Manual operation, no accessories included, unit is in excellent condition with vinyl cover, some surface scuffs but no major damage, does not include manual, cleaning solution, or brush, Condition #8+
Faux wood base. 4 speed auto cycle - 16/33/45/78 RPM. Pickering type cart that can adapt for a 33 and 78 stylus. Unit needs basic maintenance and does not have a stylus. (Dust cover is intact but has a tape mark.#7 condition, $24, Dust cover dimensions are 15 1/2"W x 13 1/4"D x 5 1/2"H) Motor, idler, and headshell all OK. Turntable is #9 condition. (price excludes the dust cover)
Wand/Tonearm "pipe." For Thorens TD110, 115 (and others). Includes: Cartridge mount hardware, alignment gauge, mirror. Like new - not used. Missing original outer carton. Condition 9+.
Complete, intact. No headshell or counterweight. With base and cue up assembly, wire. 8+/10 condition
Board# 6, 848, and 015. Complete board. 9+/10 condition. Guarunteed low use time, tested.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
Motor MC924, plastic housing, motor board M30336 and all full length wires/connectors still in place. Tested working. Condition #8+
Nice wooden base with clear plastic cover. Square front see thru smoked glass look (like amber) with clear plastic knob for sliding dust cover that gets removed to access playing records, somewhat odd design. Nice walnut veneer. 9/10 condition. (One or two minor scratches, otherwise perfect.) Unfortunately Dual had 8 possible base and dust cover combinations. The easiest thing to do is show us a picture. Sometimes you have to buy complete base and dust cover to make it work.
SM-100 Complete motor with spring and pitch adjust assembly. Original wire harness is intact; has C-clip style mounts; does NOT have original mounting hardware. Salvage from low use machine, serviced and oiled/tested. Condition: 9
Cable harness. Gold plated. Fits into bottom of arm assembly. #8+ condition.
3vDC motor with wires and pulley. Very good condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
with hinges. Very good #8 condition with some obvious but light scratches, could easily be buffed out with about an hour of labor.
with speed gear, pulley, mounting grommets, and color code leads. Very good #8+ condition.
with spline pulley and drive gear assembly. Excellent condition #9, tested and oiled.
If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
with board MDC960 and includes IC VC1031. Excellent #9 condition, tested.
with board and spindle. Excellent condition, tested.
with board and connectors, 12-pin Molex. Excellent #9 condition, tested.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
tested, low use, excellent condition, will not fit exact version that has 4 gold pins on the board.
For 1019, 1009 and possibly early 1219. Has original wiring harness and plastic connector housing. No pulley, Round black motor housing with three mounting bolts - 4mm shaft. Oiled, light use but good condition. #8+
Motor complete with pulley switch board, speedgear pulley, springs, no belt. Serviced , oiled tested. #9 condition.
Turntable motor. Matsushita MHN-3P2RDB. DC-3V w/ complete wiring harness. Good condition - pulled from unit with broken tone arm. Condition #9
Turntable motor. Matsushita FG Servo. MMX-4H2RPB. 12VDC w/ servo control board. wiring harness. mount hardware (screws + bushings). brass pulley. pulled from working unit. Condition #9
MC-102. 531124. Step transformer in shielded module 2ohm DC input. Probably 20-30ohm cartridge impedance. High impedance out 600ohm DC 20k ohm audio. 1 pin broken but only for mounting purpose on board. #8
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
with screws and adjustment spring, no pulley included. Working motor pulled from new but damaged turntable. Oiled, Tested.
Board #PNP-231-A PWM-061-C. Excellent condition, tested.