counterclockwise direction motor with plastic pulley and lead wires. Excellent condition, cleaned, serviced, tested.
Contact us about similar items or replacement parts.
#9 excellent condition.
Contact us about similar items or replacement parts.
Decent cosmetics machine good for parts, non-functioning. Motor, heads, pinch roller all excellent. Purchase whole machine or inquire for specific parts.
Contact us about similar items or replacement parts.
Used Belts, pulled from Marantz PMD repair. Could be reusable with some service.
Contact us about similar items or replacement parts.
Single cassette record/ play tape deck. Record, play, stop, FF, RW, balance control automods select, dolby line in/ out L/R RCA. Black face plate. 8+ Condition. NEEDS REPAIR, need pinch roller align. 8+ Condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
#MMI-6A2LKXA DC 12V Motor with brass pulley , can be removed, CCW with leads, tested and lubricated, salvaged, #9 condition
Contact us about similar items or replacement parts.
#RXA-565, take up idler, new in package
Contact us about similar items or replacement parts.
12v, 2200rpm, DC servo motor with brass pulley. Excellent condition, tested and oiled.
Contact us about similar items or replacement parts.
Low use parts deck with good motor and head, bad belt and poor cover. Mostly intact. Uses motor MMI-6H2LWK.
A note on Sony TC-WR665s and similar cassette decks:
Many people ask about these machines, so here is a little info. Although they are a decent deck when running, this series had a tendency for the mech engage motor gear to break. They had a few other problems too: if the belt is the wrong tension, sometimes the unit will not allow the mechanism to cycle correctly, and if the cycle cam-finger positioner is sticky, the unit will not auto-reverse correctly. Occasionally the board connectors also get cracks at solder points. We sell the motors and gear assemblies, or we can service your machine if required. Call us directly at (617) 926-8020 for service or specific parts. Motor numbers will vary, but sometimes different motors will work in the same machine. For best results, send us a photo of your motor, or write down the part number and have it on hand when you call.Low use parts deck with good motor and head, bad belt and poor door cover. Mostly intact. Uses motor MMI-6H2LWK.
HXM-112 capstan motor with brass pulley, mounting bushings and screws. Excellent condition.
Contact us about similar items or replacement parts.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Excellent condition, includes pulley. Counter clock wise (CCW) 12 volt (Sold)
Contact us about similar items or replacement parts.
13.2VDC, 2000 RPM, 3 wires with pulley. Condition #9, oiled and tested.
Contact us about similar items or replacement parts.
(1) Mode motor for function cycle ($34), (1) Main motor 53700037(SOLD), (1) Rec play head 53786008 #9 condition (wear path just visible) ($38). Pinchrollers (call) , Preamp PCB 52101206-01 ($22), Index CAM finger (white plastic) ($30), 10k control ($8), Oscillators 52922-026 ($8), Back panel PCB 52101194-00 (call) . #9
includes eight gears for head azimuth setup, for replacement of stripped gears.
Contact us about similar items or replacement parts.
Control, mechanical parts, motor, etc., all in good condition. Please contact us for parts requests.
12vDC motor, with removable brass pulley.
Contact us about similar items or replacement parts.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
12vDC motor, counterclockwise, with plastic pulley and black finger clutch, easily removable. Excellent condition.
Contact us about similar items or replacement parts.
Single Cassette Recorder, motor EG-510-2B2. Unit looks very low use. Needs belts (look like common belts) Motor is good. Needs some what complex take apart Level 2 tech required. #7 condition.
with removable black nylon pulley. Excellent condition.
Contact us about similar items or replacement parts.
Excellent condition.
Contact us about similar items or replacement parts.
Excellent condition, surfaced lightly buffed. (same Head as PN: 53786012)
Contact us about similar items or replacement parts.
Capstan Motor. With 3 mount screws + 220mf/16v cap. Nylon pulley for capstan is removable. used. #9 Condition.
Contact us about similar items or replacement parts.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
(Not certain of current stock availability). One w/Motor Frame. aluminum capstan pulley, excellent condition. Call (617) 926-8020, See Vinc - engineering testing
includes white nylon finger, washer, hex nut. Excellent condition.
Contact us about similar items or replacement parts.