Audio Proz Service and Sales

eBay Facebook

Category:

Cassette Parts
( 1030 Cassette Parts sorted by Price High to Low.)
Image 1 Image 2
Filter Results:
Image 1 Image 2
Filter Results:
Bose AW-1 cassette transport assembly
# 60387
Good rubber in mechanics, working. This unit has seen very little use but may need basic cleaning upon installation. Low use heads, only minor wear of belts, good transport, #9 condition
$ 120
Contact
AW-1 Bose Cassette Deck Assembly Only
# 60450
All parts intact. Low use. Belts are all good #9 condition. This machine has seen very little use but may need cleaning upon install. 9.
$ 100
Contact
Dayton Audio (1) PA 380-8 15" Pro PA woofer 8 OHM
# 59533
($96 each) Large mag 500 w/rms. New in the box condition.
$ 96
Contact
Teac 122 MkII cassette assembly
# 46582
Cassette assembly with heads (5569130, 55696061) Small parts, springs. Pulleys, gears, mechanics. Call for transport parts also. Wires with board connectors still attached. (1) Pinch roller, needs rerubber. Be prepared to call about specific parts needed. #9 condition
$ 88
Contact
Bose Aw-1 Transport
# 48794
Includes Motor MMI-6A2RK 12V CW. Cassette Load housing, all heads & rollers & belts (belts are getting soft but still good, for set up use) #9 condition
$ 80
Contact
We clean, service, repair and calibrate cassette and DAT cassette machines. We have many parts available for all brands. Email us at sales@audioproz.com or call (617)926-8020 for details.
Tascam 134 Rec/Play head #53786012
# 60704
With wiring harness, Head is 90% good with correct wear pattern, used in 234 +246 models. #9 condition.
$ 68
Contact
Pioneer PHM-103E-M03 motor
# 45997
12v brushless motor, with electronic servo board. Not numbered. Excellent #9 condition, tested.
$ 68
Contact
Bose AW-1 display board MPC-1543D
# 48725
Switch and display board. #10 New.
$ 68
Contact
Nakamichi 482 Motor
# 73209
(used in many other units too) MMN-6A2MKXA 12volt CCW this the better version Matsushita part with Nakamichi LOGO. Same motor as EG-510 ED-2B and also RF-260T
$ 68
Contact
Tascam 424 MKIII Rec/Play Head
# 73161
Rec/Play Head Number: 53786012, (1) Available with all original wiring & connectors, Condition: 9.
$ 68
Contact
Bose AW-1 series Main Board
# 72731
This version board has no # but is same as RN-MPM-2742E but has Tape Aux micro switch at board. Send a picture of your board and we will check to match. Like new #9 condition
$ 68
Contact
Nakamichi BX-1 Cassette Mechanism
# 44824
ORIGINAL PART. Entire cassette mechanism from a Nakamichi BX-1. Includes heads, belts, motor, etc. Head may be 70 % good. (call us-prices vary upon condition) Sorry but we recently sold the part. There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermitant or non-functional. The aging of deck mechanism now requires a few modifications to make it reliable. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. There's a service trick to accomplish this. Most people send the unit in. Right now, we have idler assemblies only for in shop service fixes. Typical repair is $200 and usually includes return shipping. Nakamichi did not make this complete machine. The transport is cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. We have been fixing this stuff for 30 years.
$ 66
Contact
GC Electrics Bulk Tape Eraser
# 58897
Handheld High-Flux bulk eraser. 112V AC. 8/10 very good condition.
$ 66
Contact
Bose AW-II tuner PCB 144927
# 46044
New stock, complete with cables, tuner PCB for Bose Acoustic Wave 2.
$ 65
Contact
We have been selling and repairing professional and consumer audio equipment for over 40 years. (Read some of our customers testimonials here)
We keep our database up to date with over 10,000 items in stock.
If you see a part number and a price, we have that item in stock.
Customers outside of the US, please note that international shipping can be costly (US Post $24 minimum - up to 8oz or 226g).
We are glad to combine orders to reduce shipping costs.
Take a look at our shipping policies for more information and estimates of prices and shipping time.
Aiwa AD-WX808 Transports
# 71723
Auto reverse mech. Needs belt, but auto reverse head, cycling gears, motors are all good. Virtually unused. Needs belts Condition 9
$ 60
Contact
Marantz SD555
# 59140
Stereo double cassette deck SD555. Complete cassette transport. With EG530KD-2B Motor.
$ 58
Contact
Bose AW-1 EQ slider board
# 48726
Part #136744, RN-MPC-15450. Excellent condition #9.
$ 58
Contact
Bose AW-1 Cassette Radio Main Board
# 72732
(read carefully) This main board version has no board #, it is 10. 5 inches long , 5 inches wide, AC Power connector is at center edge of board. There are 2 versions of this board, same function, but one has fuse breaker, New #10 condition
$ 58
Contact
Denon DRW-585
# 71948
Deck A "playback" only. Transport. Complete: Auto Reverse Head, Motor, Belts, Capstan/Pinch Rollers. Good Condition #9
$ 58
Contact
Bose AW1 EQ slider board RN-MPC-2079B
# 48723
Part #136744, Excellent #9 condition.
$ 58
Contact
Sony D-009F
# 71377
CCW motor. Low use. Condition 9.
$ 58
Contact
Pioneer CT-F6161
# 55124
For parts. Single well deck, silver face with V/U meters. Some controls frozen. Unit is totally intact but needs service. Excellent face cosmetics, low use, condition: 7+
$ 48
Contact
Sankyo capstan motor BFB2L9Z
# 51584
With dual belt nylon pulley. CCW. Excellent condition. #9 condition. See 48546 / 60116.
$ 48
Contact
If you are having trouble finding parts, enter the name into our search bar at the top of the page. Please be aware there is a minimum $4-$6 to ship any part. International orders will be $24-$26 to ship for anything larger than an envelope. Shipping costs are non negotiable, so please, PLEASE do not ask for a part, or for us to search for, or quantify a part if you cannot pay for the shipping.
Denon motor #VA700B05
# 57057
Loading motor with helical gear. This part is used, fully tested and working. Condition: 8
$ 48
Contact
Kenwood KX-58W
# 53462
Transport right deck. Good belts. With rare motor SHW2L. #8 condition. Motor oiled. Tested.
$ 48
Contact
Teac C-3X input selector board
# 46360
Board #5210013900 TP-N88-S. Switches and all parts tested and working in excellent #9 condition.
$ 48
Contact
Sony TC-WR6455S
# 53214
Main motor: MMI-6H2LWK with cycling motor. Tape transport, left side. Bad Belt #8 condition.
$ 48
Contact
Kenwood KX-58W
# 53461
Transport left deck. Good belts with rare motor SHW2L. Value is for the motor. #8 condition. Motor tested. Oiled,
$ 48
Contact
Matsushita MMU-5B2LWA1
# 71513
(4) available, priced individually. DC 12V Motor. Includes removable plastic pulley. Usable in Tascam PortaStudio cassette decks. Condition 9
$ 48
Contact
Sanko Motor
# 70661
Part #: SHU2L. #9 Condition.
$ 48
Contact
Nikko ND-850
# 60078
Intact cassette mach. With MMA-6B2LWA motor, HA12058NT dolby IC. Deck 1 has 50% wear factor. Deck 2 has 10% wear factor (auto reverse mech). Unit needs belts but is cosmetically nice. #9 cosmetics. Worth repair or parts.
$ 48
Contact
Sony TC-WR645S
# 53215
Tape transport, right side. Low use. Bad belt. Unit has motor MMI6H2LWK and cycle-gear motor. Low use mech. 9 condition.
$ 48
Contact
We know you have many options for purchasing audio equipment and parts, and we truly appreciate your business.
We strive to offer good products at competitive prices.
While we can't always match the prices of one isolated reseller, we make up for it by carefully selecting, testing, and finding unique and special rare parts, and we are here for the long run.
We guarantee everything we sell and we hope it helps you to enjoy a great listening experience.
Mitsumi 201-01
# 71381
S. C. Motor. With motor board. Condition #9.
$ 48
Contact
Samson TD30 Expedition Cassette Recorder
# 40474
Installs into Samson Expedition. Record level, Play level, Pitch Control and basic cassette mechanism and transport controls.
$ 48
Contact
Mabuchi EG-510KD-2B
# 71942
12 VDC. 1600/3200 RPM. CCW. 2 Available. Oiled. Good Condition #9
$ 48
Contact
Sankyo BFB2L54 Motor
# 60116
(1) MOTORS, CCW, 4 Wire connection to board. 9/10 condition, known low use tested. See 48546 / 51584.
$ 48
Contact
Tascam 234 Motor
# 70647
Motor with pulley. Part Number: 70001200. Test, Low Use. #9 Condition.
$ 46
Contact
MXN-13FB08B1 Motor
# 71740
Includes metal housing & worm gear. This may work for Nakamichi. Oiled and tested. Condition 9
$ 46
Contact
Matsushita motor MMI-6H2LWK
# 70522
12 VDC CW or CCW operation, (same part as MMI-6H2LWPK for use in TASCAM PORTA STUDIO recorders) from low use salvage machine, (2) available, Tested OK. #9 condition
$ 46
Contact
Matsushita MMU-5B3LNJ
# 71738
DC 12V motor with pulley on axel (standard size for many designs - possible use for turntables). Oiled and tested. Condition 9
$ 46
Contact
Mabuchi EG-500AD-2F
# 71424
12V CW motor. Condition #9.
$ 44
Contact
If you are calling or e-mailing about a motor, especially one that is rare or not specifically listed on our site, please include as many of the following details as possible: the direction the motor spins (clockwise or counterclockwise) when looking down the shaft, the voltage, and the diameter of the axle shaft (measured carefully). Also, a photo of your old motor is very helpful.
Motor BFB2L54
# 60442
2523702-51119B. CCW, Plastic pulley, 4 pin. Tested, oiled, good torque, #8 condition.
$ 44
Contact
MMN-6A7W
# 71379
7V CCW motor. Condition 9.
$ 44
Contact
Mabuchi EG-500AD-2B
# 71420
12V CCW motor with brass pulley (removable). Condition #9.
$ 44
Contact
Teac 71051260
# 71382
CCW motor with pulley. Condition #9.
$ 44
Contact
Technics RS-TR373 complete left side transport
# 56950
With belt motor # MSI-5B2LW. Salvage part in excellent #8+ condition, fully tested and working.
$ 44
Contact
Sankyo GVC2L01 motor
# 49562
12v motor marked 10918-C. New old stock.
$ 44
Contact
Panasonic RXL0046
# 47246
Pinch roller and pinch arm assembly for DAT machine. Used only in stock. Nice condition . Be aware of Panasonic 3700 3800 problem where tape slips out of pinch roller when rewind scan of tape is engaged. It is usually due to spring tension of the pinch roller is weak. The spring is located at the bottom arm end and is difficult to install.
$ 44
Contact
Mabuchi EG-510AD-TD
# 71421
CW motor. Condition #9.
$ 44
Contact
Matsushita Cassette motor
# 71720
Part MMI-6S2RJ DC 12 volt cassette motor. Pulley attached - Used, pulled from defective machine #9 condition
$ 44
Contact
Spare or substitute parts may be available. Email Us at sales@audioproz.com and include a picture and/or the number on the unit. We make excellent spare part selections.
Mabuchi EG-500AD-2B
# 71374
12V CCW Motor. Condition 8+.
$ 44
Contact
Pioneer PHM-103E-M04 motor
# 46072
12v motor with original circuit board and color code leads attached. Perfect condition new old stock.
$ 44
Contact
Teac #71051090 motor
# 46073
Motor with original circuit board, pulley and color code leads attached. All original stock.
$ 44
Contact
JVC TD-W307 Motor MXN-13FB12F
# 53265
(Note: Can use as substitute in Nakamichi BX-series mode counter motor - equivalent to Nakamichi VA700B04. Must drill out holes on mounting plate slightly larger. We supply 2 screws + Washers to mount & current limiting resistor. #9 condition. Tested. Oiled. Sorry but we recently sold the part. There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermittent or non-functional. The aging of deck mechanism now requires a few modifications to make it reliable. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. There's a service trick to accomplish this. Most people send the unit in. Right now, we have idler assemblies only for in shop service fixes. Typical repair is $200 and usually includes return shipping. Nakamichi did not make this complete machine. The transport is cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. We have been fixing this stuff for 30 years.
$ 42
Contact
Denon DR-M11 VA700B05
# 54197
Small motor, with original plastic screw. Can not be used as Nakamichi BX-series mode motor, shaft too big. Tested & lubricated, #9. Sorry but we recently sold the part. There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermittent or non-functional. Nakamichi did not make this complete machine. The transport is Cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. The aging of deck mechanism now requires a few modifications to make it reliable.
There's a service trick to accomplish this. Right now, we have idler assemblies only for in shop service fixes and most people send the unit in. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. Typical repair is $200 and usually includes return shipping. We have been fixing these machines for 30 years.
$ 42
Contact
Motor MCA 9B1
# 54204
(2) Available. Lubricated & tested. (Note: Can use as substitute in Nakamichi BX-series mode Commutator motor - equivalent to Nakamichi VA700B04. Must drill out holes on mounting plate slightly larger. We supply 2 screws & Washers to mount & current limiting resistor. Reuse worm gear from Nakamichi unit. ) Condition #9 Sorry but we recently sold the part. There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermittent or non-functional. The aging of deck mechanism now requires a few modifications to make it reliable. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. There's a service trick to accomplish this. Most people send the unit in. Right now, we have idler assemblies only for in shop service fixes. Typical repair is $200 and usually includes return shipping. Nakamichi did not make this complete machine. The transport is cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. We have been fixing this stuff for 30 years.
$ 42
Contact
Cassette motor MXN-13FB12F
# 47679
Includes 1" length plastic pulley. Excellent condition. (Note: Can use as substitute in Nakamichi BX-series mode counter motor - equivalent to Nakamichi VA700B04. Must drill out holes on mounting plate slightly larger. We supply 2 screws to mount & current limiting resistor. Reuse worm gear from Nakamichi unit. ) Oiled & tested, There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermitant or non-functional. The aging of deck mechanism now requires a few modifications to make it reliable. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. There's a service trick to accomplish this. Most people send the unit in. Right now, we have idler assemblies only for in shop service fixes. Typical repair is $200 and usually includes return shipping. Nakamichi did not make this complete machine. The transport is cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. We have been fixing this stuff for 30 years. Condition #9
$ 42
Contact
Motor RF 510-T with Tascam 134, Idler wheel, compete assy
# 60707
Rubber Idler needs replacing. #9 condition.
$ 42
Contact
JVC TD-W307 Motor
# 53264
MXN-13FB12F . (Note: Can use as substitute in Nakamichi BX-series mode counter motor - equivalent to Nakamichi VA700B04. Must drill out holes on mounting plate slightly larger. We supply 2 screws + Washers to mount & current limiting resistor. #8 condition. Tested. Oiled. Sorry but we recently sold the part. There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermittent or non-functional. The aging of deck mechanism now requires a few modifications to make it reliable. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. There's a service trick to accomplish this. Most people send the unit in. Right now, we have idler assemblies only for in shop service fixes. Typical repair is $200 and usually includes return shipping. Nakamichi did not make this complete machine. The transport is cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. We have been fixing this stuff for 30 years.
$ 42
Contact
All motors are tested for torque and oiled where required. We have prepared years ago to find and salvage parts to help repair nice older equipment. If you have a motor number not listed, show us a nice clear picture and direction of spin. You may also be required to swap your motor pulley. Plastic pulleys slide right off and back on to the new motor. Metal pulleys may require a hot soldering iron on axle to melt glue, then pull off metal pulley and install on axle at same height. PLEASE NOTE THAT SHIPPING INTERNATIONALLY WILL BE A MINIMUM OF $24 EVEN FOR SMALL PARTS.
Pioneer RXB-005 91/04
# 55378
Pinch roller and arm in original plastic bag. NOS Condition #10
$ 42
Contact
Motor MXN-13FB12F
# 53711
Used in JVC and others. With removable nylon pulley, mounting screws, and board "JVCR73HB. " (Note: Can use as substitute in Nakamichi BX-series mode counter motor - equivalent to Nakamichi VA700B04. Must drill out holes on mounting plate slightly larger. We supply 2 screws + Washers to mount & current limiting resistor. Reuse worm gear from Nakamichi unit. ) Oiled and tested #9 condition.
$ 42
Contact
Matsushita Cassette Motor
# 71396
(4) Available, MMI-6H2LWK. DC 12V w/ printed circuit film type connector. With nylon pulleys. Good condition. #9 condition.
$ 40
Contact
12V CCW Motor
# 70885
Standard bolt fit. Tested good. Condition 9.
$ 40
Contact
Realistic STC-84
# 60065
Cassette transport with connectors intact. With MM16H2LWC1 1 direction transport. Tested, works, fully functional. #9 condition.
$ 40
Contact
Matsushita Cassette Motor
# 71397
MMI-6A5HKSA. DC 15V. With brass "dual type" pulley. 2 wire leads, red and blue 6". Used - pulled from salvage unit. Condition #9.
$ 40
Contact
Nakamichi motor PFV2L02
# 49723
With brass pulley. NOS. Sorry but we recently sold the part. There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermittent or non-functional. The aging of deck mechanism now requires a few modifications to make it reliable. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. There's a service trick to accomplish this. Most people send the unit in. Right now, we have idler assemblies only for in shop service fixes. Typical repair is $200 and usually includes return shipping. Nakamichi did not make this complete machine. The transport is cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. We have been fixing this stuff for 30 years.
$ 40
Contact
Mitsumi R14-584
# 71378
Possible use for many others. Condition #9.
$ 40
Contact
Yamaha KX-W262
# 52965
Cassette transport with capstan belt and motor, tested good, uses plug in connector, needs counter belt, left side recording deck with motor #MM1 6HLWK, heads mechanic, minor wear, condition #8
$ 40
Contact
We leave "SOLD" items on our website for machines that we often repair and provide parts for. This is to give you an idea of the products we typically carry, and direct you to alternatives you may not know about - we often have substitutes for out-of-stock parts, and are happy to recommend workarounds and different solutions to common problems.
Matsushita Cassette Motor
# 71398
MMU-5B2LWAI. DC 12V. No pulley - shaft length = 0. 375" = 9. 5mm. 2 available. Used good condition. #9 condition.
$ 40
Contact
MM1-5B6RKF
# 60658
Motor. DC6V. With brass pulley. Salvaged. Condition #9.
$ 40
Contact
Motor #10605020 10323-C
# 48465
Motor with wires and pulley. Used in Marantz PMD 200 type portable recorders Excellent condition.
$ 40
Contact
Tandberg TCD-310 MK II
# 50434
Good for complete parts meters, pinch rollers, head motors ect.
$ 40
Contact
Tascam loading motor RF-130CH
# 49374
For DA-88 and other DAT machines. With pulley. New.
$ 40
Contact
Kenwood X-7WX parts
# 50379
Stereo double auto reverse cassette deck for parts. Only left side deck inside available, all boards intact. IC: HA12088NT, LB1416. Motor MMA6b2LWHX. Needs new belts.
$ 40
Contact
Pioneer CTW801R
# 53473
Transport. Sankyo motor. SHW2L 00. 1219A. Good heads, needs new belts but in good shape. 8 condition.
$ 40
Contact
T-15901
# 70883
Motor with brass pulley. 12V CW. Tested good. Condition 9.
$ 40
Contact
Mabuchi EG-500AD-2B
# 70882
12 VDC motor CCW. With brass pulley. Tests good. Condition 9.
$ 40
Contact
We are presently operating on an APPOINTMENT ONLY basis. Please call us first at (617) 926-8020 or email us at sales@audioproz.com to schedule an appointment before you come into the shop for repairs, rentals, product recommendations, consultations, or anything other than minor purchases.
Special Motor 71580
# 71380
W/ motor board. 3 wire motor. Condition #9.
$ 40
Contact
Mabuchi motor MS15U2LWPC
# 61998
#9 oiled tested Ok.
$ 38
Contact
Nakamichi Idler Arm & tire
# 61697
With spring and clip. Rubber tire is hard but can be rebuilt/ replaced. used in 480,580 series cassette recorders, used salvaged part. This item needs new rubber. .. This is a metal arm to plastic platform with all springs and felt. This is the standard design. #7 condition. The rubber tire is required is our listing # 48209 Sorry but we recently sold the part. There's a lot of requests for this part and we may have another one available in the future. We have ways to fix or adapt another part. The cassette deck is getting old now and will have other issues, such as 2 of the mechanical cycling motors appear to be intermitant or non-functional. The aging of deck mechanism now requires a few modifications to make it reliable. We repair and update, calibrate and do modifications to make the machine reliable and seldom replace the motors. There's a service trick to accomplish this. Most people send the unit in. Right now, we have idler assemblies only for in shop service fixes. Typical repair is $200 and usually includes return shipping. Nakamichi did not make this complete machine. The transport is cybernet and is very good. But the installation of this transport is slightly incorrect and not sufficiently aligned in place to allow perfect calibration of head. We have been fixing this stuff for 30 years.
$ 38
Contact
Realistic Bulk Tape Eraser 44-232
# 52497
Handheld device to bulk erase 7"-10" reels and cassettes. Used, excellent condition.
$ 38
Contact