Isolated loop, direct drive machine with quartz lock IC logic tension. 2-track/4-track playback at 15/7.5/3.75 IPS. Takes 10" or 7" reels. Heads are excellent, all mechanisms excellent, #9+ super spec calibration. Excellent cosmetics #9 condition, very low use time overall. Calibrated for Maxell UD standard. Top flight machine.
Contact us about similar items or replacement parts.
4-track, two speed reel machine with 10" reels (no NAB hubs). Completely cleaned and serviced by AP, calibrated for Ampex/Maxell tape. Excellent condition heads #9, very good cosmetics with some minor wear on wooden side panels. Overall #8+condition
7" reel machine with built in preamp and speakers. Excellent condition. Contact us for details.
7 Inch Reel, 1/4 track stereo. Excellent. Mint condition. Calibrated to rec/play. Maxwell UD and Ampex 456. Output control at #6 is 0db reference. Low use. Condition: #9
Contact us about similar items or replacement parts.
Intact machine that needs proper service. Good pinch, fresh drive belt, all meters light up and respond. However, the motor is weak and there are missing channels. Has hub locks (screw type). Cosmetically good, recommended for a complete overhaul. Condition: 8+
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
1/4" 2 track deck. Mic/line/output controls. 1/4" mic L/R inputs on face. 1/4" phones jack. Dolby FM/ Dolby NR/ tape, source monitor/ rec bias/ rec EQ/ rec mode, switches, 2 V/U meters, hi/low speed, counter. Low hours use, fully serviced. Brushed aluminum face with wood trim. 9 condition.
Contact us about similar items or replacement parts.
1/4 inch, 1/4 track format deck
Contact us about similar items or replacement parts.
Working machine parted due to poor cosmetics. Head Cover (8+ condition) $48, 2 Reel Tables (8 condition) w/spring $48 each, Board 50484110/TP-N88-S $28, Board 50484103 $24, Board 50484090/TP-N88-S $24, Board 50484080 $24, Mic/Line/Output Controls $16, 2 L/R Mic 1/4 inch jacks $4, 1/4 inch phone jack $4, Function Board 51670623 SOLD, 2 V/U Meters 51650280 $20 each, Board 50484171 $16, Board 50484071 $14, Board 51673310 $36, Tension arm switches $18, Power/speed switch assembly $18, 2 Reel table black plastic rings $6, (2) reel motor caps 3.9 uf, 9uf $22, (3) control knob 1 chrome , 1 plastic #8 $14, pinch roller Cover & 2 washers #7 $16, counter belt $4, flywheel /capstan $30, play engage solenoid $8, sideboard hardware $14, screw kit from machine $14, cue lever $14.
2 track 1/4 record play. Has switch on top of head with internal speed switch - does 15, 7 1/3, 3 3/4 (internal switch reset motor speed). Has old side Otari press fit hub adapters. Heads are 75% good. Unit has been cleaned and calibrated; we re-soldered the power supply board and motor board; calibrated to semi-pro level for use with all kinds of tapes. All mechanics are good. Better side boards. Face cosmetics are nice. Overall, there is obvious wear all over, but this is a good performing machine. #8- condition
Contact us about similar items or replacement parts.
Excellent performance. Mic inputs, mixing. 7" reel. 3 3/4 & 7 ips. Nice compact RtoR. Serviced +85% heads + excellent heads calibration.
Contact us about similar items or replacement parts.
For Parts or Service. Auto Reverse. Excellent condition, but unserviced. Basic switch cleaning done. Needs belt. Great for hobbyist who wants an inexpensive reel to reel. Has one channel out (preamp in). 8+/10 condition.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
4 track simulsync 1/4 inch tape. Pitch control. Metal Reel, Pitch Control, Hub Adapters, All channels within 1db tracking. Complete clean calibrate (1 meter replaced) 8/10 Condition, heads are at 85%, no feet on back or bottom #8+ Condition
Honda MR-50L. (2) 28 ft M to F connector for remote console.
Dolby circuit version Reel Deck, L/R mic inputs, mic, line, output controls, high/low speed. Calibrated to Maxell UD or XL Bias 1 EQ 1. Excellent calibration, heads 85%. Cleaned interior/exterior of unit, cleaned/lubed all switches, jacks, pots, controls. Installed 2 new hub break pads. 8+/condition, excellent cosmetics.
Best quality. Auto reverse, forward play. Machine has #9 condition. Heads are 80% good with perfect wear path. Unit calibrated to N.A.B. standards. Record play levels match +/- 1db speed calibration. New counter belt , Recent new pinch roller. Light white speckles on top case. #8+ condition.
Contact us about similar items or replacement parts.
4 track 2 channel stereo, auto reverse, pitch control, monitor, rec mode, mic input, we may sell as-is or disassemble for parts, needs pinch rollers, machine has much wear, tape heads are worn but 80% good, motor good, needs new drive belt, #7 (unit dismantled- see our other listings for working reel to reel recorders)
1/4 track stereo format, 3 speed recorder 1 7/8, 3 3/4 & 7 ips. Reel tables have twist lock stems Super calibrated (for Maxell) machine on spec speed for 1 7/8 and 3 3/4, slightly 1% slow on 7ips. Excellent wow & flutter. All rubber good, all complete service & maintenance. #9 condition
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
4 channel Reel to Reel, output and Mic/Line level controls. 4 Nice analog VU meters. Super calibration for Maxell tape 0db is #8 and is pro 0db level out. Fully serviced and calibrated, Excellent condition. #9 condition, needs AC cord attached (no original AC cord now).
Contact us about similar items or replacement parts.
Relay board problematic, good reel table 8+(SOLD), head cover ($28), Heads #7 can be upped to #9($60), Sideboards #7+ (SOLD). Call for other parts ALL #8+ condition
PARTS - Failed machine, Heads good, pinch roller worn but clearly still in good condition, Machine appears to have bad capstan motor - Call - possible substitute motor available ($48), all cosmetics parts look good, (Head cover/door assembly - SOLD) Substitute motor $48, 2 erase Heads plus brackets $60 ea, All record heads and play heads SOLD, (See our listing #72894 is playback head for AKAI) 2 Pinch rollers worn but clearly still in good condition, needs basic cleaning $34 ea, Condition #8 Many other parts available, call directly 617-926-8020 we have belts, hubs, tables etc.
4 Track Recorder , looks intact / untested #8 condition
2 speed Reel Recorder, (7.5 & 3.75 ips.) 7.5" Reels, Walnut side panels, 1/4" mic inputs, 1/4" headphone jack, RCA In/outs, Output level control, Normal/Hi Bias, EQ, Tape/source switches. Take up reel adjusted for more even tape movement. Counter works excellently. Audio Pro cleaned & serviced, calibrated for Maxell Tape, High Bias 7.5 ips, Low bias 3 3/4 ips. Preplace VU Meters, WOW Excellent looking and performing machine #9+ condition.
Contact us about similar items or replacement parts.
Super quality Reel to Reel deck, 7" or 10" reels, pitch control blue FIP meters, Excellent record/ play quality ! New belt, New pinch rollers, Heads 80% good, with excellent wear paths. Audioproz cleaned and calibrated, bias set, board resoldering ruggedized at connectors. Output level#5 is 0 db reference, set Bias for Eq1 & Eq 2, Very good / excellent condition recorder, Faceplate #9- (maybe a littel scuff) 1 broken foot at back. Overall condition #8+
All Remotes are now 25% off or Free Shipping!!! (Reel to Reel remotes excluded).
Super Quality Machine, Use as Rental, Calibrated, Condition # 9 (original hard copy MIA)
(compact portable reel to reel) Mic 1, Mic 2 inputs, headphone jack, Volume, tone, record, master level controls, peak level meters. Up to 5" reels. Moves tape, FF RR, records heads are clean, rubber belts in good condition (1 belt replaced) low playback output ...probably power supply issue.