8 track, 1 half inch record/play head. With mounting shell and platform. New stock.
Complete head block assembly with six heads. Heads have about 20% wear with an excellent wear in pattern. It is a good idea to replace all heads at once if some heads are worn out. Very good condition.
Record/Play head for Tascam 38, 48, 58, with base and connector. Virtually no wear on head, never lapped, but with some bronze oxidation at head perimeter only. Head top, gap, etc have been buffed clean. Very good condition.
Record/Play head for Tascam 38, 48, 58, with base and connector. Virtually no wear on head, never lapped, but with some bronze oxidation at head perimeter only. Head top, gap, etc have been buffed clean. Very good condition.
Complete with five main boards, all mounted in one case 15"x7.5"x3.4". Includes #5296005500 four meters with peak indicators, #51675301 four rec/repro amp cards, and #51675310 connector board with all connectors and cables. All in excellent condition.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
8track/8ch head. Relapped head, very good condition.
8track/8ch. Excellent condition, relapped head.
complete (1/2 track) assembly includes switch board, 4 head, (1/4 track playback head is worn out) but 2 track (1/2 track) play head is 85% good, as it was replaced at one time, 2 track (1/2 track ) record head is 70% good, and heads are in near perfect correct alignment
Record, Play Heads, Head stack, all 3 heads 80%+ good. Wear path is excellent with cut colored wires and complete top plate as original. Latest version best heads also used in a 3340sA A33440 8+
Part #53783004. Center. With allen screw, flat head screw, and one washer. 75% good.
Salvaged from low use machine. Excellent condition #9 , with AP touch up work on board solder joints for better reliability.
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business. We strive to offer good products at competitive prices. While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run. We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
PB-14ZB channel card board for Otari MX5050 MkIII-8. Excellent condition, tested good. (1) available. New low price! (Part not found)
remote control box, functions: record, play, stop, rewind and fast forward, 12 pin, has nicely done Otari extended cable of 24 feet, looks original, condition #9
(Uses IC # AN6251) Connector attached with tac switches. Tests good. #9 Condition. This board is rare to supply, so we have a repair exchange situation, send in your Logic board and we will supply a working one for the $112. If you do not have the board for some reason, to purchase the board outright is $188.
Updated power supply with bypass caps. Tascam P.S. mod done. Good caps. Later version. Condition #9 At this time, we require that you send us your board in exchange for a $44 credit value, this will bring the cost of our updated board down to $144.
Control panel. Has all tape function buttons - stop, rec, FF, RW, etc. Tape counter. Complete with all buttons, pitch control, etc. Nice clean, but one minor small spot on face. Condition 8+
Excellent condition, used with very low use time, axle has light tape shadow. Teac WEC-4, operation PCB, 5210108700.
We are a very different kind of shop. To help ensure a smoother experience please read our letter about our current shop policies.
52101769-00, 2 available, version with wire update (TASCAM) add-on. This is a normal Teac manufacture standard design of a board of this version. It's an early version board and slightly rare. Board works the same as later versions. Condition 8. $44 deduction from total price if customer sends in their board as a core unit (we will probably fix and resell later)
Part #: 52101740-01 #9 Condition.
52101770-00, 2 available, these have add on wire modes, condition 9. $44 deduction from total price if customer sends in their board as a core unit (we will probably fix and resell later)
bias PC board, #52101771-02, complete board, pulled from working unit, good #9 condition (Sold but possible others available)
Power supply and reel motor control board. Complete with mounting tray, screws, and DIN connector. Excellent condition.
Includes function/logic control part #5167525101, transport keys/boards #511700, and all connectors and mounting hardware. Easily slips right into unit. Excellent condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Updated power supply with bypass caps. Slight variation exist and some updates can be done to improve board. But all PCB will replace and operate OK. #8