint Condition.
Auto correlator noise reduction system with Rev 6 modifications, low noise TLO75 IC update, some capacitor update. Dynamic range recovery system. Wood case, vintage knobs. Low frequency calibration. 9/10 excellent condition.
8-channel Noise reduction System! Has 8 DBX 410 cards. Mint condition.
4-chan noise gate/expander for pro use. Balanced XLR in/out with unbalanced 1/4 in/out. Key input. Fully tested and cleaned. #9 condition with some minor rack rash. With manual.
8-channel Noise reduction System! w/ 5x410 and 4x411
Check us out on facebook.
Dual channel expander and gate with balanced ins and outs. Like new with original box and manual, used only a few times as a rental demo. The best gate ever made!
Compressor and noise gate pair mounted together in rack. Very good #8+ condition with many tiny minor scratches on ears and face.
Modified w/ ground lift switch. Excellent Cosmetic Condition!
Declinear Noise Reduction System. With AP power supply upgrades, totally cleaned, serviced, calibrated. Nice wood sideboards, excellent mechanical and cosmetic condition. This unit contains a valuable VCA module.
DBX I noise reduction. 4 channel professional noise reduction with 4 channels of direct inputs and 4 channels of direct outputs. 4 ch. encode out, 4 ch. decode in. Completely cleaned calibrated and tested in #9 condition. (Minor scratch top cover/rack rash)
Recording Technology Series, Rack Mount Heavy Duty Real Pro Construction. Simultaneous encode/decode, RCA ins/outs, level adjustment control for record, play (tape) and play (disc). Rack ears included -minor scratches at rack holes, low use unit, cleaned and fully serviced. +/- .5db calibration. #9 condition,
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Gain reduction, Compressor/ Expander. Tested OK. All switches and controls triple cleaned. Replaced regulator and upgraded main filter cap for regulation. Fully functional unit. Top cover has a fair amount of scratches. Faceplate mostly clean with some signs of use and light scratching. W/ AC adapter (120V AC 60hz 9w, 15v DC 300mA) #8- Condition
Later new version. Stereo type II tape noise reduction, With silver rack ears (with obvious wear) simultaneous encode/decode, older/space rack, front panel: Tape/Bypass/dbx Disc Selection, rear panel: preamp RCA STR I/O, Recorder RCA STR I/O, LUL ADJ, Trimmers: Tape Rec/Play, Disc Play. Cannot be converted to 220v. Like new cosmetic condition #9
4 channel DBX with rack ears. Cleaned, tested, minor cover scratches. 8+ condition
One space rack mount. Unit performs disc encode as well as tape encode/decode.
Encode/decode noise reduction, 4 stereo channels (8 total ins & 8 total outs). This unit works by reducing an incoming signal so that it remains well above the noise floor and then expanding the clean output signal at its original level. No box or manual. Good condition with scratches on top cover and minor rack wear.
Dolby B noise reduction unit. Correctly restored, carefully calibrated and tested. Very good #8+ condition with some very minor scratches on faceplate and slightly darkened back panel jacks. We can also service and supply parts for these units!
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
with rack ears, SN:430309. Converted FV to always on dbx #9+ condition
DBX Noise Reduction rack unit. 4 ch, 16 RCA phono jacks on rear, 4 each (input, output, encode out, encode in), selectable 4-channel NR. Unit cleaned throughout. Excellent condition, minor scratches.
TEAC Noise reduction, needs relays and work on circuit board which we do here.
Dbx 224 Later Version -Silver Trim with anodized black face No Rack Mount -120 VAC - All cleaned and calibrated. #9 condition
4 channel noise reduction, this version has no FV cable. Converted FV to dbx always on. With rack ears. #8 condition
Type I noise reduction. single rack height x1/2 width. 1 11/16" HTx 8 3/8"W. RACK PAIR. NO RACK EARS. Missing knob on butterfly joint. To/from console, to/from tape rec. Calibration levels A+B on front panel, rec/play in/out switches. Tested and working 9/10 condition.
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
Single rackspace. This is the best DBX noise reduction system on the market! +4dB, simultaneous encode/decode. 3 wire balance terminal strip on back panel. Used, in excellent #9 condition. Professionally cleaned, calibrated, and tested.
Dolby B. Outboard unit. RCA in/out. Encode or decode (not simultaneous) with level controls, test tone calibration, trim controls on front panel. Calibrated internally to +/- 1db tracking. 9/10 condition.
