black with brass shaft , silver top, minor wear. Two available. Condition: #8 These levers are in (oddly) high demand at the moment; maybe this is because in 1219s, the grease has a tendency to freeze up in the speed mechanism, causing people to force the lever and often the "elevator" finger into the step up speed selector (which can also break). The elevator finger is a gray metal piece with a half inch "finger" sticking out. The price for that part is $16. Inquire for more details. (Send us a picture of your leaver, so we can be sure to supply the correct part, 3 variations of leavers exist and these are now selling for $22 to $34, it's the demanded Dual part.)
Motor board with AN6683 and AN6638 - SOLD. 33, 45 switchboard- $14, Transformer, arm stand lights - Call, AN6683 Motor drive IC only NEW $16, Spindle/gear/collar for SL-QD35- $14, Bottom Panel (at Vinc home)- $16
12VDC motor. With brass pulley bracket and small board. Low use. Condition #9.
Contact us about similar items or replacement parts.
#9 will probably fit MB-10 Substitute Counterweight, Heavier than original weight but has correct shaft diameter. Probably work OK with heavy cartridges.
Contact us about similar items or replacement parts.
12 VDC Motor, Excellent Condition.
Contact us about similar items or replacement parts.
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
Main board for IC's. Auto-off / PU is problematic: no sense for arm auto end of record, up and return. All other functions ok, motor speed ok, display ok - (CALL); Platter mat. Used, still supple - ($42); Armstand - ($20); Grato MG body cartridge - (CALL); Feet, 4 set - ($54); Platter, used small. Corrosion on rim - (CALL); Motor board - (CALL); Tone arm - ($68); **No counterweight **No dustcover **No headshell **No Stylus. Call for other parts. Overall condition 8
motor $34, good platter $14, good matt $14, dust cover in good condition, several scratches with hinges (sold), entire unit #8 condition
Contact us about similar items or replacement parts.
fully automatic turntable, good for parts, dust cover has heavy wear w/no cracks-#6 condition, good for arm, motor, platter, base, motor $22, platter $14, condition of unit 8+
Headshell $16, Counter weight $18, Platter mat $14, all items Condition #9,
1 Drive motor board, with motor but motor itself has shorted coil, some work on drive circuit repaired (board works, parts value) - $28 (motor located in T-110) , 1 Transformer, model# 4002022 - $16, 1 Main power & control board with pitch controls and AC switch, S-0015 CMK-77X - Call to break specific parts, 1 Light bezel, All condition #9
To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
We can fix BIC servo motor systems. The specialized IC and other parts are available in our stock. We also offer a modification to correct intermittent cartridge mounts and adjustments to ensure auto cycling of the arm return. Drop spindles may be available as well, though they are scarce.
with stem 1/2" square fit hinges on cover. Very minor scratches at top bubble. #9- condition
Contact us about similar items or replacement parts.
(1) Motor #MHN-3P2RDS DC3V SOLD. (1) Circuit Board with 1003C2 special motor IC $28. (1) Original belt, perfect $12. Low use, salvaged, tested, #9 condition.
Low use turntable, being sold for parts. Has the typical sliding drawer problem and locked functions(logic controls) , and possibly a bad motor. Call to inquire about individual parts. Platter mat (#9 condition): $22; Counterweight (#9): $18; Top cover with glass (#8+): $22; Metal platter (#7, slight corrosion): $12; Headshell: SOLD- call as others are available.
Motor MMN-602RESA. With hardware and brass pulley. #9 very good condition, tested and working.
Contact us about similar items or replacement parts.
Only these following Parts listed are available: 1- Platter #8 Condition $18.00, 1- Motor good (16,33.45,78 speed) #9 Condition $28.00, 1- Idler #9 condition $22.00, 1- Counter weight $18.00, 1 Head stock- $28.00, 1- NordMende base,Teak with silver trim #9 condition $20.00, 1- Arm stand $14.00.
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here).
Vintage wood base design with clear dust cover. Automatic operation. Unit does have cycling mechanism problem. original platter mat & counterweight. angled bayonet mount head shell. (SOLD) Needs belt, suspension is bottomed (can be re-tensioned) #9/10 Condition. Prefer to sell as complete unit but may sell parts.
$48-$68. Use the Contact us for current availability. (To inquire about a motor please show us a picture and/or find model number on your motor.
Assorted motors for Dual turntable models: 1009, 1209, 1219, 1229, 1019, 506, 505. If you have a bad motor, send us a JPG to sales@audioproz.com to confirm correct fit. All motors in perfect condition, low use time.
If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley. $20-$40.
Circuit boards, motors, bulbs are special order. 1 LDR , various boards available, we have many Philips T.T. parts available, call 617-926-8020 or email for details.
Will also fit 1209, 1215, 1219 1229 and 1249 Chrome plated - #9 Condition
Contact us about similar items or replacement parts.
Parts available: Dust cover in #8 condition -$15. Cartridge and stylus in excellent condition -$15. Excellent condition knobs kit -$12. Motor -$22. Most other parts and boards are also available; please contact us!
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Pulley for turntable motor 60hz, fits 4mm axel, 3 speed. #9 condition
Contact us about similar items or replacement parts.
Shock mounted brushed aluminum counterweight in black plastic housing, with stem. Has original set screw-brushed aluminum. Salvage from low use machine; some light scuffs on end. Condition: 9
Contact us about similar items or replacement parts.