Deck A Transport with motor #CMBL8Z221B with cover. Value is for belts and motor, belts are good. Heads %70 good, pinch roller good. 8/10 condition.
(1) MOTORS, CCW, 4 Wire connection to board. 9/10 condition, known low use tested. See 48546 / 51584.
Board #5210013900 TP-N88-S. Switches and all parts tested and working in excellent #9 condition.
With heads (part #55696061) and small parts. Excellent #9 condition. We also have transport parts available, call for details.
Main motor: MMI-6H2LWK with cycling motor. Tape transport, left side. Bad Belt #8 condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Tape transport, right side. Low use. Bad belt. Unit has motor MMI6H2LWK and cycle-gear motor. Low use mech. 9 condition.
with dual belt nylon pulley. CCW. Excellent condition. #9 condition. See 48546 / 60116.
(4) available, priced individually. DC 12V Motor. Includes removable plastic pulley. Usable in Tascam PortaStudio cassette decks. Condition 9
W/ Brass Pulley - 2 Tier. 3 Screws/Motor Mounts. 2 Lead Wiring (Red + Blue). Good Condition - Oiled and Tested #9
All Remotes are now 25% off or Free Shipping!!! (Reel to Reel remotes excluded).
12 VDC. 1600/3200 RPM. CCW. 2 Available. Oiled. Good Condition #9
12 VDC CW or CCW operation, (same part as MMI-6H2LWPK for use in TASCAM PORTA STUDIO recorders) from low use salvage machine, (2) available, Tested OK. #9 condition
Motor with pulley. Part Number: 70001200. Test, Low Use. #9 Condition.
Includes metal housing & worm gear. This may work for Nakamichi. Oiled and tested. Condition 9
DC 12V motor with pulley on axel (standard size for many designs - possible use for turntables). Oiled and tested. Condition 9
pinch roller and pinch arm assembly for DAT machine. Used only in stock. Nice condition . Be aware of Panasonic 3700 3800 problem where tape slips out of pinch roller when rewind scan of tape is engaged. It is usually due to spring tension of the pinch roller is weak. The spring is located at the bottom arm end and is difficult to install.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
complete tape transport only (deck A), includes cassette well cover, 2 motor transport, auto reverse, used - pulled from working unit, condition #9
2523702-51119B. CCW, Plastic pulley, 4 pin. Tested, oiled, good torque, #8 condition.
(3) Available. Tested, oiled, good torque. Condition #8
12v motor with original circuit board and color code leads attached. Perfect condition new old stock.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Motor with original circuit board, pulley and color code leads attached. All original stock.
12v motor marked 10918-C. New old stock.