#9 condition.
(1) BF A2L36 Motor w/ Pulley, #8 Condition -(SOLD), (1) Par Tape Hubs with Springs and Little Washers - $14, (1) Function Motor VA700BOY with Switches, Gears - $40, Pinch Roller #8 Condition - $12 Unit has seen 20% of it wear life on all parts
Plastic pulley with small PCB for connections, colored leads included. Low use. #9 (2 available)
Aluminum w/set screw. Pulled from a working unit, good #9 condition.
Transport assembly, with counter mechanism, with motor #CL86M20A. Needs new belts. Meters and door are included. #9 condition
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
(1) Double Cassette, Face Knobs & doors, Top Cover intact but loose. Motors MMI-6H2LWCI, unit has one damaged transport, loose pinch rollers (one good) low use, both motors good, needs belts. #7 condition.
Double Cassette, One transport has broken head turn gear, both transports in low use, #9 condition but have had belts motor MMA 6B2LWFC. Buy decks, Buy motor. #7 condition.
(1) Mode motor for function cycle ($34), (1) Main motor 53700037(SOLD), (1) Rec play head 53786008 #9 condition (wear path just visible) ($38). Pinchrollers (call) , Preamp PCB 52101206-01 ($22), Index CAM finger (white plastic) ($30), 10k control ($8), Oscillators 52922-026 ($8), Back panel PCB 52101194-00 (call) . #9
Knobs ($4 each) transport gears wheels, hubs (call). Micro switches ($6). Magnet sensors ($6), Meters ($6), power supply PCB #52101198-01 ($22), Logic board #52101197-01*($22) power switch complete ($8), control switches (call), Front function button($14), Display, numeric ($22). #9
Double Cassette with Motor, MMA-6B2LWFC. Unit in low use condition, appears to have head rotate gear problem. #8+ condition.
Capstan Belt, Original (OEM) belts - critical for WOW + flutter spec. Used in following units: 480 series, 580 series, 660, 670, 680, LX3, LX5, RX 303, RX 505, ZX - 7, 700ZXE , 700ZXL, 1000 ZXL. New stock #10.
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs.
Vintage cassette deck,, Single large VU meter. CrO2/Reg(normal) tape switch. Dolby B noise Red No/Off (first Cassette Deck to use!) and Stereo/mono switch. Note: Missing Pinch rollers +arm (sold) unit can be used for many parts or restored. Nice plexi cover, has chip under right corner. Used, #9 good condition.
Black, Vinyl leather, Some wear around edges, Used - good condition, Virtually new, Condition #9
Contact us about similar items or replacement parts.
12V Counter Clockwise, manufactured by Sanko. Salvaged from used machine, tested oiled low use. #9
VU meters, #Raw-0340 (75-11A). 1.75"W x 1.75"W(overall) (window 1 5/8" x 1"Ht). Good condition, all lettering intact, no "yellowing" of lens. Used Salvaged. #9 condition. (2) available priced each.
Comes with Nylon Pulley. ( Same as EG-530 KD-2B M-09Z12U36C-6 Same as MMI 6H2LWK ) Used very good condition and tested . #9 condition
With Mt. Screws, Wire harness + micro switch. Note: Motor has worn gear (12/16" long). #9 condition.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
Motor has "V" groove pulley for square belt. No hardware to mount motor. used, good condition tested low use #9
Motors have "V" grooves pulley. Very good condition. 1 motor has mounting hardware.#8
With "V" groove pulley , wiring hinges + plug and 2 micro switches. Tested low used #9 condition.
Cassette Motor clockwise. Tested and working, salvaged from working unit. #8
complete with wires and C1568-8/ regulator mounted on exterior. Salvaged from a used Hitachi D-220 which had seen some use, but motor works, seems to be good. #7
Contact us about similar items or replacement parts.
3 position bias/EQ switch (normal/Cr0z/metal), Mic inputs (L+R). Nice large VU meters (analog) easy to read. Used, #8 good condition. Many parts available, unit all intact, needs some service.
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
hall effect sensor 5732252020, 3 available, $6ea