Professional scratch mixer, 2 channels, 4 phono inputs. Unit to be dismantled for parts. Various intermittent controls main faders good but switches problem. 7 condition
Gain control, 3 band EQ and AUX level control on ALL channels. Phantom power for all channels. *3 broken pots on CH 16 missing 4 knobs, very badly worn, visible scratches and wear, probably worth some controls, knobs, faders and switches, untested*. #7- condition. (call for parts)
10 channels, No power/peak meter. Indicator lights, Adjustments per Channel: Gain/ High/Mid/low/aux/pan/Level. Parts unit No L+R stereo out. (Intermittent if chassis tapped) Line In seems to be only way to get stereo R out. #7 condition
Professional 5-Channel DJ Mixer with Digital Effects and BPM Counter. Delay, reverb, flanger, filter, panner, ultrabass, exciter, Vinylizer, voice changer. SYNC LOCK and BEAT ASSIST. Low-Noise preamps. New in box.
Mic+line input, Insert/Direct out/Tape in, 8 bus, 6 Aux, 4 FX return, 48 V phantom power,4 band EQ, talkback, 2 VU meters, has full power supply and manual, Dimensions- 54"x 38"x 12", great condition as it was only used in a home studio for a long time, only is 1 channel is bad and 1 module is failed. Condition #8 PRICE IS NEGOTIABLE
(3) LINA 92 OMEG potentiometer, Small control for 1980's era products, originally for Soundcraft. new. $8 (6) 22 LIN 6530 B pots, these new listed controls are a very close crossfit to the LINA 92 pots. New $8
For parts, individual modules may be removed, 4 fader knobs, available, unit working but has several issues. Channel 2, 3, 4 Good. Left amp modules bad. Right module ok. 6 Condition.
7 Modules in place on 12 channel board. 7 panel strips. Will sell for parts or as complete mixer. Unit has intact boards, circuit design has MK transformers & cap/coil EQ circuit. Missing some knobs & fader caps. (1-Channel card has broken echo knob) Can be made functionally working unit. Excellent cosmetics, just needs final test/clean up. Faders feel good. #8 condition.
Expansion Mixer. (8 channel card/ boards) (in place) on 12 module rack. Missing some EQ knob caps. Faders feel to be OK. Can be made functional working unit.
-RCA Line In, XLR Mic In, RCA direct out. 4 Buss, Global Phantom, 3 Band EQ, 2 Effect Loops. 7/10 condition, all channels checked and OK, basic cleaning done, unit needs more TLC to make it saleable. WE MIGHT SELL BOARD FOR PARTS BUT THIS UNIT SHOULD BE THE ONE TO FIX UP AS IT IS 80% IN GOOD CONDITION.
For parts or as-is. 8 channel mixing console. Unit in excellent mechanical and cosmetic condition. Has defective Sony CX770 IC or noisy preamp IC, which could be fixed with correct install of parts. Great condition, #9
12 channel 8 bos board. 8 V/U meters. Mechanically intact, cosmetically intact. Available for parts or can be serviced and restored to full working order. Dents in wood side panels. Minor wear. 8+ condition.
24 channel mixer in original metal carrying case (built in), 3 band eq, Rev/Post/Pre send, XLR 1. 25" outs, possible power cable available, 4 pin XLR type, significant tape residue on front panel, missing sub 1/2 fader knobs, NO PS
4-channel mixer with 3-band sweepable equalizer per channel, PA send, and separate monitor send. 3-rack space unit. Needs board soldering (old foam corroded foils, requires major take apart 02/25)
14 channels, channel 1-10 xlr and 1/4" in, channel 11-14 1/4" for stereo or mono in, 6 aux outs 1/4", direct in for each channel 1/4", 4 stereo returns with individual controls 1/4", 2 stereo fx 1/4" each own levels, R+L Led Meter, 4 band EQ for each track and trim, GRPS, Mix, Phones, Power supply Rack mountable
Audio Technica DJ Mixer, Mic Fader with talkover switch, ch 1-4 faders with cue switches, master fader with cue switches, cue volume fader, 2 ch x-fader with channel (1/3 - 2/4) selection. Channel 1 & 2 (mic + phono in), Channel 3 & 4 (aux + cd in). Digital sampling section w/punch in for each channel and level, percentage, start/stop control, headphone out, bypassable echo section w/level, repeat, and time control. 5 band EQ, RCA in/out, 1/4" ins for 1 & 2, completely cleaned and serviced, excellent mechanical, mint cosmetic.
Top Quality Design with individual channel cards for ease of service. Sweep EQ Midrange, Quality Mic Pre. Mint condition All channel All controls check OK. Virtually no use time ! #9 condition
Mackie 24x8x2 (24 channel, 8 bus) mixing console. Needs Cleaning - controls scratchy and intermittent. This type of service would require a decent skilled tech to pull all the knobs, dismantle the large main board, and clean the controls with a recommended cleaner and reassemble. Our testing here has shown that 99% of the problems with this board are cleaning problems. It would probably take 3-4 hours to service. We would charge $300 to do the work ourselves.
2 phono or RCA line inputs, 2 1/4" microphone ins on individual faders. Talk over switch. #8 condition, low use unit with all original parts, fully cleaned, tested and serviced.
10 channel, 48v phantom power, line/mic inputs (XLR). Direct out, access loop, very high quality 3 band EQ. RCA ins and outs. Excellent condition, very clean, works very well. Fully serviced by Audio Pro. #9 condition. (Quality road case with aluminum edges and recessed clasps $88 extra).
Rackmount mixer with ten mic inputs, ten channel inserts, six stereo inputs, six aux sends, four buss outs, 4-band EQ. Unit uses high quality SSM mic preamp IC, the same as $10000 professional mixing consoles! Mint condition in original box and packing, manual included. Unit has been in storage all its life.
