For X-1000. Remote control and cable for many models, does auto-reverse, rec. 20' cable with 12 pin rectangular connector. Tested, very low use, very minor finger wear, #8+
1/2 inch tape: Many reels available. Nice but obvious use wear, with writing on some reels: ($12); Better condition and clean with minor marks: ($18). (no boxes) #8 condition
10" Reel Recorder, Auto Reverse. with NAB hub adaptors. Black face version. Complete professionally cleaned calibrated. Heads & Mechanics excellent, recent new belts, like new Pinch. (RC-100 wired remote is available additional $130 Listing # 54640) 8+ condition
10" reel, auto-reverse. Heads 80% good. Recently installed auto-stop switches. Cleaned all controls, mechanics, etc. Bias/EQ set for Maxell tape. 185nW standard, 0dB at center detent on output. Some minor upgrades including shielding of FL meters.
Contact us about similar items or replacement parts.
3 motor, 3 head stereo tape deck. 1/4 track stereo format. Large/small reel selector, Hi/Lo speed. Left/Right record on/off switches. Bias, EQ STD/LH switches, tape/source monitor switch. 1/4 inch mic ins on face. 1/4 inch phones out. L/R mic, line level controls, L/R output control. Silverface unit with analog counter. Fully serviced and calibrated to Maxell UD 35/Ampex 456. Head 80% good. Speed runs 1/2% high by design. Modification to Rec Bass EQ to nicely improve deep bass response and tape / drive levels. Big VU meters, now has hub adapters (9/10 condition), has original manual and schematic. 9/10 condition.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
4 Track, 2 channel Stereo Deck. Left/Right Line/Mic Level controls. 1/4 inch mic input on face, 1/4 inch headphone out. Tape/Source monitor, wide range low noise tape selector. 3 3/4, 7 1/2 inch tape speed. Rec mute on/off. Output level control, digital counter/minute feature. Silverface unit. Fully serviced, minor staining on face. Excellent calibration (Ampex 456/Maxell UD35). Has hub adapters and original manual. 8+ condition.
Contact us about similar items or replacement parts.
Rack mount, Heads are 95% good, Calibrated to Ampex 456, Maxell UDXL (in LH position), unit was serviced, corrected head adjustments, adjusted brakes, #9 condition, slight staining on front
Contact us about similar items or replacement parts.
Function Play, rewind etc. complete board, relays etc. RWS-051, CMK-60Y, RNP-342, color wires attached. Low use, condition: 9
Dual flutter roller design. Key button operation. Compact 7 inch reel. 3 3/4 and 7 ips. EE setting is Maxell Ampex 456 Standard. Headphone, mic inputs. Heads 90% good. Level control at #7 is 0db. New belts, calibrated. 9/10 condition.
Contact us about similar items or replacement parts.
Remote with 20 foot cable. LIKE NEW #9 Condition
8 track 1/2 inch reel to reel. Function select buttons for each channel. VU meter for each channel. Unit has had ruggedized motherboard re-soldering ($200 value job). Ampex 456 calibrated, +/- 1 db all channels. Fresh pinch roller. Heads low use 9/10 excellent condition. Missing badge, mismatched hardware. Mechanically perfect. 8+/10 condition.
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs.
1/4" 2 track deck. Mic/line/output controls. 1/4" mic L/R inputs on face. 1/4" phones jack. Dolby FM/ Dolby NR/ tape, source monitor/ rec bias/ rec EQ/ rec mode, switches, 2 V/U meters, hi/low speed, counter. Low hours use, fully serviced. Brushed aluminum face with wood trim. 9 condition.
Contact us about similar items or replacement parts.
Working machine parted due to poor cosmetics. Head Cover (8+ condition) $48, 2 Reel Tables (8 condition) w/spring $48 each, Board 50484110/TP-N88-S $28, Board 50484103 $24, Board 50484090/TP-N88-S $24, Board 50484080 $24, Mic/Line/Output Controls $16, 2 L/R Mic 1/4 inch jacks $4, 1/4 inch phone jack $4, Function Board 51670623 SOLD, 2 V/U Meters 51650280 $20 each, Board 50484171 $16, Board 50484071 $14, Board 51673310 $36, Tension arm switches $18, Power/speed switch assembly $18, 2 Reel table black plastic rings $6, (2) reel motor caps 3.9 uf, 9uf $22, (3) control knob 1 chrome , 1 plastic #8 $14, pinch roller Cover & 2 washers #7 $16, counter belt $4, flywheel /capstan $30, play engage solenoid $8, sideboard hardware $14, screw kit from machine $14, cue lever $14.
1/4 inch, 1/4 track format deck
Contact us about similar items or replacement parts.
4 track 1/4" format. Features include: high/low speed, normal/high EQ/bias, 2 and 4 channel playback. 4 1/4" inputs on face, 2 Stereo RCA in/outs. Missing normal/simulsync on track 1. Excellent cosmetics and heads. Needs basic cleaning and calibration. Unit is worth Heads, Motor, Reel Tables,Headcover etc.
Intact machine that needs proper service. Good pinch, fresh drive belt, all meters light up and respond. However, the motor is weak and there are missing channels. Has hub locks (screw type). Cosmetically good, recommended for a complete overhaul. Condition: 8+
10" Reel, Direct drive motor system with 10" NAB Akai hub adaptors ($80 value). 7 1/2 / 3 3/4 speed stereo 1/4 track. The Wood Case is #9 condition. Very clean machine and Very slight (almost not noticed) oxidized stain on some areas of meters and controls with one minor scratch on head cover. 50/60Hz/ 100-240V operation. Pinch roller good with 1 minor dent, very reliable design. All calibrates to within +-/db both channels to 15kHz
Contact us about similar items or replacement parts.
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business. We strive to offer good products at competitive prices. While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run. We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
2 track 1/4 record play. Has switch on top of head with internal speed switch - does 15, 7 1/3, 3 3/4 (internal switch reset motor speed). Has old side Otari press fit hub adapters. Heads are 75% good. Unit has been cleaned and calibrated; we re-soldered the power supply board and motor board; calibrated to semi-pro level for use with all kinds of tapes. All mechanics are good. Better side boards. Face cosmetics are nice. Overall, there is obvious wear all over, but this is a good performing machine. #8- condition
Contact us about similar items or replacement parts.
Excellent performance. Mic inputs, mixing. 7" reel. 3 3/4 & 7 ips. Nice compact RtoR. Serviced +85% heads + excellent heads calibration.
Contact us about similar items or replacement parts.
4 Track, 7 1/2, 3 3/4, 1/4 inch, B Unit repaired, all cleaned & calibrated. Good Heads**** Unit has limited calibration control but records play excellent. Bias for Maxell UD 35 90. 1 case screw missing. condition 8+
For Parts or Service. Auto Reverse. Excellent condition, but unserviced. Basic switch cleaning done. Needs belt. Great for hobbyist who wants an inexpensive reel to reel. Has one channel out (preamp in). 8+/10 condition.
Rack mount. Heads are 80% good (shows a little staining). Pitch control. Calibrate service/cleaning. Faceplate 9/10 condition, nice excellent clean cosmetics, low use. No rack scratches. Calibrated to maxell tape. #8+ Condition.
Contact us about similar items or replacement parts.
Remote cable 28 feet. 24 pins. 9/10 condition.
Check us out on facebook.
Honda MR-50L. (2) 28 ft M to F connector for remote console.
4 track simulsync 1/4 inch tape. Pitch control. Metal Reel, Pitch Control, Hub Adapters, All channels within 1db tracking. Complete clean calibrate (1 meter replaced) 8/10 Condition, heads are at 85%, no feet on back or bottom #8+ Condition