Compressor and noise gate pair mounted together in rack. Very good #8+ condition with many tiny minor scratches on ears and face.
8-channel Noise reduction System! w/ 5x410 and 4x411
8-channel Noise reduction System! Has 8 DBX 410 cards. Mint condition.
8 channel rackmount unit with DBX 410 noise reduction modules. RCA in/outs and multipin connector. Condition: 9
Declinear Noise Reduction System. With AP power supply upgrades, totally cleaned, serviced, calibrated. Nice wood sideboards, excellent mechanical and cosmetic condition. This unit contains a valuable VCA module.
We keep our database up to date with almost 10,000 items in stock. If you see a part number and a price, we have that item in stock.
Decliner Noise Reduction, 2 Rack Space, input level matching, RCA Jacks, 2 channel, simultaneous encode/decode
Contact us about similar items or replacement parts.
Noise reduction system, 2 rack space, 4ch, all RCA in/outs. No rack hardware included.
Contact us about similar items or replacement parts.
(2) with 2 holes 5/8 inch apart with hardware. 8+ condition.
type 1 unit, 2 channels A & B, noise reduction in/out switches, front panel: rec/play calibration level, rear panel: console input/output, tape input/output, no rack ears, scratches on top cover, condition #8
Type I noise reduction. single rack height x1/2 width. 1 11/16" HTx 8 3/8"W. RACK PAIR. NO RACK EARS. Missing knob on butterfly joint. To/from console, to/from tape rec. Calibration levels A+B on front panel, rec/play in/out switches. Tested and working 9/10 condition.
(1 in stock) Low use, mint condition. No rack mount ears. In original boxes! #9 Condition.
We offer expert time-saving advice on repairing many types of home and studio equipment, as well as consulting for product and recording issues, at a fair and reasonable cost. For complex matters, we sometimes must charge a small technical fee. If we can help solve your repair problem or technical conundrum, give us a call. (617)926-8020.
type 1 unit, 2 channels A+B, noise reduction in/out switches, front panel: rec/play calibration, level adjustment, rear panel: console input/output tape input/output, no rack ears, condition #9
Type I noise reduction. NO RACK EARS. Inputs: to/from console, to/from tape deck. Switchable voltage 120/240. Front Panel: calibration level rec/play. Channel A&B in/out switches for rec/play. 9/10 condition.
type 1 unit, 2 channels A + B, noise reduction in/out switches, front panel: rec/play calibration level, rear panel console: input/output, tape input/output, no rack ears! condition #9 no rack ears!
Type I noise reduction. Inputs: to/from console, to/from tape rec. Switchable voltage 120/240. Front Panel: calibration level rec/play. Channels A&B in/out switches for rec/play. No rack ears. Excellent condition.#9
Type I noise reduction. Two channels A/B, in/out switches, rec/play level adjustment, console in/out, tape in/out. Fully serviced and calibrated, excellent condition, rack ears included.
#u1501294. Type I noise reduction. Two channels A/B, in/out switches, rec/play level adjustment, console in/out, tape in/out. Fully serviced and calibrated, excellent condition, but no rack ears included. 9/10
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
half rack unit, phone in/out, 2 channel encode & decode, no rack ears, unit has a worn face, used as a rental unit, serviced and calibrated, condition 7+
Type I noise reduction #u1507276. Two channels A/B, in/out switches, rec/play level adjustment, console in/out, tape in/out. Fully serviced and calibrated, excellent condition, no rack ears included.
Type I noise reduction #u1507544. Two channels A/B, in/out switches, rec/play level adjustment, console in/out, tape in/out. Fully serviced and calibrated, excellent condition, includes rack ears. 9/10
Unit will do 4 channel encode or decode or 2 channel simultaneous 2 channel decode. Tested, calibrated. Unit requires minor calibration set up
Basic DBX noise reduction system
Contact us about similar items or replacement parts.
Type II tape noise reduction system. LED metering.
Contact us about similar items or replacement parts.
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
Dolby B. Outboard unit. RCA in/out. Encode or decode (not simultaneous) with level controls, test tone calibration, trim controls on front panel. Calibrated internally to +/- 1db tracking. 9/10 condition.
Click and Pop eliminator, excellent condition, modified - call for details
The TNE is rackmount and in like new condition, but I only sell the Audio proz modified version. (This is a highly in demand piece that usually has a waiting list) This mod makes the unit work remarkably better. The same is with the 1201A, which is in a slightly worn condition, but certainly very acceptable. This unit also has a modification. See our listing # 60892I was the chief line tech and production assistant at Burwin research and even though my modification is simple and clever, it took a year to design. I myself was desperate for a better, wider applicable performance. The unit works better with many phono preamp cartridge combinations. I do prefer Stanton and Audio Technica cartridges because these guarantee honest bandwidth and correct stereo separation which is critical to best nick pop elimination. The Stanton 680 or 681EEE or AT 311 EP or 440ML is excellent. Indeed the ART phono preamp with proper cartridge loading switches and level control will optimize the TNE performance. I am on the side of laboratory standard ideals and not audio-“phoolish”, intentionally off RIAA standard preamp designs, which can be sometimes interesting sounding, but is usually just strange equalization tricks to impress the consumer. In my opinion its best to have an out board equalization to fix the many and varied equalization “opinions” existing on the stereo-mix of the record. See all about the complete TNE mod service here: https://www.audioproz.com/AP.php?Article=46
Contact us about similar items or replacement parts.