Audio Proz Service and Sales

eBay Facebook

Category:

Turntable Parts
( 845 Turntable Parts sorted by Price High to Low.)
Image 1 Image 2
Filter Results:
Image 1 Image 2
Filter Results:
Dual motor AM 400
# 47384
With harness and connector block. Made in Germany. Excellent condition, tested.
$ 38
Contact
Sankyo DFSL07D 41102-A Motor
# 50560
Can go either CW or CCW depending on polarity of voltage, with brass pulley, tested and lubricated, salvaged #8 condition.
$ 38
Contact
Stanton STR-8 Motor with Pulley
# 60119
Motor #MMN-656K8A with pulley. 9/10 condition low use and tested
$ 38
Contact
Dual 1229Q motor
# 62001
Complete w/ wire leads, round motor axl size pulley, tested, oiled, condition # 8+
$ 38
Contact
Pioneer PL 12-D
# 54401
Complete tone arm with cue elevator and counterweight assembly. With ant-skate side arm weight, no head shell. Arm wire from arm stem is 2" long. #9
$ 38
Contact
Used Cartridges: We have many used cartridges which have all been exchanged here for upgrades. They are all tested and working perfectly. Some may need a new stylus.
Ampex phono preamp 4010097-01
# 48142
Phono preamp with RIAA equalization. (This is a Mono Device) , Uses 8-pin socket connector. (1 only) Excellent #9 condition.
$ 38
Contact
Dual 1015 motor 31 R-416
# 52330
4 speed, 60Hz. Excellent condition. No Pulley.
$ 38
Contact
Motor MMI 6P2RKB 12v
# 58204
12v 2 speed pulley, very common version, fits many models. Remove jumper for speed control. From low use, tested. #9+ condition.
$ 38
Contact
Pickering V15/AT3
# 71478
(2) available, priced individually. Clone stylus. PM4027D. Conical stylus. Tracking force 3. 0-5. 0 grams. NEW. Condition 10.
$ 38
Contact
Pioneer PL-12D
# 54925
AC synchronous motor. Has wiring harness attached. 120/240V selector board included. Has original rubber gromet mounts on top plate. Low use, oiled, #9
$ 36
Contact
Thorens TD 166MK II
# 64438
Counter weight . Black with silver numbers and scale. Very good condition #9
$ 36
Contact
Pioneer PL 12-D
# 54402
Pioneer PL 12-D Monor KXM-015-8 Has motor mount with rubber shock pads, complete wiring harness. Oiled, tested, good. 8+/10 condition.
$ 36
Contact
Bic 940, 960
# 53121
Motor, #20-47 1001 same as #18-008-05, has 4 pin Molex connector, tested, condition #9
$ 36
Contact
Matsushita motor MMI-6U2 RWO
# 57631
12VDC turntable motor, for Technics QT22D210. #9 used in excellent condition.
$ 36
Contact
Philips 212
# 54956
Smoked style dustcover -uses pin style hinge -covers 11. 75 inches apart on center -8 condition some minor dings and scratches but could be buffed to near perfect
$ 36
Contact
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $24 EVEN FOR SMALL PARTS.
KLH 20 dust cover
# 45991
20"x13. 875"x4. 25" (slightly larger dust cover). Design with slide in hinges. Clear plastic slightly sun darkened. Very good #8 condition, top cover slightly warped.
$ 36
Contact
Dual
# 49946
Motor, AM 400 with pulley, #9 condition, salvaged, tested
$ 36
Contact
Dual motor
# 49943
Motor #SM100-1; 3 3/8"x 1 7/8", 3 mounting stands. #9 condition
$ 36
Contact
Technics SFDP03M01 motor
# 47833
Turntable motor with board assembly and wire leads. Marked SFDP03M01 U-994V-1. 7/10 condition, needs repair, possibly its motor.
$ 36
Contact
Pioneer BL 12-D
# 54403
Dust cover and hinges. Complete top and bottom. Smokey tint color. Typical light scuffing & wear on cover. #8+
$ 36
Contact
Motor#MMI-6T2RWK
# 60266
9. 12 VDC with white pulley. This motor looks and fits the same as MMI-6T2RWKO. 9/10 Condition, no use salvaged. Missing hard copy
$ 36
Contact
LAST Formula 1 record cleaner
# 49783
Extra strength record cleaner with brush applicator. 2oz bottle with about 1. 5oz remaining.
$ 36
Contact
Dual
# 49948
Motor, AM 400 (missing label) with pulley, #9 condition, salvaged, tested
$ 36
Contact
Thorens audiophile mat
# 43892
With only center spindle hole. Like new.
$ 34
Contact
Sony motor 1-608-883-11 GCMK-45EX
# 52245
Direct drive motor with main control board. Excellent condition.
$ 34
Contact
If you are calling or e-mailing about a motor, especially one that is rare or not specifically listed on our site, please include as many of the following details as possible: the direction the motor spins (clockwise or counterclockwise) when looking down the shaft, the voltage, and the diameter of the axle shaft (measured carefully). Also, a photo of your old motor is very helpful.
Dual 1214 motor, # 221 062
# 52684
(no pulley), tested, low use time, same as AM 400 , also used in other Dual turntables. Condition #9+ (3 available)
$ 34
Contact
Sankyo Motor #VF02R18
# 57271
With brass pulley; low use, tested, in excellent #9 condition. Also available, power supply: $18.
$ 34
Contact
Motor MMI-6S2RWH
# 57234
DC 12 volt motor board, with switch, trimmers, white pulley with rubber shock, screw. Like new, #9+ condition. This motor works for many brands and models.
Note: This motor is not MMI-6S2RJ
$ 34
Contact
JVC L-A11
# 57661
Motor with grommets. Large version motor design with Hardware. Equivalent/similar too: INV. # 55850. This is common ac syncromis motor which fits many belt drive Japanese TT. Existing custom motor pulley will have to be changed to make for correct speed which can be removed by loosening base screw. #9 Condition tested, low use & lubed.
$ 34
Contact
Fisher MT-860
# 57665
Motor and Circuit Boards. Motor Sankyo VF02R18 with pitch control board. All wiring switches removed intact. Value is for motor and auto on/off switch. No use time salvage motor. #9+ Condition.
$ 34
Contact
Thorens TD-166 MkII counterweight
# 46770
Very good #8 condition, with minor light scuff on surface. Will also fit in some cases the Pioneer PLX-500 with proper add on weight. This is the lighter weight version counter weight.
$ 34
Contact
Pioneer PL-112D and others
# 54940
Original head shell. Black matte finish, brushed aluminum tab, wiring harness intact. For use on Pioneer S shaped tonearms #9 condition
$ 34
Contact
Technics / Panasonic SF-620 Turntable Motor
# 70185
Matsushita MMN-6P2RK 8 VDC motor with brass pulley , mounted on circuit board # SUP 15700A / TP-N88S from low use working unit #9 condition.
$ 34
Contact
Garrand C4 Carrier
# 60397
(pair- Can make one from two) Carrier pins need T. L. C. Needs wires. Carriers nice, Condition #8
$ 34
Contact
Thorens TD 146 Platter Mat
# 59173
11 3/4" in diameter. 1 5/8" inner diameter hole. 9/10 condition, low use LIKE NEW.
$ 34
Contact
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Dual 1015
# 52577
Square version turntable case, high quality wood, minor scuff on cover and rare, very nice condition #8
$ 34
Contact
OEM dustcover hinges
# 73062
1" metal "base" x 1 7/7" slotted clip holder. This hinge is used in MANY, MANY ! turntable types. Including Harman Kardon T-series units, JVC L-series & JVC QL series, Realistic LAB series, Sanyo Q-series, most Sony Turntables, many Yamaha units, and others ! (Priced for a pair)

Akai - AP-206, AP-207, AP-307, AP-A1, AP-B1, AP-B10, AP-B20, AP-B21, AP-D2, AP-D210, AP-Q41, AP-Q310 AR - AR the Turntable, EB-101, ES-1 BSR - Quanta 450SX Denon - DP-30L, DP-1200 Easter Egg - 123 Harmon Kardon - T35, T40, T45, T55, T60, T65, T70 Haybrook - TT2 Hitachi - HT-45, HT-460, HT-463 JVC - L-431, L-A10, L-A11, L-A21, L-A31, L-A55, L-F41, L-F66, QL-A5, QL-F61, QL-Y33 Kenwood - KD-40R, KD-50F, KD-55F, KD-600, KD-650, KD-990, KD-1600, KD-1600 Mk II, KD-5100, KD-8030, KP-1100 Kyocera - PL-601 Linn - Axis, Basik, LP12 Sondek Mitsubishi - DP-5 Panasonic - P200 Realistic - Lab-290, Lab-330, Lab-395, Lab-400, Lab-420, Lab-430, Lab-440 Sansui - FR-D3, FR-D35, FR-Q5, XR-Q9 Sanyo - Plus Q-40, Plus Q-50, Plus Q-60 Sherwood - PD-701B, ST-902 Siemens - RW777 Sony - PS-11, PS-22, PS-212, PS-242, PS-350, PS-LX2, PS-LX3, PS-LX4, PS-LX5, PS-T1, PS-T2, PS-T3, PS-T-15, PS-T22, PS-T33, PS-X22, PS-X30A, PS-X33, PS-X40,
PS-X45, PS-X50, PS-X55, PS-X55S, PS-X60, PS-X70, PS-X500, PS-X600 Taya - CP-260 Teac - TS-F50 Technics - SL-1400 Tensai - TD-855D, TD-8550, TD-861B Toshiba - SR-A100, SR-A200, SR-F200, SR-F335, SR-F440, SR-F450, SR-F451 Yamaha - P-200, P-220, P-300, P-320, P-350, P-450, P-500, P-520, P-550, P-700, P-750, P-751, P-850, PF-20, PF-30, PF-50, PF-80, PF-800, YD-850, YP-D71





$ 34
Contact
Dual 1214
# 52379
Motor with pulley, #227333, for 1214 and other models, condition #9
$ 34
Contact
Empire 990 Counterweight
# 58354
Dull brassy, gold look. 8+/10 condition (very minor scuff).
$ 34
Contact
Turntable motor FP20/4S WL
# 49922
3. 25"x2. 5" outer shell dimensions, with three mounting posts. Includes pulley and color coded leads wired to connector. Very good #8+ condition.
$ 32
Contact
Direct Drive Motor
# 52244
For various models, #DDM-6F, with 10 pin ribbon connector with spindle and magnet, new, #9 condition
$ 32
Contact
Thorens mat
# 43871
Heavy mat with eight radiating slots from center for dampening record. This is an audiophile quality mat!
$ 32
Contact
Thorens TD 166 MK II
# 70778
Speed selector mechanism for 33/45 . Includes steel rod and cage to guide lever as well as the screw . Also has the start stop switch. No tear drop handle included (check our other listings) Good condition #9 pulled from a damaged unit
$ 32
Contact
Thorens TD-110/115 Counterweight
# 71426
W/ mounting rod. Length 14/16" Dia 1. 25" Scale calibrated in 0. 5 gram intervals. Like new/excellent condition. Condition 9+.
$ 32
Contact
Dual 1214
# 62674
Dust cover, with "Dual" logo on center. 14"W x 11. 75"D x 2. 75"H. Small crack about 1 inch in right rear corner. #8 condition.
$ 32
Contact
To inquire about a motor you can show us a picture and/or find model number on your motor.
Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
Pioneer PL-112D motor
# 54938
For PXM-033-0, 60hz, 120/240v (no rubber grommets) with 3 mounting screws -reshaped brass pulley for correct speed -9 condition with low use and tested/oiled
$ 32
Contact
Technics SL-3
# 61037
Main board cracked, IC's: Technics (28 pin IC) *IC 301 onboard, AN 6554 (14 pin IC ($14)) IC 401, value is for IC, known working before board was cracked, #7
$ 32
Contact
Bic 940, 960
# 53057
Motor, 24 pole 300 RPM, for Bic 940, 960 - same as 18-008-05, tested ok, condition #9
$ 32
Contact
Preamp USB Board DL422U/UXL PC08P023
# 71389
Ion turntable preamp USB board. Board salvaged from unit with all cables and wires. Condition 9.
$ 32
Contact
Micro Seiki DD-20
# 59349
Hinges for dust cover. But kit only includes one reinforcement plate designed for dust cover. Another plate can be fabricated by customer out of plastic easily. Similar to many technic design. Nice condition, excellent working condition #8
$ 32
Contact
Dual CS 1237 turntable base
# 56873
Black plastic and vinyl wood veneer base. Includes dust cover spring mechanism. This is the base only and does NOT include the wire harness plate. Has original mount for stylus brush/45 adapter/multi play stem. There are several light nicks in the veneer. Salvage from low use machine. Condition: 8+
$ 32
Contact
MMN 652PR
# 64227
DC 4 Volt Motor, Salvage, Condition #9
$ 32
Contact
Dual CS 506 turntable base
# 56871
Black plastic and vinyl wood veneer base. Includes dust cover spring mechanism. This is the base only and does NOT include the wire harness plate. There are some light nicks and slight peeling of veneer on one side. Salvage from low use machine. Condition: 8
$ 32
Contact
Ion Preamp Board with USB Circuit PC05P002A
# 71388
Ion USB Board. PC05P002A. Preamp board with USB circuitry mounted on frame. Condition 9.
$ 32
Contact
Technics SL-B210
# 55567
Motor, (1) available MMN-6P2RE also (1) available replacement MMN-6C2RK, can be substituted Customer must provide pulley, and or sensor. Check proper (clockwise) motion when installing, low use from salvage, tested/oiled. (1 available of each number in this listing). Motor Only. $32 each.
$ 32
Contact
Spare or substitute parts may be available. Email Us at sales@audioproz.com and include a picture and/or the number on the unit. We make excellent spare part selections.
Lenco
# 53158
Drive idler. 2 1/2" wheel and arm with spring. For lenco and other under platter drive. Rejuve rubber. #9
$ 30
Contact
Mitsubishi LT-90
# 53584
Motor sankyo BFD2RI8. With pulley and board. #9 Condition. Salvage. Low use.
$ 30
Contact
Thorens 160 Rubber Platter Mat
# 43187
Original Thorens, like new quality. 9/10.
$ 30
Contact
Kenwood KD-48F
# 60226
Lipmat and platter together. Similar 33/45 speed switching mechanism to technics turntable. From working unit, tested #9 condition.
$ 30
Contact
Garrard Model 70 Counter Weight
# 73314
Gold color, 1 1/4" diameter, 3/8" threaded center hole. Has rubber suspension. #9 condition.
$ 30
Contact
Sony OS-LX150H
# 53494
Motor. Matsushita. MMI-6S2RWh DC12V - with removable brass pulley. #9 condition. Unused but salvage.
$ 30
Contact
Technics SL-BD27
# 53287
Motor. Matsushita. MMU-5P2RWZ 12 VDC With removable plastic pulley and rubber mounting holster. #9 condition. Tested, oiled. (M. I. A)
$ 30
Contact
Vector Research Dust Cover
# 46176
Dust cover only, no hinges. 16" wide by 12. 5" deep by 2" high. Excellent #9 condition, almost new.
$ 30
Contact
Dual AM400 motor
# 47236
With USA three speed pulley. Excellent condition, tested.

If you want to order a motor from AudioPro, please show us a picture of the motor you need to replace and specify its rotation direction (cw/ccw) when looking down at the pulley.
$ 30
Contact
Thorens TD 146 Counterweight
# 59177
Black with silver numbers. 9/10 condition.
$ 30
Contact
Regarding Dual 502 and similar models, be aware virtually no good sounding clone, counterfeit or replacement stylus for older cartridge types exists at this time for Shure, Empire (not great sounding anyhow) ADC, Stanton, Sonus AKG etc.
At this point only a few companies have genuine correct and a clearly better sounding true 3x7 nul stylus as in Audio Technica (best money spent) Grado, Ortofon and Oyster (not too bad of a deal) have real honest good sounding stylus. Some retailers are repackaging a $9 clone stylus at $30 and $90. The retail price does not make it better, it's dishonest. The simple fact is a correctly chosen better Audio Technica cart/stylus at $50 to $120 is a better product sonically than most $200+ price fancy name brand products.
Contact us for ordering information at sales@audioproz.com or (617) 926-8020
Empire headshell for Sony PS-FL3
# 56668
Silver with wires. Condition: 9
$ 30
Contact
Dual 1015 Motor switch
# 52662
Old early version, with AC auto on/off switch box, wires in with lever, low use time, tested, condition 8+
$ 30
Contact
Technics Head Shell
# 53519
For all consumer and pro T. T. With lead. #9 condition.
$ 28
Contact
Dual 1229 speed/pitch mechanism
# 61995
Complete, all parts in tact, springs, etc. .. Entire assembly was removed in tact from unit, condition # 8+ (NOTE: I have encountered 3 variations of this item We need a picture of what your original leaver looked like from the top side view siting position, maybe find a internet photo if necessary that matches yours exactly, so we can provide the correct version. )
$ 28
Contact
BIC 960, 940 Motor
# 55191
With Pulley and wiring, capacitor complete. Condition: 9
$ 28
Contact
KLH Model 20 Gerrard
# 61511
#40-60, 100-130V 0-14A, 10W motor, good condition, #8
$ 28
Contact
Thorens 166 165 147 mat
# 43893
Like new.
$ 28
Contact
Sanyo TP 1012 Counter Weight
# 72611
Silver with black dial & white numbers. 0 to 5g. 1, 3/16" diameter, 3/8" center hole. #9+ condition.
$ 28
Contact
AIWA LX-100
# 56112
Tone arm motor and assembly. For linear tracking LX-100. Assembly includes wire, gears, pulleys. Motor # MDN-7R4. 12-volume. Needs belt. Wiring harness intact. Salvaged from working unit. Oiled/tested. 9/10 condition.
$ 28
Contact
Dual 1249
# 54953
Counterweight. Shock mount suspension with stem, style brushed aluminum. 9 condition.
$ 28
Contact
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $24-$26 to ship for anything larger than an envelope.
Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Dual Pulley- 50 Hz
# 71839
3 speed, 4 mm shaft, used good condition, #9 Condition
$ 28
Contact
Dual CS 616 Q
# 55437
Transformer. Has original ribbon cable. AC cord has been cut. Has original black plastic cover. Salvage from working unit.
$ 28
Contact
Bic 940, 960
# 52915
Tone arm with base, complete with base, wiring, elevator, no counterweight
$ 28
Contact
Thorens TD 146
# 50833
Counterweight. #9 condition.
$ 28
Contact
AIWA LX-100
# 56113
Loading tray motor. MDN-7R4. 12-volume. 20 September 82 BA. Has original mounting bracket. Wiring harness intact. Has original brass pulley. Low use, oiled/tested. 9/10 condition.
$ 28
Contact
Micro Seiki DD-20
# 59421
Counterweight. Excellent, clean, condition #8
$ 28
Contact
Micro Seiki DD-20
# 59650
Metal platter. Chrome edge has obvious minor corrosion around rim. Nice clean condition #8-
$ 28
Contact
KLH model 11 and others
# 55134
Motor with original mounting rubber grommets and pins. Has original 16/33/45/78 brass pulley. Has complete original wiring harness, including switch and connector. Oiled and tested, minor rust spots, #8
$ 28
Contact
FP 20/4s WL
# 49931
Motor, color coded leads wired to connector, 3 1/4" x 2 1/2" outer shell dimension with pulley, 3 mounting posts #8+ condition
$ 28
Contact
Micro Seiki MB-10 Platter
# 73073
Metal platter. Very slight haze of oxidation. Easy to clean up. Condition #8
$ 28
Contact
Used Cartridges: We have many used cartridges which have all been exchanged here for upgrades. They are all tested and working perfectly. Some may need a new stylus.
Dual CS-616Q Dustcover
# 54086
Amber colored dustcover. Light scratches with buffing. 8- condition.
$ 28
Contact
Pioneer Turntable Mat
# 58685
PEB-008 D-11. Can be used in SLI1200 series. Very clean, a few visible scuffs- fits. 8+/10 condition.
$ 28
Contact
BIC 960 chassis
# 48416
Chassis only, no dust cover or base. Can be serviced or sold for parts.
$ 28
Contact
Dual 1229 speed select lever
# 56848
Dual, 1229. Speed select ever, Long shaft lever with notch for pitch adjust wheel, Has aluminum trim, Plastic top, Salvaged from working machine, condition is 8+. Shows wear on the trim. The item is not currently in stock as this is the rarest of levers.
$ 28
Contact
Dual 1009 for service or parts
# 48420
#8+ condition base and dust cover available, $22 each. Head shell, $28. Excellent cosmetic machine in need of service.
$ 28
Contact