Marked "RUWIDO" on side, "10K + 1g" on bottom. New, unused. Five available. *At this point the best I have offered to many people is a very similar fader, usually Japanaese with correct length fit hole to hole mount, but 10k or 20k fader value will work virtually the same. Many faders are pulled from wrecked consoles but faders can be cleaned, tightened or sometimes are like new. I will not sell worn faders. Average cost is $8-$14 for basic faders, $14-$22 for these special glass carbon epoxy types. Please show a picture that clearly shows hole to hole length.
5-pin DIN cable, for board to rack power supply. Five feet. Excellent #9 condition. Hill has changed their wiring pattern in cables to interface differently in models. This is a confusing situation, that's why to make a cable is $88; please give us specs from specific model from manual.
12-channel stereo full featured rackmount mixer board. Direct outs, 3-band EQ, individual phantom power per channel, 4 aux send (two prefader, two postfader), low noise class A transistor mic preamps, full monitor/cue/send configurations, insert loop for each channel, low noise modern op amps, socketed IC's, individual channel card construction, long stroke rail faders. Virtually no use time, from Vince's personal studio. Complete cleaning, service, and testing.
10 channel powered mixer with 9-band graphic equalizer, separate main/monitor EQs, and on board 100FX effects processor. 48v Phantom power, Speakon outputs only, 2x350 watts. New in box.
Need your guitar or bass amp tuned up? We are now doing repairs, upgrades, and modifications to all types of guitar amps. Orange, Mesa Boogie, Fender, Marshall, Hughes and Kettner, Peavey, Ampeg, Gibson, Silvertone, etc. Read more about it here
Samson MPL2242
# 48412
Rackmount mixer with ten mic inputs, ten channel inserts, six stereo inputs, six aux sends, four buss outs, 4-band EQ. Unit uses high quality SSM mic preamp IC, the same as $10000 professional mixing consoles! Mint condition in original box and packing, manual included. Unit has been in storage all its life.
16-input, 2/2-bus, mic/line, ultra low-noise mixer with 24-bit multi-effects processor, three band EQ, and twelve balanced line inputs. Excellent condition, like new in box with manual.
Eight channel inputs to two outputs, mixer built into sturdy latching case. XLR inputs and outputs, plus one phono input. By design, no 48v phantom mic supply. Good #7+ condition with some small dings on upper face panel, case in #6 cosmetic condition but still totally functional. All inputs cleaned and lubed, all faders cleaned and tested, full functional QC by AP.
16 channel digital mixer. 8 Xlr in w/ global phantom. 8 1/4". Midi 1/0. Stereo out. With loose hardware and spare pots, unknown working condition, parts or hobby unit. 8 Condistion
6 Channel Mixer/ Recorder. Knobs, controls, cosmetic parts, switches, heads, VO meters, function keydeck broken, cassette lead broken, all other parts. Good. #7 condition.
Dual 2-way speakers with 1 3/8 inch pole holes. Onboard 5-channel mixer. 150W class D power amp. 3 mic/line channels, XLR and 1/4" input. One stereo 1/4" and 3. 5mm input. Packs into single 24lb unit. Cables included. New in box with manual.
8 Channel mixer, XLR Mic In with 48 Volt, 4 Buss, RCA Buss In For Tape, 2 Aux, Inserts all channels, effect send, direct outs, line in, XLR in, inserts, 3 band EQ 2 Mid, bass sweep meters 110mm faders complete clean all controls switch 9+ Condition Excellent + best quality board.
10 Channel mixer. 4 Channel have 80 Hz Roll Off. 4 Channel have XLR in. 2 Channels have insert i/o. 4 Channels have balanced stereo i/o. 6 level controls. PRE/ Post aux. #9 Condition.
4 stereo input mixer with mic ins. Left Ch1/Ch2, 7 band EQ, stereo volume faders, phono/cd line inputs. Right Ch3/Ch4, 7 band EQ, each channel has LED Ch1/Ch2, Ch3/Ch4 faders, Left/Right master faders. Mic/Ch1/Ch2/Ch3/Ch4/ Master monitor selector with level control/phones out 1/4 inch. Echo function with Delay/Repeat controls. Has talk over switches, does semipro or pro level, excellent build, low noise. Fully serviced, virtually unused. 9 condition
P. A. 4 ohm, 8 ohm. 80 watt amp. Runs 28 V, 70 volt line drive. Just one input module (mono) is presently in machine with bass treble adjust, RCA in, with rack ears. Unit has amp in, out. Jumper allow compressor or EQ install. 8+/10 condition.
Need your guitar or bass amp tuned up? We are now doing repairs, upgrades, and modifications to all types of guitar amps. Orange, Mesa Boogie, Fender, Marshall, Hughes and Kettner, Peavey, Ampeg, Gibson, Silvertone, etc. Read more about it here
10 channel, 48v phantom power, line/mic inputs (XLR). Direct out, access loop, very high quality 3 band EQ. RCA ins and outs. Excellent condition, very clean, works very well. Fully serviced by Audio Pro. #9 condition. (Quality road case with aluminum edges and recessed clasps $88 extra).
6 Channel Mixer, with Mic pre's , 4 space rack mt. Very cool vintage look, colored knob caps & amber VU meters ! Cleaned and serviced, ruggedized solder on many boards, 2x cleaning switches and controls. Replaced output controls and new bulbs. *** Truly Amazing High Quality Mixer *** XLR L/R outputs. #9 condition
Top Quality Design with individual channel cards for ease of service. Sweep EQ Midrange, Quality Mic Pre. Mint condition All channel All controls check OK. Virtually no use time ! #9 condition
