Other models. 18 contact switch with silver cap and wire leads. Salvage. Condition #9
R4-242. Mounted to metal bracket with springs & screw hardware. #9 condition, tested good.
Black plastic frame (6" 2/16L x 13/16" W) excellent condition #9
(2) Available, Priced Each, Black, Locking, 1 unit has sleight staining at bottom Rim, Excellent Condition, Condition #9
(contact us for pricing) two cosmetic side aluminum "ears" (left and right) $28 the pair, Head frame with all parts intact, but heads are 70% worn. (2) Play heads can be re-lapped cost $90 ea, (1) erase head is OK $28, No record head - SOLD, Usable guide posts & head mounting hardware, each head mount tripod $20.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
4 buss fader for PMG. 100k ohm control, uses orange knob (not included). This fader has longer stem which make the knob sit high. (This 100k ohm control fits the same, wires up the same but will not match physical level position of original, just slightly different). suggest to buy as pair PGM faders. #10 new condition. (8) available priced each.
#52101735-02, Tested known to be good, Condition #9
Good Condition, (2) available, belongs to X300-R and Tascam 34 as well, Condition #9
TC-765, TC-755 Capstan Belt, (1) NEW approximate IC 20.25, Condition 10
5720103900, has calibration control illustration attached, minor scuffs - could be sanded/repainted, salvage from parts unit, condition #8+
($14) each, tops only, (10) Available can be used on RT-909, RT-1020, RT-1050 + others, Note:special order custom part, new replica part, condition #10
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
($24) set (1) Left + Right minor chips matched set, (1) RT Only - minor chips ($12) few dents/chips of vinyl veneer, pulled from service unit, condition #8
52101751-00 w/ meter mount bracket, salvage from low use unit, condition #8+
Cuts and trims 1/4" tape, storage in bottom for splicing tape, locking tape guides to hold tape, used good condition #9
Head DeMagnetizer, 2.25" barrel with 1.25" probe nd / probe, AC cord (supply 105-125 volts), original box - orange w/ b+w print, good condition #8+
Ampex 4-Track 7 1/2 IPS stereo, reel and label good condition, cosmetically pristine, previously taped shut, tape shows virtually no run time, Good condition, Condition #9
Contact us about similar items or replacement parts.
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
Contact us about similar items or replacement parts.
Shows some fading of aluminium trim with small nick on "S" and rectangle Logo, pulled from parts unit, Good condition as noted, could be painted/sanded to aluminium, #8- Condition
Contact us about similar items or replacement parts.
complete (1/2 track) assembly includes switch board, 4 head, (1/4 track playback head is worn out) but 2 track (1/2 track) play head is 85% good, as it was replaced at one time, 2 track (1/2 track ) record head is 70% good, and heads are in near perfect correct alignment
Control panel. Has all tape function buttons - stop, rec, FF, RW, etc. Tape counter. Complete with all buttons, pitch control, etc. Nice clean, but one minor small spot on face. Condition 8+
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Needs Cleaning (requires roller to be mounted on recorder and spun to clean the surface) Used Good condition, #8 Condition
Brushed Aluminum, Includes 1 Washer, Good condition, #9 Condition