With BA658 & BA614 integrated circuits; meter LD002R; and LD003G parts. This unit is being sold for individual parts, but it has not been fully tested yet, so it could potentially be functional or near perfect. Parts are used in many different models. Call for more info. Condition: 9
AMB-1493A with BA 858 and BA 814, ICs on board, will sell for indicidual meter, IC if needed must be removed, priced as each, #8+
pinch rollers, #002435 3.36, 2 available, excellent condition, condition #10
Direct drive capstan motor, servo type, very nice quality motor, 4 leads, 1 1/2" high body, 2 inch diameter body, 3 screw hole without mount boards, #9 condition tested good
with board marked TLC-751-T-V-0, excellent condition.
Re: International Shipping: We ship internationally often and have yet to encounter a problem or complaint. We are very careful to test the equipment before it’s packed and then to double box the machine with added protection when needed for front panels, etc. We are not amateurs or an ebay store; we know these machines very well and know what it takes to get them to you safely. We use USPS priority internationally which seems to be the cheapest. If you prefer another carrier (you should know who delivers to your area reliably) please let us know. Also please be aware of any tariffs that you may be responsible for upon pick up on your end. International shipping may be expensive but we will make sure it is not a headache on top of the cost. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
With belt motor # MSI-5B2LW. Salvage part in excellent #8+ condition, fully tested and working.
Special idler gear with 2 gears - $12 each. Motor MMI-6H2LWK - $30. Belt - $6. Head - $14. #9 Condition.
(3 Available) Matsushita MMU-5B2LWN1 12 VDC. With removable plastic pulley. 9 condition. Tested. Lubricated.
2 Belt Kits 1 Counter Belts, Capstand, Drive. Salvaged from machine.
Motor. MMA-6B2LA. 2 available. Modest use 8+ condition.
motor Mabuchi MSI-582LW, used - removed from working machine, condition #9
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $16 EVEN FOR SMALL PARTS.
Excellent quality meter, very good #8.5 condition. Two pieces available.
QJ1M0179NNM with AN6870N IC, #9 condition.
2.5" wide by 2" long, yellow dial, -20 to +3 dB. With dolby mark, so probably for cassette machine. Very good #8 condition with very minor scratches on dial glass.
For parts. Good motor ($38), mechanics, heads, etc.
Fits other models in this series, Wood Case Condition#9 ($24) Top metal cover, $12
Parts Machine: Function panel button $24, Case (7+ condition) $14, DBX Board $36, Face plate $24, Motor MMN-6C2LKB $28, Motor MMN-6C2LKC(SOLD), Main Logic Board $40, Faders $22, No LED Meters. Parts in 9/10 condition unless otherwise noted. No use machine. (Original Paperwork Missing)
Please be aware there is a minimum $4-$6 to ship any part. International orders will be $14-$16 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
For use as parts by hobbyist or can be repaired upon request for resale. Unit needs belts and some maintenance, intermittent connection at front panel board. Black brushed aluminum face with multi-function LED display, soft touch logic controls, dent on right side of metal cover panel.
Contact us about similar items or replacement parts.
This part is needed for panel tac switches and board. Includes the whole bezel which holds the switch. Good #8 condition with a minor plastic crack at play button face.
Motor: Matsushita MMA-6B2LWHKX; DC12V; 2 available; 9/10 condition
#55696061. Excellent condition.
Contact us about similar items or replacement parts.
From salvaged machine, guaranteed perfect condition.
New old stock. Possibly for 244, 246, 234.
Contact us about similar items or replacement parts.
FYI, Around the database you will often see us describe the condition of units on a scale of 1-10. #10 would mean the product is new from one of our suppliers, such as Behringer, Audio Technica, etc. #9 means the product is in perfect condition but is used, #8 implies there are some minor cosmetic scratches but unit is mechanically perfect, and so on and so forth.
4 track, 4 channel record play head with wire harness for Tascam portastudio, same for use with model 234, 244. Pulled from salvage unit, used good condition #8.
Sankyo BFV2R34 motor, with pulley. Condition: #9 More of these motors are being made available, contact us.
Contact us about similar items or replacement parts.