Better quality phono, tone control slider a little sticky, but works, special enhancement EQ control. #7, missing front bezel. 7 inputs.
Contact us about similar items or replacement parts.
Hi-Fi Stereo Pre. 2 phono in (1=100 ohm, 2=MC), 2 tape loops, 1 aux in, 1 tuner in, 1 processor loop, 2 direct out. Tone defeat and mono. Dark grey with large knobs and selectors. 1/4 inch headphone out. 8+/10 condition. Some minor paint wear. Has original box and packing. Complete service/cleaning/calibration and dialectric lube.
Contact us about similar items or replacement parts.
Rack faceplate with chrome handles. Rack face has minor scratch at rack holes. SN:08950 All level II mods done. 9/10 condition.
Contact us about similar items or replacement parts.
Holman Pre-Amplifier. Black rack mounts. Paint is peeling at rack holes. Black handles. Infrasonic filter. Level II mods. 8+/10 condition (has minor dent at bottom center panel edge).
Contact us about similar items or replacement parts.
Very high quality discrete circuit preamp. Audiophile build quality. All connectors, RCA panels clean and tight. All capacitors checked, are in good quality. Unit has had pro cleaning, silicon dialectic installed in switches. 8+/10 condition, minor scratches on top edge but unit has seen extremely low use time.
Contact us about similar items or replacement parts.
Need an APT unit serviced or modified? Vince, the owner of Audio Pro, ran the production line at APT for many years, and has decades of experience working with APT products. Read all about our APT Holman service and mods here. Also read about the APT Moving Coil Phono Mod Here.
Basic as new demo high quality phono preamp. 9/10 condition.
Super clean and low use condition. Original high quality tubes, Nationals made in China. These are super low noise version tubes REV 2.05. Low use time was used in personal studio, not roaded. 9/10 condition, very minor rack rash at holes, recent battery cleaned and calibrated.
Contact us about similar items or replacement parts.
USB dual Pre. 2 channel. Computer interface. Project series. 10 condition. New.
Stereophonic Preamplifier. SN: AK2903. Aux, Tuner, Phono 1 & 2, Mic, and Tape HD Inputs. R/L Controls for both Bass and treble, headphones, and tape in/out jacks. This unit is fully serviced and tested. One capacitor added to improve power supply. Cleaned all controls, switches, jacks, tightened connectors, checked phono noise, and a 2nd switch cleaning. Includes all original packaging, owner's manuals, factory harmonic distortion test graph, cabinet available also. #9 condition
Contact us about similar items or replacement parts.
Soft black matte finish rack faceplate. Chrome handles. Unit also has all Burr Brown. SN# 6254. OPA 2134. Replaced in all line level circuits. Results in a 2db noise floor improvement but really the unit has a 93db to 96db noise with standard A.P. mod. Some light fingernail scratches on face. Unit 3 position high frequency EQ switch, middle position is an analogue EQ for CD. An extremely subtle audio improvement was noticed, but only under the the most critical and best headphone use. #8+ condition
Contact us about similar items or replacement parts.
Set for 100Ω impedance but this version can be reset to as low as 20Ω, low noise spec, no capacitor update but unit performs perfect, low use, QC check, #9
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
Pre amplifier, superior design, gunmetal gray, rack mount with rack handles, excellent phono stage, MM + moving coil class A fet design, eq circuit with turnovers (3), (bass 50/120/250 treble 3K/6K/12K), external processor (EPL loop), cosmetics excellent, low use, all control switches cleaned, #9
Contact us about similar items or replacement parts.
Mc pre-amp board. Complete. Good condition. Tested and working. Has original caps. #9
Set for 100 ohm impedance, but can be changed per customer request. (15db gain modified). All caps updated / recapped, noise check, EQ check.OK #9 condition
phono preamplifier, variable preamp gain, RCA outputs, new in box, OUR RECOMMENDED PHONO PREAMPLIFIER! #10 condition
AM/FM Preamp (Preamp with built in Tuner). NO REMOTE. 6 db gain change at output circuit. Low noise for headphone out. Used excellent condition, modified unit for better nicer range on volume control. #9 condition
Contact us about similar items or replacement parts.
nice, basic preamp, EQ, updated with TL075 op amp for tone controls (lower distortion, noise), did 250pf and 18k resistors on all input jacks for RFI protection, did 50pf RFI protection on phono input, revised more correct grounding for phono input, updated power supply capacitors and improved grounding, nice face, not original bass controls, # 8 + condition
Contact us about similar items or replacement parts.
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs.
Stereo Control Amplifier (preamp), black face, very simple layout, bass/treble, tone on/off, tuner/cd aux/tape 1/tape 2 inputs, tuner/cd/aux/tape 1/tape 2 REC out selectors, excellent condition, very clean, easy to use, 2 hairline scratches right hand corner
Contact us about similar items or replacement parts.
Autocorrelation preamplifier. Unit has seen extremely low use time. All controls switches board connectors cleaned corrected power supply per Phase Linear update, some IC sockets and best noise version op amp installed. Repaireds some RCA inputs and fortified them with glue. Replaced various capacitors anywhere in unit which measured off spec (about 20 caps changed). Install "star ground" modification to reduce noise and RFI ruggedize all board connectors auto corrector circuit. Spec of unit noise floor and channel matching is excellent! Tracks excellent +/-1db channel match!
Contact us about similar items or replacement parts.
Control Amp. (2) Phono in with selectable MC/MM, 3 position cartridge loading switch, and 3 position gain selector. Tuner, CD, Aux 1 and 2 inputs. (2) Tape loops, and (2) set main RCA outputs. (Has some DIN connectors for Tape, CD, Tuner). Complete cleaning and serviced by AP. No remote, Missing (2) function selector gap covers. #8 condition. Missing (2) Function selector gap covers for CD and Tuner
Stereo Control Amplifier. High accuracy EQ. GMN Stage volume and level control for a very high gain low noise FET gain, low noise FET Design. Audiophile phono pre MC and MM. Cleaning, glue removal, and board resoldering done. Low use #8+ condition SUPER LOW NOISE!, Condition #8+
Contact us about similar items or replacement parts.
Stereo Preamp. Tuner, Phono, CD, Aux 1, Aux 2, and Video inputs. Loudness, and low level switch. Bass and treble EQ controls. Infrasonic filter switch. #8+ condition - Minor scratches and wear on face and top cover.
Contact us about similar items or replacement parts.
Basic phono to line level w/ RIAA equalization, RCA / 1/4" TRS output (line level), 12v DC power supply included, Small and compact (4"x2.75"x1.25"h), Original box and manual, Used in Excellent condition #9
Need an APT unit serviced or modified? Vince, the owner of Audio Pro, ran the production line at APT for many years, and has decades of experience working with APT products. Read all about our APT Holman service and mods here. Also read about the APT Moving Coil Phono Mod Here.
Pebble Black Finish, various available. One (1) in #9 Condition- $68. Six (6) more available in various conditions, all good with no major damage, approximate #8+ condition -$46.
Receiver converted into PREAMP. Black faceplate. Phono, CD, Video 1, Video 2, Tape 1, and Tape 2 inputs. 10 tuner presets. Built on (non-original) volume knob, with cut hole for LED indicator. #7 condition