48 point balanced normal/ half normal & through mode selectable!!! single space rack #10 condition new in box
Takes MIDI signal and strips sync signal onto tape, then reads back to MIDI to allow sequencer use. Mint condition, with manual and power supply.
High impedance phone in split to high Z phone out at box and split to transformer balanced XLRm low Z out, probably to mic pre. Good for keyboard or monitor mix situations. High quality Switchcraft connectors.
Optical Data Link with AC Adaptors, Optical to Coax and Coax to Optical Simultaneous. New in Case.
Check us out on facebook.
Male XLR connectors (pin 3 hot, specifically for Otari 5050 Mk8) to 1/4" phone, 8 channel snake, 15' length, excellent condition.
XLR (F) to RCA. 20 feet. Pin 2 HOT. High quality cable, Switchcraft connectors. New. 10 condition.
20 FT snake, high quality Switchcraft connectors, could be rewired for other connectors, cable is balance line wire but used as basic one conductor #9 condition, 2 available
12' long, acculink AC/8 cable, 8 balanced lines. High quality 1/4" connectors (GH with heavy duty strain relief) with clearly labeled jackets. For use with Tascam, Mackie, Digidesign/Protools, and other multi-track systems. Light studio use, #9 condition.
5 input tape routing selector, play, record, copy, condition #9
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
1/4" phone connector ends stamped with channel numbers, bound in gray snake jacket. High quality Switchcraft connectors. Like new condition! Two pieces available.
8-channel XLR(f) to 1/4" phone snake, 15ft length, high quality connectors, excellent condition. (pin 3 hot used with otari 5050 MK 8 machines)
15FT, XLR pin 3 hot, high quality Switchcraft connectors with channel numbers stamped on connectors for Otari MX 5050 MKIII 8 TRACK
15FT, XLR pin 3 hot, high quality Switchcraft connectors with channel numbers stamped on connectors for Otari MX 5050 MKIII 8 TRACK to RCA in #9+ NEW
Front panel 40 1/4" phone, rear panel: 20 1/4" Phone, 20 - RCA jacks. Rack mount - single spare. #9, Like new
15 feet. Male XLR to male RCA. All high quality Switchcraft jacks, Conquest type. Excellent #9 condition.
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
1x3 low impedance mic splitter. Shielded transformer, XLR in, two mic outs and one direct XLR out.
Female XLR to 1/4" male phone, quality shielded cable and Switchcraft nickle plated connectors, tie wrap bundled snake. Very good condition.
24 phone plugs nicely installed on one end, harnessed and spaced for mixer console or patch bay. Switchcraft connectors.
Not manufactured by ADC, but industrial made with ADC connectors. One space rack mount, 48 points, TRS balanced normalled bottom row. Unit has seen heavy use, but this is a rugged design and all connectors have been cleaned and tested. Connections hard wired on back panel, but can be removed if desired.
10ft length. Has 4 TRS 1/4" to 8 phone, plus one phone to phone. All high quality Switchcraft connectors. Excellent condition.
19" rackmount version. 4 MIDI in to 8 MIDI out. A single MIDI input signal can be sent to all eight outs, or up to four MIDI ins sent to any eight outs. With power supply. Very good #8 condition with very minor wear.
All Remotes are now 25% off or Free Shipping!!! (Reel to Reel remotes excluded).
8 XLR Male Z fan;8 XLR Female box; 45' cable. Nice build quality. Has some scuffs on box and male XLR shell, bent ends on box, and broken release pin #3. Condition: 8
2 RCA to XLR male stereo with pad. Transformer isolation very high quality. New. $68 each.