MMI-6A5HKSA. DC 15V. With brass "dual type" pulley. 2 wire leads, red and blue 6". Used - pulled from salvage unit. Condition #9.
MMU-5B2LWAI. DC 12V. No pulley - shaft length = 0.375" = 9.5mm. 2 available. Used good condition. #9 condition.
FF/RR motors for Sony WR series. Excellent condition. 3 Motors available - (1 labeled ZB3 226, 1 labeled ZB3 066, 1 labeled ZB5 227, All have nylon pulley at base of shaft 1 motor has the planetary arms and spring) All motors have 3 wire plug in cable attached Used Excellent condition #9
w/ motor board. 3 wire motor. Condition #9.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
12 VDC motor CCW. With brass pulley. Tests good. Condition 9.
Motor with brass pulley. 12V CW. Tested good. Condition 9.
(4) available, priced individually. DC 12V motor. With printed circuit film type connector. With nylon pulleys. Condition #9.
EG-530KD-2B with removable pulley. Low use, test good and Guaranteed. Low Use 60 day Warranty. No Picture will be provided. We can supply an equivalent substitute of this motor only at this time MMI-6H2LWK see our listing 70522 , used in semi pro 4 track cassettes and other machines. 9/10 condition 2 Available.
Left side transport. Needs belt but mechanics perfect. Motor: Sankyo BFB2L74
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
(2) Available. DC-12V; CCW has original mounting bracket; has original brass pulley; wiring harness intact; salvaged, low use, oiled and tested 9/10 condition
FG servo motor, 1 1/2" diameter, 1 1/2" height, w/brass pulley and Tacho sensor PCB board (#1-586-600-12), used - pulled from working unit, condition #9 (MIS, paperwork still alive) substitutes can be made upon request (show picture)
With removable pulley. Leads are 1 inch cut. Salvage from a low use machine, tested and fully functioning, in excellent #9 condition.
(1) Motor MM1-6A2LKWJ DC-12V with brass pulley. Oiled and tested, see inventory #48728 #55937 #55936 for equivalent motors of same number, second motor not found in draw (6-24-22). condition #9.
Key down deck design, whole machine being sold for parts. Cassette in #8+ condition cosmetically, mechanics #9. Unit needs belts and cleaning. Pinch roller OK. Unit has been in storage for many years. Belts are easy to replace, so this could be a great hobby project, but we can also break this unit for individual parts. Most of the value is in the motor, heads, meters, and bulbs.
(2) available. capstan motor, Matsushita #MMI-6H2LWK, DC 12v, w/working nylon pulley, small foil plug-in (ribbon) connector, used, condition #9
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
71051061, 70119-E. With removable metal pulley. Same model as: 4-527T, 09300B, 80221-B, 5572332, 70203-C, 12V. #9
Motor # 71238 and 41301971 number listed. CCW, Brass Pulley, 4 pin. Tested, oiled, good torque, #8+ Condition.
DC-12V CCW; Has original mounting bracket; has original brass pulley; wiring harness intact; salvaged, low use, oiled and tested 9/10 condition
9VDC Motor with brass pulley. Nice, working condition, salvaged from a working unit, Low use. #9 condition.
Motor # 71051350 for play, rewind etc. Low use part, #9 condition.
motor XMI-6B2HW, CCW motor, 2 available, w/white removable pulley, tested, low use, condition #9
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business. We strive to offer good products at competitive prices. While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run. We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Audio 400 Vintage head demagnetizer. New Old Stock with original box and operation manual.
Motor, RXM-076. With removable plastic pulley. Low use time, tested & lubricated, #9