Red gear, 3.5" diameter. Very good #8 condition. Three pieces available.
Main Original belt. Orange color. Like new condition. (Pulled from a working turntable)
For Bic model 940, 960, or 980. Like new condition.
Half moon front, black color. About 1 and 5/8 inches in length. B111940 marked on bottom. Excellent #9 condition.
3.5 gram counterweight for Technics turntable. Half inch wide hole for shaft. Excellent #9 condition with one minor scratch near 0 mark.
Contact us about similar items or replacement parts.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
#SFGC 122-04E. Original part, new stock. two available. Price is each.
Has obvious chip size of a quarter #9 condition except for quarter-sized chip in front right corner. Originally from Thorens model 166 MkII.
Model unknown, Dust cover has cracked front corner - #5 Condition - (SOLD) Pair of hinges and springs are $16 Hinges supplied with screws and chrome backing plate. Plate measures 1 and 11/16 " wide by 9/16" This plate and hinge screw into cover. Base of hinge fits in slot of turntable base that is 1" wide. #7 condition
11.5" (diameter) turntable mat for Dual 1219 or 1229. Very good #9 condition with one obvious scratch on inner ring.
Contact us about similar items or replacement parts.
Large (11" diameter) turntable mat for Dual 1245 or similar. Excellent #9 condition.
11.5 inches in diameter. Very good #8+ condition.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
4 pin Molex to standard USA two blade AC plug.
Contact us about similar items or replacement parts.
# 20-47-1001 (24 pole), 300rpm synchronous. Tested, Excellent #9 condition.
300 rpm, 115 volts, 60 Hz, 1.5 watts. With color code leads attached. Excellent #9 condition.
A note on AR turntables:
We have had many customers write in asking about original version XA AR turntables. We rarely have any complete ARs, because we usually break them for parts - they are worth more in pieces than as complete units. Be aware this design has a number of faults that prevents these from being true audiophile turntables. The original arm cannot track a good quality cartridge (too much friction) and the arm is also too heavy, so that only a basic 2.5 to 3 gram tracking force low compliance design stylus can be effectively used. A modified AR with a new arm, dampened chassis and other mods can be nicer than some more expensive units, but there are plenty of better vintage Japanese turntables that can be had for around $200, that will simply work better with modern quality cartridges. I mainly deal with well-done technology that stays calibrated and is reliable and easy to fix, and most of my customers want a turntable that has auto-return, pitch controls, hinged dust covers, etc. AR were amazing for their brilliant suspension design, but the archaic arm design and motor rumble noise holds these units back unless they've been modified. I am happy to continue to supply parts for these turntables, and if requested I can explain how to modify the arm and suspension to be usable with a better cartridge.
Later version AR ES-1 turntables are superior turntables and the arm is excellent and not to be changed out! Only a correct cartridge type should be installed.
- Vince
Contact us about similar items or replacement parts.
Idler #28, 40mm total diameter, about 1" inner metal diameter, 7mm outer rubber diameter. Excellent condition, many available.
MMN-5B2R motor with original magnetic pulley. MFG# SFM4BD2N01E New in box. We now have additional motors that can be used as a substitute to this rare motor. Please contact us for addition information.
Contact us about similar items or replacement parts.
With head and internal wiring intact. No headshell, weight, or cartridge holder included, arm only. Excellent #9 condition. (chrushed headshell not available to sell)
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs.
Complete arm stand for Bic 900 turntables, with mounting nut and washer. Excellent #9 condition.
Two holes to mount screws, 1.25" pin length. Two pieces available. Very good #8 condition.
We have various automatic record drop spindles available here. Please show us a picture of the spindle you need. We have BSR, Bic, Garrard, Elac, KLH, Dual, etc. $10 to $20 each. *This part has become scarce in working condition; most spindles are missing little rubber record hole grippers. I have plenty of spindles but somehow small little rubber squares must be glued into "umbrella" stem to allow drop functions. Info online does not exist about this fix done by hobbyist but if doing it here, spindles would cost $48 due to fussy labor required to fix, test etc.
Parts machine. Parts can be sold separately. Good #8 dust cover, SOLD ; excellent #9 base, $24; excellent #9 platter, $20. More parts available -( No Belt or stylus) - Call for additional parts.
20"x13.875"x4.25" (slightly larger dust cover). Design with slide in hinges. Clear plastic slightly sun darkened. Very good #8 condition, top cover slightly warped.
We have new stock turntable belts for Philips 212, 312, and many other turntable models!
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
We have new original orange BIC stock turntable belts. For BIC models 940, 960, 980 turntables! ($16/ea.) 1 Available
Counterweight for Philips 212 or Philips 312 turntable. Very good #8 condition with some minor scratches. Two pieces available.