Updated power supply with bypass caps. Slight variation exist and some updates can be done to improve board. But all PCB will replace and operate OK. #8
Tape Deck Head, side by side for reverse/forward operation, #9 Condition
Updated power supply with bypass caps. Tascam P.S. mod done. Good caps. Later version. Condition #9
MX-5050 series unit. SN: 06276. With metal mounting plate. Like new, #9 condition.
#6050 2663, TP - N17DS. Fully cleaned, tested, pre-calibrated, and burned in, but customer will be required to tweak in calibration for specific machine. Relays have been cleaned. Buy with confidence. We like to support this product. 8 available. Condition: 8+
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
2 available, reel motor, 53700057-00, DC 24v 5w ccw, cw, known high use but test good, clean contacts, condition 8.
#PB 9A 482D Complete board. Audio Pre Amps, Rec/Play. With color coded jumper wires left intact was known. Tested good, but may need small repair or clean of switches. #9 condition
Motor servo and logic board #5210073802. Guaranteed tested working. The board has minor hairline crack at edge where no board foils are. Wire connector left intact, wire leads left as short indicator loads. #8+ condition
RWF-088B. Color code leads left on board. Mic in jack. Known tested quiet. #9 condition.
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
NM01 Micro motor. #9 Condition. (Vince personal part)
52101770-01 Known Good! #9 Condition. (Note: these boards do come in slight variations of color)
1 A 9. P4-500. 90% wear life left. Has original mounting bracket, springs, screws. Same as in GX-747. Low use. Salvage from working unit. 9/10 condition.
7 A 11. R4-242. 80% wear life left. Slight tape path wear. Has original mounting bracket, screws, springs. Salvage from working unit. 8/10 condition.
2 TRACK (1/4 Inch) Rec head for possible use with Pioneer, TEAC, and Technics. 16.5 ohm impedance #9+ condition, like new! Has Base plate for use of 2 screws very typical of japanese Reel to Reel heads
Supply side flutter roller. Bearing/Roller and cap. Excellent #9 condition.
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
4 track play head Three pieces available. For A3340, 3440S, and other similar models. Price is for individual head. New old stock
from Model 44. Excellent condition, head is repolished.
DBX PCB board 52101770-01, pulled from a good working unit, (1 for Vinc), Note: these boards do exist in slight various colors. condition #9
Function Play, rewind etc. complete board, relays etc. RWS-051, CMK-60Y, RNP-342, color wires attached. Low use, condition: 9
Ampex 4-Track 7 1/2 IPS stereo, reel and label good condition, cosmetically pristine, previously taped shut, tape shows virtually no run time, Good condition, Condition #9
For all models which use an 11 pin round connector. 12 foot cable; does reverse and all standard functions. Stop button is missing cosmetic "cap" but works fine. Remote has minor wear. Condition: 8+
We are a very different kind of shop. To help ensure a smoother experience please read our letter about our current shop policies.
play head, #IG07F, 1/2 track stereo, 1/4 inch tape, 80% good head, condition 8+ (can be lapped perfect if need be for additional $33)
(TP-547-T), complete board with wire harness, mounting plate, heat sink, and four mounting screws. Excellent condition.