Audio Proz Service and Sales

eBay Facebook

Category:

Turntable Parts
( 845 Turntable Parts sorted by Price High to Low.)
Image 1 Image 2
Filter Results:
Image 1 Image 2
Filter Results:
Philips
# 55129
Platter mat. Fits early version T. T. Aluminum, center ring 2 1/8 diameter. Black. 9 condition.
$ 16
Contact
Dual 1009
# 56110
Tone arm holder/clip; black plastic with brass mounting screw; salvaged from working unit - 8/10 condition
$ 16
Contact
Technics SL-QD35
# 56394
Set of feet screws, springs. Condition #9.
$ 16
Contact
Dual 1200 series
# 56438
Motor pulley, 3 speed, for 5 mm shaft. 50 Hz or 60 Hz capable. 9 condition.
$ 16
Contact
Dual 1200 series 1019
# 56439
*Maybe 1009 series, 1019 model. 4 speed motor pulley. Fits on 3mm shaft. 60 Hz line. 9 condition.
$ 16
Contact
Sold items are kept on our website as a record of the kinds turntables we have sold or serviced.
Please feel free to inquire if interested in any of these items.
Dual CS 616 Q, CS 1268 and others
# 56442
Counterweight. Brushed aluminum finish with dark grey insets. Missing aluminum trim cap at back. 8 condition.
$ 16
Contact
Hinges for Teac PA-400
# 57235
Snap style hinge. 1 5/8" plate and 13/16" stem width, with 2 cut slots. 1" length. Very scarce part, used on many models. Like new. Condition: 9
$ 15
Contact
Philips turntable mat
# 43870
With auto cycling sensing hole at mat perimeter. Like new.
$ 14
Contact
Yamaha Turntable Counterweight
# 45281
Bizarre "stealth" counterweight for custom Yamaha turntable. Has three holes to accomodate the back end of the tone arm runners. With small calibrated arm weight. Used in very good #8 condition. This is a very rare counterweight!
$ 14
Contact
Technics 1200 platter mat #0-22
# 45349
For Technics 1200 and others. Black with some minor wear. Very good #8 condition.
$ 14
Contact
United Audio WB19 base
# 45350
Walnut base for Dual 1219. Base has been repaired but is slightly off. May not fit dust cover correctly, but the wood look is excellent. Very good #8 condition. Call for more details.
$ 14
Contact
BIC 940 / 960 record drop
# 45382
Record drop. Excellent #9 condition. Three pieces available.
$ 14
Contact
Turntable headshell B111940
# 45410
Half moon front, black color. About 1 and 5/8 inches in length. B111940 marked on bottom. Excellent #9 condition.
$ 14
Contact
Dual 1245 Turntable mat
# 45628
Large (11" diameter) turntable mat for Dual 1245 or similar. Excellent #9 condition.
$ 14
Contact
Pioneer PNR-1025 Dual Aluminum Platter
# 45629
11. 5 inches in diameter. Very good #8+ condition.
$ 14
Contact
Used Cartridges: We have many used cartridges which have all been exchanged here for upgrades. They are all tested and working perfectly. Some may need a new stylus.
Philips GA-212 GA-312 arm
# 45887
With head and internal wiring intact. No headshell, weight, or cartridge holder included, arm only. Excellent #9 condition. (chrushed headshell not available to sell)
$ 14
Contact
Philips 212 belt
# 46149
We have new stock turntable belts for Philips 212, 312, and many other turntable models!
$ 14
Contact
Rega inner plates
# 46488
With spindles and axle. New stock.
$ 14
Contact
Rega inner plates with spindle
# 46489
Excellent condition.
$ 14
Contact
Bic 940/960/980 record drop edge holder
# 47209
Clamp to hold edge of record. 3" with black color clamp.
$ 14
Contact
Dual counterweight
# 47219
Square version counterweight with chrome knob on side, possibly for 1214 or 1215. Very good condition
$ 14
Contact
turntable hinges
# 47590
Pair of slot insert hinges used in many modern, inexpensive tables. 1 1/2" by 1 1/8" plate fits into cover, 1 1/4" fits into "T" slot on table base. All plastic construction, black color.
$ 14
Contact
Dual drop spindle
# 47680
For all 1200 series tables. Drop spindle for stacking record. Excellent condition. Three pieces available.
$ 14
Contact
Dual 1229Q
# 62804
(3) start levers, show picture , possible variations. 8+ used good condition.
$ 14
Contact
Sankyo motor VF02R14, 40809-A
# 48168
With wires, connectors, pulley, and shock grommets. Very good #8 condition, salvaged from low use machine.
$ 14
Contact
Spare or substitute parts may be available. Email Us at sales@audioproz.com and include a picture and/or the number on the unit. We make excellent spare part selections.
Sankyo motor BFB2R28
# 48169
Motor with wires, pulley, and shock grommets. Very good #8 condition, salvaged from low use machine.
$ 14
Contact
Sony PS-LX510
# 57634
Motor IC Toshiba TC9142P. Two Pieces Available. #10 Condition (New). $14. 00 Each
$ 14
Contact
Technics SL-1700 feet L-bracket
# 48387
Four cast aluminum arms to hold feet, no feet included.
$ 14
Contact
Technics SL-B210 dust cover hinges
# 48466
Pair of dustcover hinges.
$ 14
Contact
Turntable 6' power cord with ground
# 48517
Very good condition.
$ 14
Contact
Dual 1229 drop spindle
# 48590
33 1/3 record drop spindle for Dual 1209, 1229, 1219, 1214, 1215. Used in excellent condition.
$ 14
Contact
Bang & Olufsen counterweight
# 48929
Tone arm counterweight. Small version for all slim line turntables. Black with silver collar and axle. Very good condition.
$ 14
Contact
B+O Beogram 1600
# 60931
T-5712 platter, 11. 5", some very minor wear, overall very nice condition, #9
$ 14
Contact
Numark TT1600 Counterweight
# 58988
Counterweight. 9/10 condition.
$ 14
Contact
Lenco
# 49593
Speed strobe disk "original" for L78 #9+ condition
$ 14
Contact
To inquire about a motor you can show us a picture and/or find model number on your motor.
Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
KLH Model 20 Gerrard
# 61512
Over arm, minor wear, #7+
$ 14
Contact
BSR 45rpm spindle adapter
# 49909
Black color, 2 5/8" height, can play stack of 45's. New old stock. Note: This unit is for BSR units only. Appears similar to Garrard 452-SF/ FLRS 35 and KLH Model 20.
$ 14
Contact
Garrard idler
# 49998
Large version idler roller with a 2" (51mm) diameter and 3/32" (3mm) thick outer lip. Very good #8+ condition. NO IDLERS AVALIABLE - PLEASE CALL
$ 14
Contact
Philips 212 flat belt 1407-221
# 50088
New belts, all QC'ed by AP before sale. Several available.
$ 14
Contact
Dual 505-2 auto cycling lever reset
# 50263
Red arm about 2. 5" long with black lever and spring. Excellent condition.
$ 14
Contact
Dual 1219, 1229, 1209, 506, 508
# 50436
Many other models, cycle cams and center spindle, show picture of required part, most parts.
$ 14
Contact
Dual KS-4
# 50635
Auto on switch (no cover) salvage #8+ no cover
$ 14
Contact
Dual 500 series
# 50718
Belt shifting 33/45 RPM cycle levers, 2 types of levers exist, show picture of or exactly describe your missing or broken part, spring included, #8 condition, salvage
$ 14
Contact
BIC
# 60336
Turntable platter (980). Has minor scratches on edge, #8 condition.
$ 14
Contact
Pioneer PL-4
# 50774
Pitch control, board, and knob. Modified switch for reliability. 8+/10 condition.
$ 14
Contact
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $24-$26 to ship for anything larger than an envelope.
Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Dual 1219 1209 cycle cams
# 50950
Various cycle cams for older 1200 series tables. Please show us a picture, and we can supply a correct replacement.
$ 14
Contact
Technics motor IC AN6638 AN6637
# 51157
Same part, different part number for different uses. New. None in stock we will continue to search for more of this part.
$ 14
Contact
Technics SL-B202 platter
# 51159
Excellent condition.
$ 14
Contact
Technics head shell
# 51288
Black color, lightweight plastic, includes wires. Excellent condition.
$ 14
Contact
Audio Technica record sweep
# 61323
Arm with counter weight pivot + rest, missing roller brush, #8 condition
$ 14
Contact
Bic 980 counterweight
# 51343
Excellent condition.
$ 14
Contact
Philips 312 counterweight
# 51344
Black with chrome trim. Excellent condition.
$ 14
Contact
AT-PL50
# 59135
(3) dust cover hinges, $14 per pair. 9/10 condition.
$ 14
Contact
Technics SL-B10 platter
# 52160
Very nice condition.
$ 14
Contact
Technics Small add on counter weight
# 62464
Which adapts to end of arm at tail, Threaded half inch plug. #9 condition.
$ 14
Contact
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Technics SL-B10
# 52248
Pitch & speed switch boards, pitch board: SFDPB03M01, speed switch: SFDPB03MOI U-994, this is not the motor board, condition #9
$ 14
Contact
Dual 1219 on/off switch
# 52314
With mounting stud and c-clip for lever attachment. Excellent condition.
$ 14
Contact
Dual 1015
# 52332
On/off switch block with auto off, mechanically complete with cover and 3 screws, condition #9
$ 14
Contact
Gemini headshells
# 61203
Black lightweight design with finger lift (similar to Technics headshells), excellent condition, new, (2 available, priced as each), #9
$ 14
Contact
Dual 1015
# 52660
Arm holder & clip with screw, condition #9
$ 14
Contact
Dual 1218 tone arm lift lever
# 56855
Complete assembly, with the original nylon interconnect. Metal mount with spring (has original mount screw). Salvage. Condition: 9
$ 14
Contact
Technics SL-250
# 52968
Turntable feet. 3 available. 8+ condition. $14 for all three.
$ 14
Contact
Bic 940, 960
# 53059
Turntable arm stand holder and clip, condition #9
$ 14
Contact
Dual, Garrard, Others
# 53591
4 hole connector with AC and ground wire, fits all 1200 Duals.
$ 14
Contact
Onkyo CP-1200A ,1024F Sansui P-D15 and others
# 53623
Hinge. 2 1/2 mm bottom fit. 2 mm top fit. #9 condition. (1 only black hinge available) Priced each
$ 14
Contact
Regarding Dual 502 and similar models, be aware virtually no good sounding clone, counterfeit or replacement stylus for older cartridge types exists at this time for Shure, Empire (not great sounding anyhow) ADC, Stanton, Sonus AKG etc.
At this point only a few companies have genuine correct and a clearly better sounding true 3x7 nul stylus as in Audio Technica (best money spent) Grado, Ortofon and Oyster (not too bad of a deal) have real honest good sounding stylus. Some retailers are repackaging a $9 clone stylus at $30 and $90. The retail price does not make it better, it's dishonest. The simple fact is a correctly chosen better Audio Technica cart/stylus at $50 to $120 is a better product sonically than most $200+ price fancy name brand products.
Contact us for ordering information at sales@audioproz.com or (617) 926-8020
Stanton STR8-20 Metal Platter
# 57877
#9
$ 14
Contact
Fisher MT 100
# 54444
Power transformer for many turntables. #9
$ 14
Contact
Dual 1237
# 54829
KS4 auto on switch assembly. No cover. Low use, #9
$ 14
Contact
DUAL 1237 Cosmetic Parts
# 54831
- pitch control, cosmetic and mechanical parts, levers, knobs - 9 parts -#9 condition
$ 14
Contact
Dual 1237
# 54840
Platter mat. Black and silver, 1 1/2" center. #9
$ 14
Contact
Dual, Gerrard and others
# 54875
Power AC cord with ground. Small rectangular shape, 1", 4 pin holes. #8
$ 14
Contact
Dual
# 54882
Power cord. 4 pin plug(1" wide), 6' long, with two AC wires and white ground wire. #8+
$ 14
Contact
Dual
# 54883
Power cord. 4 pin plug, 1" wide connector, 6' long. Two AC wires and white ground wire. #8+
$ 14
Contact
Dual
# 54884
Power cord. 4 pin plug, 1" wide connector, 6' long. Two AC wires and white ground wire. #8+
$ 14
Contact
Technics SL-D2, D3
# 54960
Metal platter. Has deep inner magnet. Minor typical corrosion spots around edge and strobe, #8
$ 14
Contact
If you are calling or e-mailing about a motor, especially one that is rare or not specifically listed on our site, please include as many of the following details as possible: the direction the motor spins (clockwise or counterclockwise) when looking down the shaft, the voltage, and the diameter of the axle shaft (measured carefully). Also, a photo of your old motor is very helpful.
ESL dust bug
# 61324
Clear acrylic arm with brush roller, pivot point - not original, suction cup stand, #8 condition
$ 14
Contact
Dual 1219, 1209, other
# 55436
3 speed motor, pulley brass, for 60Hz USA operation, fits 4mm shaft on motor, salvage, #8 condition
$ 14
Contact
Pioneer PL-230
# 55657
Four original feet and rubber shock mounts. Has original set of mounting screws. Salvaged from low-use unit. 8+ condition.
$ 14
Contact
Motor IC 1003C2
# 62088
8 pin dip IC. Used to control many motors with regulator C1368 on board #6731V. Used, salvaged parts #9
$ 14
Contact
BIC 920 turntable counterweight
# 56392
Silver matte finish. Has black inset ring. Minor blemish on rear edge but otherwise in like new, 9/10 condition.
$ 14
Contact
Micro Seiki MB-10 Power switch and button
# 73074
Like new. Condition 9
$ 14
Contact
Dual 1200 series (1219, 1209, 1229)
# 56436
2 speed pulley for motor. Fits on 4 mm shaft. For idler drive design. 60 Hz line frequency. Condition: 9
$ 14
Contact
Dual 1209 and others
# 56437
3-speed pulley for 4 mm shaft on motor; possibly works on 50 Hz but can work on 60 Hz line frequency; 9/10 condition
$ 14
Contact
Dual
# 56440
3 speed motor pulley. Fits on 5 mm shaft. 9 condition.
$ 14
Contact
Dual 1209 function levers
# 56850
Levers for size/start function. Has metal top and aluminum trim on handle. 2 available. Salvage part with light wear. Condition: 8+. Others available, show us a picture of yours so we can match it.
$ 12
Contact
Sold items are kept on our website as a record of the kinds turntables we have sold or serviced.
Please feel free to inquire if interested in any of these items.
Dual 1219 start/stop lever
# 56846
Lever for start/stop operation. Has metal top and silver trim on handle. Salvage part with light wear. Condition: 8
$ 12
Contact
Dual 1219 index lever
# 56845
Index selector lever, with metal top and silver trim on handle. 2 available. Salvage part with light wear. Condition: 8
$ 12
Contact
Pioneer, Sansui, Kenwood, Others
# 61969
Add on wieght for back of tonearm. 1/2" high chrome-look screws into many vintage Turntable, existing counter weights to help to balance arm. #9 condition.
$ 12
Contact
Technics SL-B200
# 52241
Rubber feet w/mounting screws, 4 available, #9 condition
$ 12
Contact
Dual 1229 function levers
# 56847
Levers for index and start/stop. Black plastic top, aluminum trim on handle. 2 available. Salvage part, minor scuffs on trim. Condition: 8. Others available, show us a picture of yours so we can match it.
$ 12
Contact