Audio Proz Service and Sales

eBay Facebook

Category:

Turntable Parts
( 845 Turntable Parts sorted by Price High to Low.)
Image 1 Image 2
Filter Results:
Image 1 Image 2
Filter Results:
Bang & Olufsen Beogram 9000
# 61597
Dust cover scratches very obvious. Unit works. Mechanical internal cosmetics, arm platter excellent. Condition #9.
Contact Us
Make us an offer
Contact
Bang and Olufsen Beogram RX2
# 61698
33/45, cueing type 5833. Needs MMC5 Stylus. No motor MMX-4HZRPB, No Belt. New high quality phono connectors installed. #8+ condition - Dust cover could be buffed.
Contact Us
Make us an offer
Contact
Technics 1200 MK II
# 61777
Tone arm and base, in tact w/ connectors, bearings are good, tone arm rest, cueing mechanism, anti skate mechanism all intact, no counter weight, bad wire, for under arm mechanics, springs, #7 condition
Contact Us
Make us an offer
Contact
Dual Levers,1200 series
# 62805
Many various levers, start/stop, speed, pitch, 1200 series. Show picture of levers required ($12-$16 each). Used, #8+good condition.
Contact Us
Make us an offer
Contact
Technics SL-1200MKII
# 62923
1 pair (2) Turntable Feet w/good stems ($38). 1 pair (2) stems only missing feet, ($12). Rubber is in good condition, no cracks. #9 used good condition.
Contact Us
Make us an offer
Contact
To inquire about a motor you can show us a picture and/or find model number on your motor.
Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
Dual 1249 Base walnut look
# 63275
(good hinge springs) (28$)#9 condition, Platter and Mat (28$) #8 condition, Many parts available. Unit is mostly complete ( start lever is bent but usable)#9 overall condition
Contact Us
Contact
Technic 1200 MK II
# 63525
Turntable broken arm. Platter (#9 condition), Motor (#9 condition), Pitch control (#9 condition). Back hinge slot for 1/2 by 1/2 inch stem fit dust cover. Hinges , no feet, see other listing. #7 condition,
Contact Us
Make us an offer
Contact
Fisher MT-6360
# 63794
For Parts unit was known to be working but damaged cosmetics. (1) Arm lock , (1) Motor board with NEC D554C function IC. ($54) (1) bottom base. (2) 2902, JRC special servo or operation IC. (1) Display board ($24). (2) controls. (4) feet calibration spring (no rubber feet), Call for more info 617-926-8020.
Contact Us
Make us an offer
Contact
B&0 GR 1700 TYPE 5733
# 64008
1 - Motor MHN-3P2RDB $68, 1 - Motor speed board 49 2267030 $24 (with all parts wires intact has I. C. 1003C2 for speed control), Tested and oiled, known low modest use items. #8+ condition
Contact Us
Make us an offer
Contact
Technics SL-L25
# 64084
Full size linear tracking turntable. ( problem with computer to run operation, is a possible problem) Available motors OK (see listing # 70168)(LOCATED T-164). Platter #9 condition(20$), Mat #9 condition(20$), Cover #8 condition (20$), Hinges ($20 the pair), Main circuit board guaranteed working #SUPB40-2(A)($24)(Located: TT MOTOR) . Call for other parts. #8
Contact Us
Make us an offer
Contact
Yamaha TT-500U Motor
# 64224
#SFDPD2NO1A, Same as many Technics, Spindle cycle gear is cracked, repairable on request, Unit has special AN6639 motor IC, Condition #8 - $28 - Call for availability
Contact Us
Make us an offer
Contact
Bang & Olufsen RX-2
# 64444
Unit is functional but cartridge mmc-5 has bad grommets and will distort badly. Parts Available: dust cover hinge, motor, platter, Top (dust cover). UNIT NEEDS STYLUS. #8 condition.
Contact Us
Make us an offer
Contact
Sansui SR-333
# 70117
1 Drive motor board, with motor but motor itself has shorted coil, some work on drive circuit repaired (board works, parts value) - $28 (motor located in T-110) , 1 Transformer, model# 4002022 - $16, 1 Main power & control board with pitch controls and AC switch, S-0015 CMK-77X - Call to break specific parts, 1 Light bezel, All condition #9
(motor located in T-110)
Contact Us
Make us an offer
Contact
Technics SL-L25 Motor (2)
# 70168
(1) MMI-6S2PRI with pulley ($28) (1) Motor for Linear arm with pulley ($24) Low use tested & clean #9 condition
Contact Us
Make us an offer
Contact
Dual 1242
# 70277
Parts unit - Call for Price and parts. Available parts include : Dust cover - no cracks but typical swirls and scratches and can be polished out #7 condition. Platter Matte, Platter, Motor, Counter weight # 9 condition No Headshell. Please call for price and availability.
Contact Us
Make us an offer
Contact
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $24-$26 to ship for anything larger than an envelope.
Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
ELAC Miracord 760
# 70305
Various parts available - (All #9 Condition Pulled from working unit): Motor (w/ bushing Mts and wires, Part #18106691004) $30 - Idler Wheel w/ washers (Good rubber) $16 Platter w/ Strobe Matte $28, Counter Weight $18 , Single Play Spindle $18, Walnut Base with logo badge $24, Dustcover ( No cracks w/walnut handles #8 Condition Some scuffs at angled points on cover) SOLD, AC Power cord with connector, $12 Call for other Parts.
Contact Us
Contact
Bang & Olufsen RX
# 70699
Type (#5773) Many parts available. Unit in good working condition. Dust cover (SOLD) Counter Weight ($14) Platter ($20) Motor ($60) Cartridge MMC-4 (Call) Cartridge suspension is bottomed out. Belt removed. #8 + good condition. Dust cover is excellent!
Contact Us
Make us an offer
Contact
Dual CS-528 Full Automatic Turntable
# 70862
Parts available Motor, Platter, Platter matte, Counter Weight, Main Belt, Dust Cover. NOTE: No headshell carrier, No pitch belt.
Contact Us
Make us an offer
Contact
Sanko M09S12U15-6
# 71390
(0) Available. 9V, 12V CW motor. With plastic pulley. Like new. Condition 9. ( at this time we only have a substitute motor MMI-6T2RWK, possibly just a different wire pattern at terminal)
Contact Us
Make us an offer
Contact
ADC Accutrac 4000
# 71760
Automatic electronic control, motor - spins (CALL), good for dust cover (CALL), *arm stiff - horizontal plane (arm motor has corrosion), arm intact with counterweight fixed head shell (CALL), platter (CALL), matte (CALL), ADC LMA-1 Cartridge proprietary for use with optical sensor stylus/suspension good (CALL), condition #8 (call for pricing info 617-926-8020 12 noon -6pm)
Contact Us
Make us an offer
Contact
Luxman Type-8030
# 27986
Moving coil cartridge transformer
SOLD
Check for similar item
Contact
Luxman Type-8020
# 27987
Moving coil cartridge transformer
SOLD
Check for similar item
Contact
CS1268 parts
# 28587
We have many parts available, including platter, counterweight, mat, and motor, all in excellent #9 condition.
SOLD
Check for similar item
Contact
Technics 1200 solid aluminum 45 rpm adaptor
# 40504
SOLD
Check for similar item
Contact
Dustcover for Technics 1200 MKII
# 42335
With stem 1/2" square fit hinges on cover. Very minor scratches at top bubble. #9- condition
SOLD
Check for similar item
Contact
If you are calling or e-mailing about a motor, especially one that is rare or not specifically listed on our site, please include as many of the following details as possible: the direction the motor spins (clockwise or counterclockwise) when looking down the shaft, the voltage, and the diameter of the axle shaft (measured carefully). Also, a photo of your old motor is very helpful.
AR XA turntable headshell
# 45141
With wires. Very good #8 condition.
SOLD
Contact
AR motor pulleys
# 45313
Pulleys for AR turntable motor. Very good #8 condition.
SOLD
Check for similar item
Contact
Sony DNR-7600A motor
# 45348
Sony turntable motor with wires attached. Includes mounting plate with screws. Excellent #9 condition.
SOLD
Check for similar item
Contact
Technics counterweight
# 45447
3. 5 gram counterweight for Technics turntable. Half inch wide hole for shaft. Excellent #9 condition with one minor scratch near 0 mark.
SOLD
Check for similar item
Contact
Dual 1229 Turntable Mat
# 45627
11. 5" (diameter) turntable mat for Dual 1219 or 1229. Very good #9 condition with one obvious scratch on inner ring.
SOLD
Check for similar item
Contact
AR XA motor
# 45834
300 rpm, 115 volts, 60 Hz, 1. 5 watts. With color code leads attached. Excellent #9 condition. A note on AR turntables:
We have had many customers write in asking about original version XA AR turntables. We rarely have any complete ARs, because we usually break them for parts - they are worth more in pieces than as complete units. Be aware this design has a number of faults that prevents these from being true audiophile turntables. The original arm cannot track a good quality cartridge (too much friction) and the arm is also too heavy, so that only a basic 2. 5 to 3 gram tracking force low compliance design stylus can be effectively used. A modified AR with a new arm, dampened chassis and other mods can be nicer than some more expensive units, but there are plenty of better vintage Japanese turntables that can be had for around $200, that will simply work better with modern quality cartridges. I mainly deal with well-done technology that stays calibrated and is reliable and easy to fix, and most of my customers want a turntable that has auto-return, pitch controls, hinged dust covers, etc. AR were amazing for their brilliant suspension design, but the archaic arm design and motor rumble noise holds these units back unless they've been modified. I am happy to continue to supply parts for these turntables, and if requested I can explain how to modify the arm and suspension to be usable with a better cartridge. Later version AR ES-1 turntables are superior turntables and the arm is excellent and not to be changed out! Only a correct cartridge type should be installed.
- Vince
SOLD
Check for similar item
Contact
Technics turntable motor
# 45885
MMN-5B2R motor with original magnetic pulley. MFG# SFM4BD2N01E New in box. We now have additional motors that can be used as a substitute to this rare motor. Please contact us for addition information.
SOLD
Check for similar item
Contact
Rega motor
# 46487
Part #9904 111 31813. Prometec (50hz 250rpm) with small regulator board. Excellent #9 condition.
SOLD
Check for similar item
Contact
MMI-6U2RWO motor
# 47375
12v DC. Excellent condition, tested. Has original pulley. Can be used to substitute MMI-6T2RWO. Call for more information.
SOLD
Check for similar item
Contact
DMR-184B-61 motor
# 47379
With motor board and wires. Excellent condition, tested.
SOLD
Check for similar item
Contact
Regarding Dual 502 and similar models, be aware virtually no good sounding clone, counterfeit or replacement stylus for older cartridge types exists at this time for Shure, Empire (not great sounding anyhow) ADC, Stanton, Sonus AKG etc.
At this point only a few companies have genuine correct and a clearly better sounding true 3x7 nul stylus as in Audio Technica (best money spent) Grado, Ortofon and Oyster (not too bad of a deal) have real honest good sounding stylus. Some retailers are repackaging a $9 clone stylus at $30 and $90. The retail price does not make it better, it's dishonest. The simple fact is a correctly chosen better Audio Technica cart/stylus at $50 to $120 is a better product sonically than most $200+ price fancy name brand products.
Contact us for ordering information at sales@audioproz.com or (617) 926-8020
MMX-3H2RPA motor
# 47380
DC 12v. With speed control board. Excellent, tested. This is a commonly requested part used in many turntables, we should have a substitute available. Contact us and include your phone number for fastest ordering.
SOLD
Contact
MDC960N motor board
# 47393
SS09BA 100143. With wire harness and switch. Excellent condition.
SOLD
Check for similar item
Contact
Sankyo motor BFJ6R06T
# 48277
Excellent condition.
SOLD
Check for similar item
Contact
Sankyo turntable motor SHR2R
# 48503
With brass pulley. Low use time, excellent condition.
SOLD
Check for similar item
Contact
JVC QL-A5 counterweight
# 49255
SOLD
Check for similar item
Contact
Matsushita cassette motor MMI-6S2PR
# 49420
12vDC, CCW tested. Used, in excellent condition tested. #9
SOLD
Check for similar item
Contact
Matsushita turntable motor MMI-6P2LKB
# 49421
With brass pulley, new.
SOLD
Check for similar item
Contact
Matsushita MMI-6S2RWH motor
# 49564
12v motor with brass pulley. This is a cassette motor, but could also be a turntable motor. Excellent condition.
SOLD
Check for similar item
Contact
Sony PS-LX220 or Akai AP-B110 dust cover hinges
# 49977
2 black metal hinges for a turntable dust cover. No Plastic. Fits many Japanese turntable models like the Sony PS-LX220, Akai AP-B110, HH Scott PS88. Excellent #9 condition.
SOLD
Check for similar item
Contact
Garrard idler
# 49981
Common idler for many Garrard and KLH tables. Measures 15/8"x1/4". Excellent condition.
SOLD
Check for similar item
Contact
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.
Please be aware that there is a minimum $4-$6 to ship any part.
Dual 508 counterweight
# 49999
For Dual models 506, 508, 505, and others. Very good condition with some minor scuffs.
SOLD
Contact
JVC
# 50255
T. T. Motor, board marked JVC S73HB, motor MC932C17222, coils tested, #9 condition
SOLD
Check for similar item
Contact
Matsushita motor MMN-4H2RPA
# 50293
This is a scarce, hard to find motor !!! We are currently out of stock. If possible, please send us a picture of the motor you want to replace when you make your request. Substitute motors, when available, will cost about $36. USD plus $8 shipping in USA. (about $16 shipped overseas)
SOLD
Check for similar item
Contact
Philips motor 01059171
# 50310
From GA 212 with large brass pulley 1 1/8" diameter, 1/19" width. Includes mounting bracket and lead wires. Very good condition, cleaned and tested.
SOLD
Check for similar item
Contact
Technics SL-B200 motor and board
# 52242
Motor MMN-6P2RB $32 SOLD; control/speed board SFDPB62 $18; controls and switches for speed $14; or all for $50. Very good condition.
SOLD
Check for similar item
Contact
Micro Seiki MB-10
# 73072
Platter mat. Nice. Condition #9
SOLD
Check for similar item
Contact
Quanta BSR Model 400 Counterweight
# 53297
#9 condition.
SOLD
Check for similar item
Contact
Onkyo and others
# 53622
Motor MMU-5P2RWZ. 12 volt with pulley and circuit board. TEST GOOD. LOW USE. #9 condition.
SOLD
Check for similar item
Contact
Micro Sieki MB-10 Counterweight
# 54125
#9 will probably fit MB-10 Substitute Counterweight, Heavier than original weight but has correct shaft diameter. Probably work OK with heavy cartridges.
SOLD
Check for similar item
Contact
Fisher MT 100
# 54445
Single hinges for dust cover. Standard 25mm wide fit at bottom. 40mm wide, 20mm high. Fit into cover, spring loaded hinge. Matte black, heavy coil spring. Fits many other turntables. #9+
SOLD
Check for similar item
Contact
Spare or substitute parts may be available. Email Us at sales@audioproz.com and include a picture and/or the number on the unit. We make excellent spare part selections.
Dual 1237
# 54839
Start/stop panel, with lever. 3" square black and silver. #9
SOLD
Contact
Dual 1249 and others
# 54860
Used Belt. Pulled from non repairable unit. Good condition #8
SOLD
Check for similar item
Contact
Dual 1249 and others
# 54861
Single play spindle. Chrome plated will also fit 1019, 1209, 1215 1219, 1229, Condition#9
SOLD
Check for similar item
Contact
KLH Model Eleven and others
# 55136
Rubber idler, with original locking washer. Good used, #8
SOLD
Check for similar item
Contact
Dual CS-616Q hinges
# 55330
(2) Grey plastic hinges. Salvaged, like new. 9 condition.
SOLD
Check for similar item
Contact
BFF2R90T Sankyo
# 55432
Motor, with pulley for belt. DC 12 volts for many T. T. Designs. 3 screws, shock rubber included. Salvaged, no use, 9 condition.
SOLD
Check for similar item
Contact
6 Hole Headshell with Top Screen Wires
# 55433
Yamaha and others 6 hole headshell with Top Screen WIres. #9
SOLD
Check for similar item
Contact
Pioneer PL-230
# 55655
Platter and Matt. 12. 25 inch platter with strobe marks on underside. Has original custom anti-static. Black rubber mat. Salvage from low-use unit - minor nicks on edge. 8+ condition.
SOLD
Check for similar item
Contact
Pioneer PL-230 Motor
# 55656
PXM-097, 0 21119-A, also has speed control board. Condition: 8
SOLD
Check for similar item
Contact
Motor #M712G-09505Y
# 55850
Same as M712L-1053Y and S275-12D. Has original brass pulley. Salvage item with low hours use. Condition: 9 (this is a hard to find motor we are trying to source more, contact us about possible availability 617-926-8020)
SOLD
Check for similar item
Contact
Sold items are kept on our website as a record of the kinds turntables we have sold or serviced.
Please feel free to inquire if interested in any of these items.
Scott PS-59 & others
# 55917
Dustcover hinges, black. Salvaged from low use unit. 9 condition.
SOLD
Contact
Technics SL-QD35
# 56208
Dust cover. Intact, no visible scratches. 6/10 condition crack in cover good for protection.
SOLD
Check for similar item
Contact
Sony PS-LX300H
# 56375
Counterweight. Chrome finish with black plastic weight indicator with white lettering. Excellent finish, no pitting or hazing. 9/10 condition.
SOLD
Check for similar item
Contact
Sony PS-LX300H
# 56376
Motor. SHP2R. 41-7515A. Wiring harness and connector intact. Salvaged from low use machine. Oiled/tested. 9/10 condition.
SOLD
Check for similar item
Contact
Dual 1245 and others - SM 860-1 motor
# 56618
Motor complete with spring, pitch adjust assembly, pulley; original wire harness is intact. Screw/nut style mount, with original mounting hardware. Salvage from a low use machine. Oiled and tested, with a rebuilt pitch adjust mechanism. Condition: 9
(To inquire about a motor you can show us a picture and/or find model number on your motor. Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque).
SOLD
Check for similar item
Contact
Dual 1245 and others - counterweight
# 56835
Shock mounted brushed aluminum counterweight in black plastic housing, with stem. Has original set screw-brushed aluminum. Salvage from low use machine; some light scuffs on end. Condition: 9
SOLD
Check for similar item
Contact
Dual 1229 motor
# 56837
Round motor with 3 mount screws, and 60 hz pulley. 3 speed. Original wire harness intact. Salvage from a low use machine; oiled and tested. Condition: 9
SOLD
Check for similar item
Contact
Sony motor DNR-7600A
# 57606
Motor MMN-602RESA. With hardware and brass pulley. #9 very good condition, tested and working.
SOLD
Check for similar item
Contact
B+O Motor
# 57897
8VDC MMN-6P2LKA, salvage from low use machine. #9.
SOLD
Check for similar item
Contact
Thorens TD 165 Dust Cover
# 58230
Unit has typical problem of one hinge pivot slot point at back end has cracked away plastic, however it is still functional. Cover also has typical light scuff scratches over top, but could be buffed and polished to look nice, (will need some T. L. C. ) 7/10 condition
SOLD
Check for similar item
Contact
Used Cartridges: We have many used cartridges which have all been exchanged here for upgrades. They are all tested and working perfectly. Some may need a new stylus.
Technics
# 58671
Motor MMN-6P2RE with pulley, 9 condition $38. Motor circuit board with switches complete SFDPZ15MOZ, 9 condition $28.
SOLD
Contact
Numark TT1600 Motor
# 58990
MMN-6S6K8A with Bass Pulley. Low use item! 9/10 condition. Tested salvaged part.
SOLD
Check for similar item
Contact
Moretech Motor
# 59145
CCM09-120R2-9. 12V, 1030/1390 RPM. Also works with Audio Technica models. 9/10 condition. (very difficult to find motor we are trying to source more, contact us about possible availability 617-926-8020)
SOLD
Check for similar item
Contact
9V.12V
# 59170
For Audio Technica AT-LD2D. 9/10 condition, pulled from brand new turntable. Substitute MMI-6T2RWKO motor
SOLD
Check for similar item
Contact
Thorens TD 146 Motor
# 59175
With plastic white pulley, 1 spring. 9/10 condition, guaranteed low time use!
SOLD
Check for similar item
Contact
Bang & Olufsen Beogram 1800 (Type 5873)
# 71951
Turntable motor. Matsushita FG Servo. MMX-4H2RPB. 12VDC w/ servo control board. Wiring harness. Mount hardware (screws + bushings). Brass pulley. Pulled from working unit. Condition #9
SOLD
Check for similar item
Contact
Kenwood KD-67F
# 60843
DC 7. 4V motor. #MMN-6S7RPO. Salvaged from working unit. Oiled and tested. #9 condition.
SOLD
Check for similar item
Contact
Native Instruments Traktor Scratch A6
# 60956
6 channel digital vinyl system with power supply,RCAs, original box with 2 scratch vinyl discs, this machine has seen very low use time, virtually in new condition, used, #9
SOLD
Check for similar item
Contact
Technics SL-1200 full size platter mat
# 61603
SL-1200, SFTG 172-01, original 11. 5" full size platter mat, excellent condition, #9
SOLD
Check for similar item
Contact
Dual 1229 strobe, neon lamp assembly
# 61996
Complete assembly, strobe, window, neon bulb, original neon light, still good, about 1/2 life left, condition # 8
SOLD
Check for similar item
Contact
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business.
We strive to offer good products at competitive prices.
While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run.
We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Dual
# 61997
Pulley for turntable motor 60hz, fits 4mm axel, 3 speed. #9 condition
SOLD
Contact
Technics SL-1200
# 62015
Platter mat, black 11 3/8" diameter, rubber is good, a few obvious scratches, used, condition #7
SOLD
Check for similar item
Contact
Fisher PC-8 Dust Cover
# 62794
W/ Fisher Logo badge in center of top. Size: 15. 5"w x 14. 5" D x 4. 5"H. Note: May fit some "compact" units or console type receivers. No cracks, small scratches. 9- good condition.
SOLD
Check for similar item
Contact
Precept PCN-440
# 70050
Stylus only, beryllium cantilever w/ shibata nude tip. M 1 available Low use #8+ condition
Note: Cantilever slightly off center to compensate for anti skate.
SOLD
Check for similar item
Contact
Record Pro Carbon Fiber Record & Stylus Brush Kit
# 72617
(1 available) small square head on stylus brush -appropriate for use, Condition #10
SOLD
Check for similar item
Contact