With terminating plug. Excellent #9 condition.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Part #9904 111 31813. Prometec (50hz 250rpm) with small regulator board. Excellent #9 condition.
Contact us about similar items or replacement parts.
For tone arm model RB 300 May fit others Excellent #9 condition.
Pair of black dust cover hinges for Technics SL-23. Spring loaded, with mounting screws for plexi cover. Excellent #9 condition.
Excellent condition, several available.
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Dust cover only, no hinges. 16" wide by 12.5" deep by 2" high. Excellent #9 condition, almost new.
Counterweight for Philips 212 or Philips 312 turntable. Very good #8 condition with some minor scratches. Two pieces available.
We have new original orange BIC stock turntable belts. For BIC models 940, 960, 980 turntables! ($16/ea.) 1 Available
We have new stock turntable belts for Philips 212, 312, and many other turntable models!
20"x13.875"x4.25" (slightly larger dust cover). Design with slide in hinges. Clear plastic slightly sun darkened. Very good #8 condition, top cover slightly warped.
Parts machine. Parts can be sold separately. Good #8 dust cover, SOLD ; excellent #9 base, $24; excellent #9 platter, $20. More parts available -( No Belt or stylus) - Call for additional parts.
To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
We have various automatic record drop spindles available here. Please show us a picture of the spindle you need. We have BSR, Bic, Garrard, Elac, KLH, Dual, etc. $10 to $20 each. *This part has become scarce in working condition; most spindles are missing little rubber record hole grippers. I have plenty of spindles but somehow small little rubber squares must be glued into "umbrella" stem to allow drop functions. Info online does not exist about this fix done by hobbyist but if doing it here, spindles would cost $48 due to fussy labor required to fix, test etc.
Two holes to mount screws, 1.25" pin length. Two pieces available. Very good #8 condition.
Complete arm stand for Bic 900 turntables, with mounting nut and washer. Excellent #9 condition.
With head and internal wiring intact. No headshell, weight, or cartridge holder included, arm only. Excellent #9 condition. (chrushed headshell not available to sell)
MMN-5B2R motor with original magnetic pulley. MFG# SFM4BD2N01E New in box. We now have additional motors that can be used as a substitute to this rare motor. Please contact us for addition information.
Contact us about similar items or replacement parts.
Idler #28, 40mm total diameter, about 1" inner metal diameter, 7mm outer rubber diameter. Excellent condition, many available.
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
300 rpm, 115 volts, 60 Hz, 1.5 watts. With color code leads attached. Excellent #9 condition.
A note on AR turntables:
We have had many customers write in asking about original version XA AR turntables. We rarely have any complete ARs, because we usually break them for parts - they are worth more in pieces than as complete units. Be aware this design has a number of faults that prevents these from being true audiophile turntables. The original arm cannot track a good quality cartridge (too much friction) and the arm is also too heavy, so that only a basic 2.5 to 3 gram tracking force low compliance design stylus can be effectively used. A modified AR with a new arm, dampened chassis and other mods can be nicer than some more expensive units, but there are plenty of better vintage Japanese turntables that can be had for around $200, that will simply work better with modern quality cartridges. I mainly deal with well-done technology that stays calibrated and is reliable and easy to fix, and most of my customers want a turntable that has auto-return, pitch controls, hinged dust covers, etc. AR were amazing for their brilliant suspension design, but the archaic arm design and motor rumble noise holds these units back unless they've been modified. I am happy to continue to supply parts for these turntables, and if requested I can explain how to modify the arm and suspension to be usable with a better cartridge.
Later version AR ES-1 turntables are superior turntables and the arm is excellent and not to be changed out! Only a correct cartridge type should be installed.
- Vince
Contact us about similar items or replacement parts.
# 20-47-1001 (24 pole), 300rpm synchronous. Tested, Excellent #9 condition.