SS09BA 100143. With wire harness and switch. Excellent condition.
(10 available) $10 each. Automatic record drop spindle for Garrard or KLH 20. Most common version spindle. Excellent #9 condition.
for platter. Very good condition.
Pair of slot insert hinges used in many modern, inexpensive tables. 1 1/2" by 1 1/8" plate fits into cover, 1 1/4" fits into "T" slot on table base. All plastic construction, black color.
Tone arm counterweight, excellent condition.
Contact us about similar items or replacement parts.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
with 1 3/8" brass pulley on shaft. Possibly for a Philips turntable. Excellent condition, tested good.
6.25" diameter. For TD166 and other models. Includes axle bearing. Very good condition.
For all 1200 series tables. Drop spindle for stacking record. Excellent condition. Three pieces available.
Cycle cam gear, index finger arm (3" long), retract spring, and auto cycle arm.
Very unusual, "stealth like" look, black color. Excellent condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
4-pin power cord for Dual or Garrard tables. Two 120v AC in and one ground. Excellent condition.
with strobe bulb and parts. Bulb is 60% good.
Turntable motor with board assembly and wire leads. Marked SFDP03M01 U-994V-1. 7/10 condition, needs repair, possibly its motor.
Board #631022 and 12vdc motor #DMS-148F-66. New old stock.
Contact us about similar items or replacement parts.
Friction stopper for elevator arm lift shaft, auto cycle, arm return function.
Phono preamp with RIAA equalization. (This is a Mono Device) , Uses 8-pin socket connector. (1 only) Excellent #9 condition.
To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
Motor with pulley and mounting frame. Very good #8 condition. Three pieces available.
with wires, connectors, pulley, and shock grommets. Very good #8 condition, salvaged from low use machine.
Motor with wires, pulley, and shock grommets. Very good #8 condition, salvaged from low use machine.
with hinges. Very good #8 condition with some obvious but light scratches, could easily be buffed out with about an hour of labor.
For various manufacturers and models. Includes board #N-83 and wire leads. Excellent condition.
Excellent condition, salvaged from low use machine.
If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Excellent condition.
Contact us about similar items or replacement parts.
with MSM4011 IC installed. Tested good. (Also listed in some Technics manuals as SL 1300 / SL-1400 MK2 arm pulse board.)