Unclear model number. 12 VDC motor with plastic pulley. For low torque design. Tests good. Condition 8.
Motor w/ chipped plastic pulley. Will not fit Nakamichi. Condition 9
Motor with brass pulley. 12V CW. Tested good. Condition 9.
12 VDC motor CCW. With brass pulley. Tests good. Condition 9.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Black. Excellent lettering, very very slight finger wear. Top and bottom edge has been carefully filed to remove minor edge scratches gives a silver high light to panel edges. Looks nice. #8 condition. DO NOT BUY THIS IF YOU WANT A PERFECT PANEL.
Pitch control with PCB-52101199-00 . #9 Condition.
Hubs, gears, door frame, micro switch, sensor reed, etc. #8 Condition.
Frame assembly, Springs, Screws, Wheels, etc. No Rubber. #9 Condition
Motor with pulley. Part Number: 70001200. Test, Low Use. #9 Condition.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
12 VDC CW or CCW operation, (same part as MMI-6H2LWPK for use in TASCAM PORTA STUDIO recorders) from low use salvage machine, (2) available, Tested OK. #9 condition
CW rotation, 6v DC, 2400RPM, Oiled and tested, Condition #9
CCW direction motor, with plastic pulley, Oiled and tested, Condition #9
Front loading cassette deck, silver face plate with multi-color meters (case is vinyl walnut veneer), piano style keys, Dolby B & Dolby FM w/calibration controls (rear), Large Analog VU Meters (3"x1.5"), Bias/Eq selection:Normal,CrO2,FeCr, independent level controls for mic/line(L+R w/ master control),No feet, minor corrosion in front panel, good motor, MH1-5R2CSY, rewind/FF good, belts good, low use, Condition #7
CCW with pulley, from known Low Use units, Tested good #8+ condition (4) available
All Remotes are now 25% off or Free Shipping!!! (Reel to Reel remotes excluded).
Tascam Porta One bias oscillator 52922 03901, Condition #9
Contact us about similar items or replacement parts.
Slips on front meter frame, Black with clear plexi front (5-3/32 W x 2-7/8 H), Also available - circuit boards, most other parts (call), Used - Good condition #8+
2 cassette transport, idler, pinch roller, heads, #9 condition - Call for price, 2 Motor MMN-5C21 - $22, 1 Control board GCMK-136EX - $20, Door covers, Knobs - call for price
(1) Swing arm, spring + washers only, $14, (1) Swing arm + idler (good if scrubbed up), $24, (NOTE: These parts are now scarce) Condition #9
Supply/takeup hubs, axels + lock washer
Nakamichi pinch roller, Nice condition, perfect, Condition #9
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
BFA2L36 capstan motor, with brass pulley, rubber mounts & color-coded lead wires, Cleaned lubricated and tested, Low use, Condition #9
Contact us about similar items or replacement parts.
2 available, priced each, Matsushita MMI-6S2LW capstan motor, 12v DC, with nylon/plastic pulley, (each motor has small board w/ diode + 10uf/50v cap + 6 leads ~ 3 inches in length), Used - pulled from operational unit, Condition #9