Audio Proz Service and Sales

eBay Facebook

Category:

Reel To Reel Parts
( 1833 Reel To Reel Parts sorted by Price High to Low.)
Image 1 Image 2
Filter Results:

Pioneer RT-707 control function board RNP-370
# 52499
RNP-370 KRK-1394V-0, complete with two relays, wiring harness and switches (ffwd, rewind, stop, play, pause). Used in excellent condition.
$ 68
Tascam 388 Bal Amp PCB
# 70620
Part #: 52101735-02. Tested Good, #9 Condition.
$ 68
Otari MX 5050 BII HD
# 51225
logic board PB9A562A #PB-46R with 1-0012 IC. #9 condition, Salvage from working machine.
$ 68
Tascam 388 Input PCB
# 71271
52101732-00, 2 available, all controls cleaned, condition 9.
$ 68
Teac 4070G
# 55646
4T 2CH Play Head, 50667320, High density ferrite head, 48. 4. 13, Guaranteed no head wear, salvaged from low use unit, 9+
$ 68
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.

Please be aware that there is a minimum $4-$6 to ship any part.
Revox A77 two track record head
# 46707
#022 Revox two track record head for 1/4" tape, non-cutaway head version. Very good #8 condition condition, relapped head.
$ 68
Tascam 34 and others
# 55946
Pinch Roller. Design of pinch axel hole is protruded/wider than rubber roller. New rubber #10 condition
$ 66
TEAC A3340 S Head Cover
# 71999
Shows some fading of aluminium trim with small nick on "S" and rectangle Logo, pulled from parts unit, Good condition as noted, could be painted/sanded to aluminium, #8- Condition
$ 66
Tascam 48 motherboard
# 56874
#52101118-01. Intact motherboard with all wiring and pins. Very minor, tiny oxide spots, but overall in excellent #9 condition with nice, clean connectors.
$ 66
GC Electrics Bulk Tape Eraser
# 58897
Handheld High-Flux bulk eraser. 112V AC. 8/10 very good condition.
$ 66
Tascam 38 erase head #53783002
# 51442
With mounting hardware. Very good #8 condition with minor wear, carefully cleaned by AP.
$ 66
Akai
# 52149
GX glass ferrite playback head, 290 ohms, head shows typical, slightly porous surface, tested, condition #8
$ 66
Akai
# 56360
1/4" metal reel. NAB mount, 10 1/2" size. Silver/grey finish with slight iridescence. Comes in blank box. Virtually new, has unmarked Maxell UD sticker. 9 condition.
$ 66
Tascam 38
# 53008
Erase head. 8 Track 8 Channel. 53783002.
$ 66
Tascam 388 Input Channel Card
# 70608
(6) Available, 52101732-00, TP-S47-T. Controls cleaned. #9 Condition.
$ 66
To inquire about a motor you can show us a picture and/or find model number on your motor.
Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
Tascam 388 Buss Board B
# 70630
Buss Board B Part # 52101736-02. #8 Condition. Test Good
$ 64
Teac A-2300SX Reel table
# 73112
With axel tension heavy spring and adjustment screw. Needs basic clean, with lock spindles. (2) available, priced each. Condition #8
$ 64
Tascam 38 power supply board PCB-141
# 47886
Marked 52100 73400. Salvaged from working, low use time machine. Power Supply Board PCB-141 Color coded lead wires intact. #9 condition.
$ 64
TEAC A2300 and others
# 58148
Reel Table. Adjustable height, screw near Spindle 3 5/8" dia Spoked Design. #8+ minor scuff.
$ 62
Otari 5050 MK III - Takeup Reel Brake Assembly
# 73597
Takeup Reel Brake Assembly. Condition: 9
$ 62
Tascam 38 Supply Side Flutter Roller
# 61961
1" Diameter 8 groove design with cap and stem. #9 condition
$ 62
Tascam 34
# 63504
Logic, control board, PCB-137, 5210074201, used in many TEAC models, tested OK, condition #8+
$ 62
Tascam 388 Cap Servo PCB
# 72089
52101751-00 w/ meter mount bracket, salvage from low use unit, condition #8+
$ 62
Teac RC-602 Remote
# 27188
Repeat control unit. 4 foot cord with octal connector. For TEAC A-6010 Tape Recorder
$ 60
Magna-Cord Hub Adaptors
# 41900
PAIR. Compatible with all 10" reels with stem blocks. Plastic knob area slightly worn with small crack. One pair has light scratches on one side. Plastic knob area with metal cast zinc alloy base.
$ 60
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs. We keep our database up to date with over 10,000 items in stock.

If you see a part number and a price, we have that item in stock.

Customers outside of the U.S., please note that international shipping can be costly (US Post $24 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
Teac X-300 Tape Guide Balancing Flutter Roller
# 72122
Good Condition, (2) available, belongs to X300-R and Tascam 34 as well, Condition #9
$ 60
Tascam 70H Service Manual
# 43651
Complete and original (not photocopy like most eBay items!), in Tascam vinyl binder. Includes 70H-2, 70H-4, 70HX, 70H-8 models.
$ 60
Tascam 32 and others - EM1543 motor
# 56678
DC-10/24V, 12W motor. 2 available. Low use, excellent #9 condition.
$ 60
Akai Pinch Roller
# 47480
New rubber rebuilt on excellent condition core. For older Akai model reel to reel machines.
$ 60
Tascam 38 and others
# 54461
YG-673194 51675661 Motor speed control board for capstan motor. Tested good Condition #9
$ 60
Teac 80-8 1/2" flutter roller
# 46513
Part #5066459000. New old stock.
$ 60
Revox A77
# 60149
Pinch roller and arm assembly. 1. 077. 305/72289 10. New in bag.
$ 60
TEAC 2300, 2300 SD, 2340, reel table
# 71302
2" 3/4 inch diameter, (be sure to check your required diameter -variations did exist) small spokes on rubber table, lock stem good, has stains on metal but will clean up with TLC, condition 8.
$ 58
Otari KI-2-FB counter flutter roller with shaft
# 43156
Counter Flutter Roll w/ Shaft. KI-2-FB. New stock. Old version, Mark 3.
$ 58
Otari Counter Counter Supply Roller
# 43157
K1-2F-8. NEW STOCK.
$ 58
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Revox PR99 1/4" HUB ADAPTER
# 43300
With large, tooled metal flange, excellent 9/10 condition. AKA "Pro Hub".
$ 58
Revox B-77 1/4" HUB ADAPTER
# 43310
Plastic type hub adapter for 1/4" tape. 9/10 condition.
$ 58
Revox A77 and others - Tape Head
# 55792
#027, 2 track version with cut away edge. Head was 40% worn but lapped like new. Tested and fully functioning, in #8 condition.
$ 58
Tascam 48 channel card 52101105-01
# 48826
Audio channel card, record and play amp PCB. Excellent condition #9. (several available)
$ 58
Tascam 48 metal face plate
# 48810
Main operation metal faceplate with operation PCB board and buttons for rew, ffwd, stop, play, rwd, edit, reset, cue, etc. WEC-4 5210108700. Excellent condition.
$ 58
Teac A-2300SX Head Cover
# 73113
Nice Condition. Condition #8+
$ 58
Otari 5050B MK III
# 62418
Reel table and bullet spindle. Perfectly working but slightly stained and some minor corrosion. No dents but unit will clean up Ok. Condition #7A Part like this to ship overseas out of the USA can be a minimum of $24-$34
$ 58
Tascam 38
# 53481
Power supply board. With color code wires and most inter connect attached. #9 condition. From working Mach.
$ 58
Ampex 499 Grand Master Gold
# 48833
1/2" studio mastering audio tape in original box with no splices. Very good #8+ condition.
$ 58
Teac or Sony 4" Reel Table
# 45111
This reel table (1 only) has Teac style stem spring loaded to lock 7" reels in place. The brake band fits on the cylinder just behind the reel table. It may be for Sony or Teac. 4" wide with eight double band ridges. Very good #8 condition.
$ 58
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business.
We strive to offer good products at competitive prices.
While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run.
We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Revox A-77
# 51340
Woodcase very nice condition case/ handle, minor veneer peel on back corner, with case screws #8+ condition
$ 58
Pioneer RXA-871 pinch roller
# 46007
RT-707 or 701 pinch roller. $58 used - with wagon wheel on it #8 condition.
$ 58
Tascam 388
# 63492
Reel Motor 53700057-00 (2 available ). Very stained, corroded on outside. Work tested OK, #7
$ 58
Otari MX-5050 BII head cover
# 49308
With Otari logo and 1/4" splicing block and head mount screw. Heavily used in good #7 condition.
$ 58
Pioneer RT-909 Switch and Pitch Control
# 70569
RWS-079-A, RNP-755. Color code leads on board. Tested good. Salvage. #9 Condition.
$ 58
Teac 4070G Pinch Roller
# 55651
Has brushed aluminum cap, original washers, like new, salvaged from low use machine, 9+
$ 58
Tascam 34
# 62631
Left tension roller with cap and washer. Used, very good condition 8+
$ 58
Tascam 388 power supply heat sink
# 71314
Heat sink with 7 regulators transistors, tests ok, condition 9, see vinc.
$ 58
Otari MX-5050 Biii digital counter PB-7HUC
# 51239
Digital read out board and numbers, PB-7HUC, PB-9A922A. Excellent #9 condition.
$ 58
Otari MX-5050 Bii flutter roller
# 50006
Supply side flutter roller assembly complete with tachometer wheel and mounting hardware (tacho optical not included). Excellent condition.
$ 58
If you are calling or e-mailing about a motor, especially one that is rare or not specifically listed on our site, please include as many of the following details as possible: the direction the motor spins (clockwise or counterclockwise) when looking down the shaft, the voltage, and the diameter of the axle shaft (measured carefully). Also, a photo of your old motor is very helpful.
Teac A-2300SX Bias Relay Board
# 73146
Condition #9
$ 56
Teac main motor
# 46976
Teac part #7102103000. Main motor with motor hum shield and three speed pulley. Motor leads are 5" long. Used in excellent condition.
$ 56
Otari MX-505BII Operating Manual
# 42202
Photocopy
$ 55
Tascam Bias Oscillator Board
# 62436
521007490. Bias OSC 150khz. 52922015. Low use tested OK. 9/10 Condition.
$ 54
Tascam/Teac 48
# 48830
Bias board, OSC (150khz) AMPL PCB, 52101112-01, 2 available, condition 9+
$ 54
Heavy duty tape splicing block
# 49036
Highest quality, double cut splicing block. Original installed on Tascam 48 machine. Like new condition.
$ 54
Tascam 38 large supply flutter roller
# 50952
Aluminum roller, 1" wide fluted, with brash bushing 15/16" diameter. Includes screw cap and nylon washers. Excellent condition. (1 inch diameter NOT the guide tension roller)
$ 54
Otari 5050 B Head Cover
# 56210
Non Flip Up Cover. Missing tape splicer block. Hole for 2+ 4+ switch. Has cover which can be removed at top right corner. Condition #8
$ 54
Tascam 388 Channel Card Input PCB
# 71243
52101732-00, condition 9.
$ 54
Otari MX5050B flutter roller
# 47831
Supply side flutter roller for 1/4" tape. Nine pieces including washers and screws. Very good #8. 5 condition.
$ 54
Spare or substitute parts may be available. Email Us at sales@audioproz.com and include a picture and/or the number on the unit. We make excellent spare part selections.
Tascam 44 head cover
# 47902
With screw. Excellent #9 condition.
$ 54
ATR Master Tape
# 58387
1/4in x 2500. 10 in. New, 10 condition.
$ 52
Tascam 38 Supply side flutter roller
# 53011
With cap and one washer. #9 condition. NOT the tape flutter roller this is 1 inch diameter part.
$ 52
Teac A2300 reel table
# 47599
With twist lock spindle and axle shaft holder. Special design reel table has screw on table to adjust reel height. Six black bar grippers on rubber table. Very good #8+ condition with some very minor scuffs.
$ 52
Teac RC-1010 Remote
# 39095
Pause switch only, w/ 11 pin cable.
$ 50
Sony TC-250A parts deck
# 45689
Complete, intact machine in need of repair, good for parts or hobbyist. Very good #8 condition, all rubber 70% good or better.
$ 50
X-Edit Pro Editall Splicing Block
# 41478
For editing and splicing 1/4 inch tape. Magnesium body with plastic jewel case. Excellent condition. #9
$ 48
Tascam 38
# 62711
Bias oscillator board board 5210074900 with bias OSC 150K H2 part 52922015. #9
$ 48
Otari MX-5050
# 62208
(pair) Swivel mounting plates with locking swivel knobs. Allows deck to be tilted in stand or rack, and locked into position. Used, #9 condition.
$ 48
Teac 2300 reel table
# 48027
For A2300, A2340, A2300sd, and others. 2 3/4" diameter. Reel table for 7" reels, with spindle. Very good #8 condition with slight smoke staining but should be cleanable. Two pieces available.
$ 48
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
Tascam 388 Main face
# 71278
Very nice & clean, no scratches or letter wear, condition 8+.
$ 48
Otari analog VU meter (part #81305)
# 43154
-20 thru +3, hole in back of face for optional "peak" LED, tape covering face/cover. #8 condition.
$ 48
Pioneer RT 909
# 61836
Main capstan motor speed board #51675661, possible use with TEAC units with change of 2 resistors near trimmer controls, salvage, unit has seen high use but works ok, condition # 8
$ 48
Teac Play head
# 43326
#66903. New
$ 48
TEAC 5210046100
# 73174
Board appears to be playback PCB for DBX process. Board was split from another, other board-half may have been sold. (Split number: 5310046000) Unsure of compatibility & Original unit. #9 condition
$ 48
Teac A-2340SX head cover
# 43607
#8+ condition with minor scuffs on side of cover. Excellent otherwise.
$ 48
Tascam 38 channel cards
# 44215
Complete.
$ 48
Revox A77 pinch roller and arm
# 46760
New stock pinch roller and arm complete with tension spring. Part #1. 077. 305/72289. Two pieces available.
$ 48
Tascam 48 hub reel table
# 44349
Will not fit MSR16. Used in excellent condition, all brake felt and cosmetics clean.
$ 48
Tascam 38 reel table
# 46970
(1) with brake pad and two screws. Excellent #9 condition. (More can be available)
$ 48
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here)
We keep our database up to date with over 10,000 items in stock.
If you see a part number and a price, we have that item in stock.
Customers outside of the US, please note that international shipping can be costly (US Post $24 minimum - up to 8oz or 226g).

We are glad to combine orders to reduce shipping costs.

Take a look at our shipping policies for more information and estimates of prices and shipping time.
Tascam 38 flutter guide and cap
# 46969
Includes two washers. #9 condition (NOT the tape tension roller, this is 1 inch diameter grooved design)
$ 48
Tascam 34
# 62632
Flutter roller with cap and washer. Very good condition. #8+
$ 48
Otari 5050 BII
# 56415
Erase head. Half-track quarter-inch tape. Nice condition, obvious low use. 8+ condition
$ 48
Tascam 34
# 62634
Right tension roller with Cap and washer. #9 used good condition
$ 48
Revox A77 transformer
# 44786
For early version Revox A77 machine. With voltage taps for 150, 220, 130, 250, 110, and 240 volts. Original wire lengths. #7 condition, tested and good.
$ 48
TEAC 80-8
# 60556
Tape head cover, nice condition, minor wear and tear, some minor scuff marks but looks good, #8+
$ 48
Teac A-2340 power transformer
# 46978
With color coded leads attached, one 5" the other 10". Excellent condition.
$ 48
Pioneer RT 701
# 59770
Motor RXM 032, low use, condition # 9
$ 48
Pioneer RT-707 RT-701 Power Supply Board RWG-088
# 73493
Board has known low use from salvage, tested. Minor resolder board. #9 condition.
$ 48
Teac A2340 reel table and locking stem
# 46977
2. 75" diameter. Excellent condition.
$ 48
Check us out on facebook.
We keep our database up to date with almost 10,000 items in stock.
If you see a part number and a price, we have that item in stock.
Customers outside of the US, please note that international shipping can be costly (US Post $16 minimum - up to 8oz or 226g).
We are glad to combine orders to reduce shipping costs.
Take a look at our shipping policies for more information and estimates of prices and shipping time.
Pioneer RT 701 reel tables
# 61828
(2) reel tables only , Both without locking spindle, condition # 8+ (no scratches, just need cleaning) priced each. (For spindle twist lock tops see our listing 72091)
$ 48
Tascam 388 Buss A PCB Card
# 71246
52101734-01, used good condition (9).
$ 48
Otari MX5050 BII HD
# 52830
Supply side roller, cap and stand, minor obvious wear on edge, rolling bearing smooth, condition 8+
$ 48
Revox A77 tape mech counter
# 46759
Gear drive version. Very good #8 condition.
$ 48
Teac 80-8 flutter roller
# 48544
Supply side flutter roller, complete with axle, washers, nut. Excellent condition.
$ 48
Otari MX5050 B2 reel table assembly
# 50128
"Bullet spindle" version. Good #7 condition-- Reel tables are somewhat corroded, but the value is for the bullet spindle/plate/screws to replace your snapped off spindle. Supply and take-up sides both available, price is per each.
$ 48
Scotch open reel tape ½"
# 61546
On 10" metal reel, needs NAB hub, reel nice + clean, low use - no apparent splices, not sure of the tape type or length, balanced high quality reel, #8+ condition
$ 48
TEAC
# 59542
Logo reel 10" tape in Maxell box, Metal. Reel is in condition #9. Tape is in condition #8+. Box has 1 line of writing on it. Condition #8+
$ 48
Revox capstan axle
# 51048
1+7/8 ips speed. New. Probably for A77 MKI or MKII
$ 48
Akai GX220D Play, Line in Board
# 56902
#MS-5023 2ED. Tested, from a working machine. Condition: 9
$ 48
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $24-$26 to ship for anything larger than an envelope.
Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Otari MX-5050 B2 Head
# 55958
Reel motor with brake and hub assembly. MR1C012. On original mount. Has PB9A179A PCB with 6. 5 MF Cap. Salvage from working unit. 2 available. $48 each.
$ 48
Teac NAB Reel Hubs
# 72398
(2) Available, Priced Each, Black, Locking, 1 unit has sleight staining at bottom Rim, Excellent Condition, Condition #9
$ 48
Akai GX-220D Pinch Roller
# 55695
Has original brushed aluminum cap, original washers, salvaged from low use machine, 8+
$ 48
Tascam 48 sync interface PCB
# 49243
#52101086-00 WEC-4. Virtually no use time.
$ 48
Sony PP30-4202
# 71423
Tape head. Head could be relap, but is 65% good. Condition #7.
$ 48
Tascam 38
# 53480
Tape head socket block with wiring & color coded connector. All intact. From working machine. #9 condition.
$ 48
Tascam
# 55242
Tascam 44 and others. DBX jumper cable for DBX to audio. 16 pin rectangular both ends. 1 3/8 inch connector, male, female. 1 1/2 foot length. 9 condition.
$ 48
Teac A2340 reel table
# 47912
2 3/4". With adjustable height screw and adjustable lock spindle. Very good #8 condition with some very minor stains on edge.
$ 48
Teac X-1000R
# 51964
Brake hub with locking table(can be split apart). Excellent condition. #9
$ 48
Tascam 1/4" Nab Hub Adapters
# 61403
MINT! NEW! (Medium Green Gray Colour). #10. $48 each
$ 48
OUT OF STATE CUSTOMERS:
Contact us if you are interested in purchasing an item.
We prefer PayPal payments.
We only ship to VERIFIED PayPal Addresses
For customers who do not have a PayPal account we also take Credit Card over the phone.

Please be aware that there is a minimum $4-$6 to ship any part.
Revox A77
# 46056
10" reel hub adapters, original part in excellent #9 condition. With new rubber bands included. Price listed is for each single hub. Pair available.
$ 48
Teac X-1000R
# 51976
Lower face plate for meters and controls, black. 3 1/2" high. #9
$ 48
Teac X-1000R
# 51961
AC power transformer #5320014301 TT2KY1. With switch to change voltage from 100/120 to 220/240V. Excellent condition with mounting bracket. #9
$ 48
Tascam 388 Buss B PCB Card
# 71299
52101736-01, condition 9. Test Good.
$ 48
Teac A-2300SX Switch Panel
# 73107
6 switches on boards color code wiring. Condition #9.
$ 48
Otari MX 5050 Bii flutter tacho opto assembly
# 51228
Flutter, tacho roller, rubber and axle assembly, opto complete, excellent condition.
$ 48
Otari MX5050 BII HD reel table
# 53044
(2) available, rusty around edges but easy to clean up, condition 7+ (Price is for each)
$ 48
Tascam 48 38 right tension arm
# 49160
Take up side right tension arm, complete assembly with board, marked "Sensor PCB 52101094 00 WEC-4. " Does not have opto sensor board 52101093. Excellent condition.
$ 48
Tascam 38
# 62197
Supply side flutter roller Only - 1 inch diameter This is the grooved cylinder. #8
$ 48
Otari Motor MR1C012
# 56212
With brake, motor, cap, frame solenoid. Take up position right side.
$ 48
To inquire about a motor you can show us a picture and/or find model number on your motor.
Actually some model numbers are virtually the same except slight cosmetic (color) or historical change, or a top bracket mount is slightly different. Once the actual look is the same then it is the same motor. It is true that sometimes the motor rotor develops cracks and can have weak torque.
Tascam 388
# 63489
Supply flutter roller. 2 washers, crew and cap. ( not the outside guides tension roller) #9
$ 48
Pioneer RT 701 input switching board
# 61819
# RPN-430, 5 switches, condition # 9
$ 48
Revox A77
# 52826
Transformer #1. 077. 525, newer version w/6 position voltage switch, all wire lengths intact, slightly dusty, condition 8+
$ 48
Sony TC-366 tape head
# 55199
Record or play head. RP102-2902. 2 available, 85% good head, polish to #9 condition.
$ 48
Sony TC-366 tape head
# 55200
Record play head. PP102-2902. With mounting plate. Used head, 85% good, polished to #9 condition
$ 48
Tascam 48 left tension arm
# 49157
Supply side left tension arm, complete assembly with board marked "Senser PCB 52101094 00 WEC-4. " No rollers or roller caps included, just the tension arm. Excellent condition.
$ 48
Teac A2340 ff/rw switch assembly
# 46981
Three position lever with four function micro switches, with color coded wires attached. Excellent condition.
$ 48
Akai dust cover for open reel unit
# 70915
Fits better w/ GX Series, but not certain. 17" wide 17&10/16" High 2&1/8" deep. Akai logo in white lettering upper right hand corner. Soft plexiglass type cover w/ hinges (clip on type) on left side. Right side broken. Good condition, no major scuffs, but some small scratches; cover could be buffed. Read dimensions carefully. Condition 8-
$ 48
Teac
# 52852
Reel table & spindle, twist lock fits on existing collar, table rubber has center triangle w/3 grip chevrons, older version, condition #8, 2 available, $44 each.
$ 44
Tandberg Pinch Roller
# 57931
Part #990234. Small hole version. N. O. S.
$ 44
Local customers, please do not come to the shop without calling ahead first - (617) 926-8020 - for an appointment, so that we can more efficiently help you with your equipment or sound recording needs. We keep our database up to date with over 10,000 items in stock.

If you see a part number and a price, we have that item in stock.

Customers outside of the U.S., please note that international shipping can be costly (US Post $24 minimum - up to 8oz or 226g). We are glad to combine orders to reduce shipping costs. Take a look at our shipping policies for more information and estimates of prices and shipping time.
Tascam 48 Teac TP-N88-T speed PCB
# 48814
Speed switch PCB.
$ 44
Tascam 38 Operation/Maintenance Manual
# 43650
Complete and original! Includes complete calibration procedure.
$ 44
Tascam 38 Reel Motor
# 61590
(1) Reel motor, #EM1542 700027, DC 10/24V 20W, CCW/CW, lot 4100800, used, good condition, #9
$ 44
Teac or Sony 4" Reel Table
# 45110
This reel table has Teac style stem spring loaded to lock 7" reels in place. The brake band fits on the cylinder just behind the reel table. It may be for Sony or Teac. 4" wide with eight double band ridges. Very good #8 condition.
$ 44
Teac #EM1472 reel motor
# 46963
For A2340s and others. Supply side reel motor with brake band assembly and solenoid attached. Excellent condition.
$ 44
Pinch roller cap and washer for Tascam 34
# 54714
Probably fits Tascam 32 and others. And some other 1/4 track decks. Condition: 9
$ 44
MX-5050 reel table
# 47634
With axel collar and screws, no spindle. Newer version table with 24 oval shaped grips. Excellent #9 condition.
$ 44
Tascam 38 head plate
# 51443
With complete head wire harness and head shield connectors, guides, etc. No heads included. Excellent condition.
$ 44
Teac 3340s board #51670541
# 47131
Bias oscillator board. Excellent condition, color coded wires attached.
$ 44
Fostex R8
# 54846
2 available. Reel to motor pulley tooth belt. Wide width better version but functions same as thinner belt. Salvage, low use tested good. Condition #9 $44/each
$ 44
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment.
Revox A77
# 60151
Black Face Meter #077. 470-03172360. #10 condition, New in bag.
$ 44
Teac 3340s line amp board
# 47129
Circuit board for line amp and phone amp. Four trimmers on board. Excellent condition, caps checked and replaced where necessary. Color coded wires attached.
$ 44
Tascam 34 oscillator PCB
# 55554
5210074900 OSC PCB-108. Oscillator #52922-015. 2 available. Salvaged from working units. 9/10 condition. $42 each.
$ 42
Braun Motor 9904 120 10303
# 58628
9904 120 10303 Motor. 8/10 condition (a few minor cosmetic issues).
$ 42
Tascam 388
# 63493
Mix bus board, Bus A PCB 52101734-02, call maybe sell controls only. #8
$ 42