8 track, 1 half inch record/play head. With mounting shell and platform. New stock.
Complete head block assembly with six heads. Heads have about 20% wear with an excellent wear in pattern. It is a good idea to replace all heads at once if some heads are worn out. Very good condition.
Record/Play head for Tascam 38, 48, 58, with base and connector. Virtually no wear on head, never lapped, but with some bronze oxidation at head perimeter only. Head top, gap, etc have been buffed clean. Very good condition.
Record/Play head for Tascam 38, 48, 58, with base and connector. Virtually no wear on head, never lapped, but with some bronze oxidation at head perimeter only. Head top, gap, etc have been buffed clean. Very good condition.
Complete with five main boards, all mounted in one case 15"x7.5"x3.4". Includes #5296005500 four meters with peak indicators, #51675301 four rec/repro amp cards, and #51675310 connector board with all connectors and cables. All in excellent condition.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
8track/8ch head. Relapped head, very good condition.
8track/8ch. Excellent condition, relapped head.
complete (1/2 track) assembly includes switch board, 4 head, (1/4 track playback head is worn out) but 2 track (1/2 track) play head is 85% good, as it was replaced at one time, 2 track (1/2 track ) record head is 70% good, and heads are in near perfect correct alignment
Record, Play Heads, Head stack, all 3 heads 80%+ good. Wear path is excellent with cut colored wires and complete top plate as original. Latest version best heads also used in a 3340sA A33440 8+
Part #53783004. Center. With allen screw, flat head screw, and one washer. 75% good.
Salvaged from low use machine. Excellent condition #9 , with AP touch up work on board solder joints for better reliability.
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs.
PB-14ZB channel card board for Otari MX5050 MkIII-8. Excellent condition, tested good. (1) available. New low price! (Part not found)
remote control box, functions: record, play, stop, rewind and fast forward, 12 pin, has nicely done Otari extended cable of 24 feet, looks original, condition #9
(Uses IC # AN6251) Connector attached with tac switches. Tests good. #9 Condition. This board is rare to supply, so we have a repair exchange situation, send in your Logic board and we will supply a working one for the $112. If you do not have the board for some reason, to purchase the board outright is $188.
Updated power supply with bypass caps. Tascam P.S. mod done. Good caps. Later version. Condition #9 At this time, we require that you send us your board in exchange for a $44 credit value, this will bring the cost of our updated board down to $144.
Control panel. Has all tape function buttons - stop, rec, FF, RW, etc. Tape counter. Complete with all buttons, pitch control, etc. Nice clean, but one minor small spot on face. Condition 8+
Excellent condition, used with very low use time, axle has light tape shadow. Teac WEC-4, operation PCB, 5210108700.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
52101769-00, 2 available, version with wire update (TASCAM) add-on. This is a normal Teac manufacture standard design of a board of this version. It's an early version board and slightly rare. Board works the same as later versions. Condition 8. $44 deduction from total price if customer sends in their board as a core unit (we will probably fix and resell later)
Part #: 52101740-01 #9 Condition.
52101770-00, 2 available, these have add on wire modes, condition 9. $44 deduction from total price if customer sends in their board as a core unit (we will probably fix and resell later)
bias PC board, #52101771-02, complete board, pulled from working unit, good #9 condition (Sold but possible others available)
Power supply and reel motor control board. Complete with mounting tray, screws, and DIN connector. Excellent condition.
Includes function/logic control part #5167525101, transport keys/boards #511700, and all connectors and mounting hardware. Easily slips right into unit. Excellent condition.
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Updated power supply with bypass caps. Slight variation exist and some updates can be done to improve board. But all PCB will replace and operate OK. #8